SIST EN 302 018-1 V1.1.1:2003
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1: Technical characteristics and test methods
Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1: Technical characteristics and test methods
To develop an Harmonised Standard providing requirements under article 3.2 of the R&TTE Directive covering frequency-modulated radio operating above 68 MHz,, based on existing ITU, EBU & CEPT technical specifications where appropriate.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Oddajniška oprema za frekvenčno modulirane (FM) zvokovne radiodifuzijske storitve – 1. del: Tehnične karakteristike in preskusne metode
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.X]LMVNHElectromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 1: Technical characteristics and test methods33.170Televizijska in radijska difuzijaTelevision and radio broadcasting33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.20Sprejemna in oddajna opremaReceiving and transmitting equipmentICS:Ta slovenski standard je istoveten z:EN 302 018-1 Version 1.1.1SIST EN 302 018-1 V1.1.1:2003en01-december-2003SIST EN 302 018-1 V1.1.1:2003SLOVENSKI
STANDARD
SIST EN 302 018-1 V1.1.1:2003
ETSI EN 302 018-1 V1.1.1 (2002-10)European Standard (Telecommunications series) Electromagnetic compatibilityand Radio spectrum Matters (ERM);Transmitting equipment for theFrequency Modulated (FM)sound broadcasting service;Part 1: Technical characteristics and test methods
SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 2
Reference DEN/ERM-TG17-005-1 Keywords audio, broadcasting, FM, radio, terrestrial, transmitter ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editor@etsi.fr Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2002. All rights reserved.
DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 3
Contents Intellectual Property Rights.6 Foreword.6 Introduction.6 1 Scope.7 2 References.7 3 Definitions, symbols and abbreviations.8 3.1 Definitions.8 3.2 Symbols.9 3.3 Abbreviations.9 4 Technical requirements specifications.9 4.1 Transmitter input configuration.9 4.2 Transmitter output characteristics.9 4.2.1 Rated output power.9 4.2.1.1 Definition.9 4.2.1.2 Method.9 4.2.1.3 Limit.9 4.2.2 Frequency stability.10 4.2.2.1 Definition.10 4.2.2.2 Method of measurement.10 4.2.2.3 Limit.10 4.2.3 Transmitter muting during frequency shift.10 4.2.3.1 Definition.10 4.2.3.2 Method of measurement.10 4.2.3.3 Limit.10 4.2.4 Deviation sensitivity stability.10 4.2.4.1 Definition.10 4.2.4.2 Method of measurement.10 4.2.4.3 Limit.10 4.2.5 Residual AM (Hum and noise).10 4.2.5.1 Definition.10 4.2.5.2 Method of measurement.10 4.2.5.3 Limit.11 4.2.6 Synchronous AM (AM due to FM).11 4.2.6.1 Definition.11 4.2.6.2 Method of measurement.11 4.2.6.3 Limit.11 4.2.7 Modulator performance.11 4.2.7.1 Definition.11 4.2.7.2 Method.11 4.2.7.3 Limit.11 4.2.8 FM Signal to noise ratio (SNR).11 4.2.8.1 Definition.11 4.2.8.2 Method of measurement.12 4.2.8.3 Limit.12 4.2.9 Spurious emissions.12 4.2.9.1 Definition.12 4.2.9.2 Method of measurement.12 4.2.9.3 Limit.12 4.2.10 Out-of-band emissions.13 4.2.10.1 Definition.13 4.2.10.2 Method of measurement.13 4.2.10.3 Limit.13 4.3 Enclosure port measurements (radiated emissions).14 SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 4
4.3.1 Cabinet radiation.14 4.3.1.1 Definition.14 4.3.1.2 Method.14 4.3.1.3 Limits.15 5 Testing for compliance with technical requirements.16 5.1 Measurement Uncertainties.16 5.2 Essential radio test suites.16 5.2.1 Rated output power.16 5.2.1.1 Method of test.16 5.2.1.1.1 Initial conditions.16 5.2.1.1.2 Procedure.16 5.2.1.1.3 Test requirements.16 5.2.2 Frequency stability.17 5.2.2.1 Method of test.17 5.2.2.1.1 Initial conditions.17 5.2.2.1.2 Procedure.17 5.2.2.1.3 Test requirements.17 5.2.3 Transmitter muting during frequency shift.17 5.2.3.1 Method of test.17 5.2.3.1.1 Initial conditions.17 5.2.3.1.2 Procedure.18 5.2.3.1.3 Test requirements.18 5.2.4 Deviation sensitivity stability.18 5.2.4.1 Method of test.18 5.2.4.1.1 Initial conditions.18 5.2.4.1.2 Procedure.18 5.2.4.1.3 Test requirements.18 5.2.5 Residual AM (Hum and noise).18 5.2.5.1 Method of test.18 5.2.5.1.1 Initial conditions.18 5.2.5.1.2 Test requirements.19 5.2.6 Synchronous AM.19 5.2.6.1 Method of test.19 5.2.6.1.1 Initial conditions.19 5.2.6.1.2 Test requirements.19 5.2.7 Modulator performance.19 5.2.7.1 Method of test.19 5.2.7.1.1 Initial conditions.19 5.2.7.1.2 Procedure.19 5.2.7.1.3 Test requirements.20 5.2.8 FM Signal to noise ratio (SNR).20 5.2.8.1 Method of test.20 5.2.8.1.1 Initial conditions.20 5.2.8.1.2 Procedure.20 5.2.8.1.3 Test requirements.20 5.2.9 Spurious emissions.21 5.2.9.1 Method of test.21 5.2.9.1.1 Initial conditions.21 5.2.9.1.2 Procedure.21 5.2.9.1.3 Test requirements.21 5.2.10 Out-of-band emissions.21 5.2.10.1 Method of test.21 5.2.10.1.1 Initial conditions.21 5.2.10.1.2 Procedure.22 5.2.10.1.3 Test requirements.22 5.2.11 Cabinet radiation.22 5.2.11.1 Method of test.22 5.2.11.1.1 Initial conditions.22 5.2.11.1.2 Procedure.22 5.2.11.1.3 Test requirements.23 SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 5
Annex A (normative): Typical measuring arrangements.24 A.1 Test frequency range.24 A.2 Test Suite.24 A.3 Test modulating signal.25 A.4 Testing arrangements for radiated measurements.25 A.5 Test load characteristics.25 Annex B (informative): Bibliography.26 History.27
SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 6
Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document is part 1 of a multi-part deliverable covering transmitting equipment for the Frequency Modulated (FM) sound broadcasting service, as identified below: Part 1: "Technical characteristics and test methods"; Part 2: "Harmonized EN under article 3.2 of the R&TTE Directive".
National transposition dates Date of adoption of this EN: 13 September 2002 Date of latest announcement of this EN (doa): 31 December 2002 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
30 June 2003 Date of withdrawal of any conflicting National Standard (dow): 30 June 2003
Introduction The present document covers a set of non-mandatory technical parameters that are considered to be the minimum requirement for the design and operation of an FM sound broadcasting service. Other documents directly associated with the present document: • EN 302 018-2 [5]; • EN 301 489-11 [6]. SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 7
1 Scope The present document applies to Transmitting equipment for the frequency-modulated sound broadcasting service. The types of equipment covered by the present document are as follows: • Transmitting equipment for frequency modulated sound broadcasting service operating in both Monophonic and Stereophonic operating in the frequency range 68 MHz to 108 MHz. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. • References are either specific (identified by date of publication and/or edition number or version number) or non-specific. • For a specific reference, subsequent revisions do not apply. • For a non-specific reference, the latest version applies. [1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [2] ITU-R Recommendation BS.412: "Planning standards for terrestrial FM sound broadcasting at VHF". [3] EN 60244-13: "Methods of measurement for radio transmitters - Part 13: Performance characteristics for FM sound broadcasting". [4] EN 55011: "Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement". [5] ETSI EN 302 018-2: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Transmitting equipment for the Frequency Modulated (FM) sound broadcasting service; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive". [6] ETSI EN 301 489-11: "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 11: Specific conditions for terrestrial sound broadcasting service transmitters". [7] ITU- R Recommendation BS.468-4: "Measurement of audio-frequency noise voltage level in sound broadcasting". [8] ITU-R Recommendation SM.329: "Spurious emissions". [9] IEC 60489-1: "Methods of measurements for radio equipment used in the mobile services. Part 1: General definitions and standard conditions of measurement". SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 8
3 Definitions, symbols and abbreviations 3.1 Definitions For the purposes of the present document, the following terms and definitions apply: broadcasting service: radio communication service in which the transmissions are intended for direct reception by the general public NOTE: This service may include sound transmissions, television transmissions or other types of transmission. carrier power: average power supplied to the antenna transmission line by a transmitter during one cycle taken under the condition of no modulation class of emission: set of characteristics of an emission, designated by standard symbols, e.g. type of modulation of the main carrier, modulating signal, type of information to be transmitted, and also, if appropriate, any additional signal characteristics composite: See 'Multiplex (MPX) signal'. difference signal: signal theoretically equal to half the difference between the left and right stereophonic signals, and in practice proportional to this difference enclosure port: physical boundary of the apparatus through which electromagnetic fields may radiate or impinge NOTE: In the case of integral antenna equipment, this port is inseparable from the antenna port. mean power: average power supplied to the antenna transmission line by a transmitter during an interval of time sufficiently long compared with the lowest frequency encountered in the modulation envelope taken under normal operating conditions MultiPleX (MPX) signal: contains all information, including the pilot tone and any supplementary signal which is used to frequency modulate the VHF FM transmitter necessary bandwidth: for a given class of emission, the width of the frequency band which is sufficient to ensure the transmission of information at the rate and with the quality required under specified conditions out-of-band emissions: emission on a frequency or frequencies immediately outside the necessary bandwidth which results from the modulation process, but excluding spurious emissions pilot tone: 19 kHz tone used to recover the stereo subcarrier in the stereo-receiver Radio Data System (RDS): signal containing information on programmes and broadcasting network as defined in EN 50067 NOTE: This signal is carried by a subcarrier at 57 kHz, amplitude modulated by the encoded data with suppressed carrier in a frequency band of ± 2,4 kHz. reference bandwidth: bandwidth in which the emission level is specified spurious emissions: emission on a frequency or frequencies which are outside the necessary bandwidth and the level of which may be reduced without affecting the corresponding transmission of information NOTE: Spurious emissions include harmonic emissions, parasitic emissions, intermodulation products and frequency conversion products but exclude out of band emissions. stereo subcarrier: 38 kHz subcarrier used to carry the difference signal sum signal: signal theoretically equal to half of the sum of the left and right stereophonic signals, and in practice proportional to this sum unwanted emissions: consist of spurious emissions and out of band emissions SIST EN 302 018-1 V1.1.1:2003
ETSI ETSI EN 302 018-1 V1.1.1 (2002-10) 9
3.2 Symbols For the purposes of the present document, the following symbols apply: Ω ohms (unit of resistance) µ micro, 10-6 dBc decibels relative to the unmodulated carrier power of the emission V Volts 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: a.c. alternating current AF Audio Frequency EMC Elect
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.