SIST EN 12697-42:2013
(Main)Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
This European Standard specifies a visual method of determining the amount and components of coarse foreign matter in reclaimed asphalt. A method for determining the amount and components of finer foreign matter in reclaimed asphalt is given in Annex A. This method does not completely categorise the foreign matter that can occur in asphalt.
Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in Ausbauasphalt
Diese Europäische Norm legt ein Sichtprüfverfahren zur Bestimmung des Gehalts an groben Fremdstoffen in Ausbauasphalt und deren Bestandteile fest. Ein Verfahren zur Bestimmung des Gehalts an feineren Fremdstoffen in Ausbauasphalt und deren Bestandteile wird in Anhang A angegeben. Dieses Verfahren ist nicht dazu geeignet, die Fremdstoffe, die in Asphalt enthalten sein können, vollständig zu klassifizieren. ANMERKUNG 1 Für die Verwendung von Ausbauasphalt in Asphaltmischgütern ist es wichtig zu wissen, welche Be-standteile im Ausbauasphalt enthalten sind, und die Mengenanteile der groben Fremdstoffe zu kennen, die die Eigen-schaften des Asphaltmischgutes beeinflussen können. ANMERKUNG 2 Das Verfahren ist nicht dazu bestimmt, alle Fremdstoffe zu klassifizieren, sondern sicherzustellen, dass der Gehalt an groben Fremdstoffen auf ein Mindestmaß reduziert wird.
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 42: Quantité de matériaux étrangers présents dans les agrégats d'enrobés
La présente Norme européenne spécifie une méthode visuelle permettant de déterminer la quantité et les
composants de matériaux étrangers grossiers dans les agrégats d'enrobés. Une méthode visant à déterminer
la quantité et les composants de matériaux étrangers grossiers dans les agrégats d'enrobés est fournie à
l'Annexe A. Cette méthode ne permet pas de classer en catégories la totalité des matériaux étrangers
susceptibles d'être présents dans les enrobés.
NOTE 1 En vue de l'utilisation d'agrégats d'enrobés dans les mélanges bitumineux, il est important de connaître les
composants de ces agrégats et de savoir dans quelle proportion sont présents les matériaux étrangers grossiers qui
peuvent influer sur les propriétés du mélange bitumineux.
NOTE 2 La méthode n'est pas destinée à classer en catégories la totalité des matériaux étrangers, mais à s'assurer
que la quantité de matériaux étrangers grossiers est aussi faible que possible.
Bitumenske zmesi - Preskusne metode za vroče asfaltne zmesi - 42. del: Vsebnost nečistoč v asfaltnem granulatu
Ta evropski standard podaja vizualno metodo za določanje količine in sestavin surovih nečistoč v ponovno uporabljenem asfaltu. Metoda za določanje količine in sestavin finejših nečistoč v ponovno uporabljenem asfaltu je podana v dodatku A. Ta metoda nečistoč, ki se lahko pojavijo v asfaltu, ne kategorizira popolnoma.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in AusbauasphaltMélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 42: Quantité de matériaux étrangers présents dans les agrégats d'enrobésBituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 12697-42:2012SIST EN 12697-42:2013en,fr,de01-februar-2013SIST EN 12697-42:2013SLOVENSKI
STANDARDSIST EN 12697-42:20061DGRPHãþD
SIST EN 12697-42:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12697-42
November 2012 ICS 93.080.20 Supersedes EN 12697-42:2005English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 42: Quantité de matériaux étrangers présents dans les agrégats d'enrobés
Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in Ausbauasphalt This European Standard was approved by CEN on 13 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12697-42:2012: ESIST EN 12697-42:2013
EN 12697-42:2012 (E) 2 Content Page Foreword .31 Scope .62 Normative references .63 Terms and definitions .64 Principle .75 Apparatus .76 Preparation of the sample .77 Procedure .78 Expression of results .89 Test report .810 Precision data .9Annex A (informative)
Amount of foreign matter in finer fractions . 10A.1 General . 10A.2 Additional definitions . 10A.3 Apparatus . 10A.4 Preparation of the sample . 10A.5 Procedure . 11A.6 Expression of results . 11A.7 Test report . 11 SIST EN 12697-42:2013
EN 12697-42:2012 (E) 3 Foreword This document (EN 12697-42:2012) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the latest by May 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 12697-42:2005.
Compared with EN 12697-42:2005, the following significant changes have been made: — definition of coarse foreign matter includes 8 mm minimum size; — solvent for hydrocarbons made less specific; — classifications for material brought directly into line with those in EN 13108-8; — source of reclaimed asphalt to be reported clarified; — annex for analysis of finer material added. WARNING — The methods described in this European Standard require the use of solvents that are hazardous to health and are subject to occupational exposure limits as described in relevant legislation and regulations. Exposure levels are related to both handling procedures and ventilation provision and it is emphasised that adequate training should be given to staff employed in the usage of these substances. EN 12697, Bituminous mixtures — Test methods for hot mix asphalt
contains the following parts: Part 1: Soluble binder content Part 2: Determination of particle size distribution Part 3: Bitumen recovery: Rotary evaporator Part 4: Bitumen recovery: Fractionating column Part 5: Determination of the maximum density Part 6: Determination of bulk density of bituminous specimens Part 7: Determination of bulk density of bituminous specimens by gamma rays Part 8: Determination of void characteristics of bituminous specimens Part 9: Determination of the reference density Part 10: Compactability SIST EN 12697-42:2013
EN 12697-42:2012 (E) 4 Part 11: Determination of the affinity between aggregate and bitumen Part 12: Determination of the water sensitivity of bituminous specimens Part 13: Temperature measurement Part 14: Water content Part 15: Determination of the segregation sensitivity Part 16: Abrasion by studded tyres Part 17: Particle loss of porous asphalt specimen Part 18: Binder drainage Part 19: Permeability of specimen Part 20: Indentation using cube or cylindrical specimens (CY) Part 21: Indentation using plate specimens Part 22: Wheel tracking Part 23: Determination of the indirect tensile strength of bituminous specimens Part 24: Resistance to fatigue Part 25: Cyclic compression test Part 26: Stiffness Part 27: Sampling Part 28: Preparation of samples for determining binder content, water content and grading Part 29: Determination of the dimensions of a bituminous specimen Part 30: Specimen preparation by impact compactor Part 31: Specimen preparation by gyratory compactor Part 32: Laboratory compaction of bituminous mixtures by a vibratory compactor Part 33: Specimen prepared by roller compactor Part 34: Marshall test Part 35: Laboratory mixing Part 36: Determination of the thickness of a bituminous pavement Part 37: Hot sand test for the adhesivity of binder on precoated chippings for HRA Part 38: Common equipment and calibration SIST EN 12697-42:2013
EN 12697-42:2012 (E) 5 Part 39: Binder content by ignition Part 40: In situ drainability Part 41: Resistance to de-icing fluids Part 42: Amount of coarse foreign matter in reclaimed asphalt (the present document) Part 43: Resistance to fuel. Part 44: Crack propagation by semi-circular bending test Part 45: Saturation ageing tensile stiffness (SATS) conditioning test Part 46: Low temperature cracking and properties by uniaxial tension tests Part 47: Determination of the ash content of natural asphalts Part 48: Interlayer bonding — Torque bond test (TBT), Shear bond test (SBT), Tensile Adhesion Test (TAT)1) Part 49: Determination of friction after polishing1) Part 50: Resistance to scuffing 1) According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
1) In preparation. SIST EN 12697-42:2013
EN 12697-42:2012 (E) 6 1 Scope Th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.