SIST EN 12697-42:2006

Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt

This document (EN 12697-42:2005) specifies a visual method of determining the amount and components of coarse foreign matter in reclaimed asphalt. This method does not completely categorise the foreign matter that can occur in asphalt.
NOTE 1   For the use of reclaimed asphalt in asphalt mixtures, it is important to know the components in the reclaimed asphalt and to what extent coarse foreign matter is present that can influence the properties of the asphalt mix.
NOTE 2   The method is not intended to categorise all foreign materials but rather to ensure that the amount of coarse foreign materials are minimised.

Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in Ausbauasphalt

Diese Europäische Norm beschreibt das Prüfverfahren zur Bestimmung der Bestandteile und des Gehalts an Fremdstoffen in Ausbauasphalt.
ANMERKUNG   Für die Verwendung von Ausbauasphalt in Asphaltgemischen ist es wichtig zu wissen, welche Bestand-teile im Ausbauasphalt enthalten sind, und die Mengenanteile der Stoffe zu kennen, die die Eigenschaften des Asphalt-mischguts beeinflussen können.

Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie 42: Quantité de matériaux étrangers présents dans les agrégats d'enrobés

Le présent document (prEN 12697-42:2005) décrit une méthode d'essai visuelle  pour déterminer la quantité et les composants de matériaux étrangers grossiers contenus dans des agrégats d’enrobés.
NOTE 1   Afin d'utiliser les agrégats d'enrobés dans les mélanges bitumineux, il est important de connaître leurs composants et de savoir dans quelle proportion sont présents des éléments pouvant influer sur les propriétés du mélange bitumineux.
NOTE 2   Cette méthode n’est pas destinée a classer en catégories tous les matériaux étrangers mais pour s’assurer que la quantité de matériaux grossiers étrangers est minimisée.

Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 42. del: Vsebnost nečistoč pri ponovno uporabljenem asfaltu

General Information

• Status: Withdrawn
• Publication Date: 31-Mar-2006
• Withdrawal Date: 08-Jan-2013
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CES - Roads
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Jan-2013
• Due Date: 31-Jan-2013
• Completion Date: 09-Jan-2013
• Directive: 89/106/EEC - Construction products
• Mandate: M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
• Ref Project: EN 12697-42:2005 - Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt

Relations

• Replaced By: SIST EN 12697-42:2013 - Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
• Effective Date: 01-Feb-2013
• Replaced By: SIST EN 12697-42:2013 - Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of foreign matter in reclaimed asphalt
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12697-42:2006
01-april-2006
%LWXPHQVNH]PHVL±3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVL±GHO
9VHEQRVWQHþLVWRþSULSRQRYQRXSRUDEOMHQHPDVIDOWX
Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse
foreign matter in reclaimed asphalt
Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in Ausbauasphalt
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie
42: Quantité de matériaux étrangers présents dans les agrégats d'enrobés
Ta slovenski standard je istoveten z: EN 12697-42:2005
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-42:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12697-42:2006

---------------------- Page: 2 ----------------------

SIST EN 12697-42:2006
EUROPEAN STANDARD
EN 12697-42
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 93.080.20

English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part
42: Amount of coarse foreign matter in reclaimed asphalt
Mélanges bitumineux - Méthodes d'essai pour mélange Asphalt - Prüfverfahren für Heißasphalt - Teil 42:
hydrocarboné à chaud - Partie 42: Quantité de matériaux Fremdstoffgehalt in Ausbauasphalt
étrangers présents dans les agrégats d'enrobés
This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-42:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12697-42:2006
EN 12697-42:2005 (E)
Content Page
Foreword .3
1 Scope.6
2 Normative references.6
3 Terms and definitions.6
4 Principle.6
5 Apparatus.7
6 Preparation of the sample .7
7 Procedure.7
8 Expression of results.8
9 Test report.8
10 Precision data.8

2

---------------------- Page: 4 ----------------------

SIST EN 12697-42:2006
EN 12697-42:2005 (E)
Foreword
This document (EN 12697-42:2005) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the
latest by January 2008.
WARNING — The methods described in this draft European Standard require the use of solvents that
are hazardous to health and are subject to occupational exposure limits as described in relevant
legislation and regulations. Exposure levels are related to both handling procedures and ventilation
provision and it is emphasised that adequate training should be given to staff employed in the usage
of these substances.
This document is one of a series of standards as listed below.
EN 12697-1, Bituminous mixtures — Test methods for hot mix asphalt — Part 1: Soluble binder content.
EN 12697-2, Bituminous mixtures — Test methods for hot mix asphalt — Part 2: Determination of particle size
distribution.
EN 12697-3, Bituminous mixtures —Test methods for hot mix asphalt — Part 3: Bitumen recovery: Rotary
evaporator.
EN 12697-4, Bituminous mixtures — Test methods for hot mix asphalt — Part 4: Bitumen recovery:
Fractionating column.
EN 12697-5, Bituminous mixtures — Test methods for hot mix asphalt — Part 5: Determination of the
maximum density.
EN 12697-6, Bituminous mixtures — Test methods for hot mix asphalt — Part 6: Determination of bulk density
of bituminous specimens.
EN 12697-7, Bituminous mixtures — Test methods for hot mix asphalt — Part 7: Determination of bulk density
of bituminous specimens by gamma rays.
EN 12697-8, Bituminous mixtures — Test methods for hot mix asphalt — Part 8: Determination of void
characteristics of bituminous specimens.
EN 12697-9, Bituminous mixtures — Test methods for hot mix asphalt — Part 9: Determination of the
reference density.
EN 12697-10, Bituminous mixtures — Test methods for hot mix asphalt — Part 10: Compactability.
EN 12697-11, Bituminous mixtures — Test methods for hot mix asphalt — Part 11: Determination of the
affinity between aggregate and bitumen.
EN 12697-12, Bituminous mixtures — Test methods for hot mix asphalt — Part 12: Determination of the water
sensitivity of bituminous specimens.
EN 12697-13, Bituminous mixtures — Test methods for hot mix asphalt — Part 13: Temperature measure-
ment.
3

---------------------- Page: 5 ----------------------

SIST EN 12697-42:2006
EN 12697-42:2005 (E)
EN 12697-14, Bituminous mixtures — Test methods for hot mix asphalt — Part 14: Water content.
EN 12697-15, Bituminous mixtures — Test methods for hot mix asphalt — Part 15: Determination of the
segregation sensitivity.
EN 12697-16, Bituminous mixtures — Test methods for hot mix asphalt — Part 16: Abrasion by studded tyres.
EN 12697-17, Bituminous mixtures — Test methods for hot mix asphalt — Part 17: Particle loss of porous
asphalt specimen.
EN 12697-18, Bituminous mixtures — Test methods for hot mix asphalt — Part 18: Binder drainage.
EN 12697-19, Bituminous mixtures — Test methods for hot mix asphalt — Part 19: Permeability of specimen.
EN 12697-20, Bituminous mixtures — Test methods for hot mix asphalt — Part 20: Indentation using cube or
Marshall specimens.
EN 12697-21, Bituminous mixtures — Test methods for hot mix asphalt — Part 21: Indentation using plate
specimens.
EN 12697-22, Bituminous mixtures — Test methods for hot mix asphalt — Part 22: Wheel tracking.
EN 12697-23, Bituminous mixtures — Test methods for hot mix asphalt — Part 23: Determination of the
indirect tensile strength of bituminous specimens.
EN 12697-24, Bituminous mixtures — Test methods for hot mix asphalt — Part 24: Resistance to fatigue.
EN 12697-25, Bituminous mixtures — Test methods for hot mix asphalt — Part 25: Cyclic compression test.
EN 12697-26, Bituminous mixtures — Test methods for hot mix asphalt — Part 26: Stiffness.
EN 12697-27, Bituminous mixtures — Test methods for hot mix asphalt — Part 27: Sampling.
EN 12697-28, Bituminous mixtures — Test methods for hot mix asphalt — Part 28: Preparation of samples for
determining binder content, water content and grading.
EN 12697-29, Bituminous mixtures — Test methods for hot mix asphalt — Part 29: Determination of the
dimensions of a bituminous specimen.
EN 12697-30, Bituminous mixtures — Test methods for h
...