SIST EN 27023:1997
(Main)Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983)
Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983)
The principle consists in selection at random of a prescribes number of sacks from the lot following a two-stage procedure. Tables are given to determine the number of selected units and sacks. The method applies to all types of empty sacks
Packmittel - Säcke - Verfahren zur Probenahme leerer Säcke für die Prüfung (ISO 7023:1983)
Emballages - Sacs - Méthode d'échantillonnage de sacs vides pour essais (ISO 7023:1983)
La présente Norme internationale spécifie une méthode pour l'obtention d'un échantillon représentatif de sacs d'emballage vides pour essais. La présente Norme internationale est applicable dans le cas d'un échantillonnage destiné à établir la qualité moyenne d'une expédition limitée de sacs vides. La méthode ne convient pas à un échantillonnage pour un contrôle de production. La méthode s'applique à tous les types de sacs vides.
NOTE -- Il faut noter que l'échantillon est seulement représentatif des sacs disponibles pour l'échantillonnage. Il faudra être très prudent dans l'extrapolation des résultats d'un tel échantillonnage à une expédition plus importante.
Embalaža - Vreče - Metoda vzorčenja za preskušanje praznih vreč (ISO 7023:1983)
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Packmittel - Säcke - Verfahren zur Probenahme leerer Säcke für die Prüfung (ISO 7023:1983)Emballages - Sacs - Méthode d'échantillonnage de sacs vides pour essais (ISO 7023:1983)Packaging - Sacks - Method of sampling empty sacks for testing (ISO 7023:1983)55.080Sacks. BagsICS:Ta slovenski standard je istoveten z:EN 27023:1992SIST EN 27023:1997en01-maj-1997SIST EN 27023:1997SLOVENSKI
STANDARD
SIST EN 27023:1997
SIST EN 27023:1997
SIST EN 27023:1997
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATIONWE)I(C\YHAPOAHAR OPTAHM3AUMR fl0 CTAHAAPTH3AWlM~RGANISATION INTERNATIONALE DE NORMALISATION Packaging - Sacks - Method of sampling empty Sacks for testing Embaflages - Sacs - NIethode d’khantilfonnage de sacs vides pour essais First edition - 1983-02-15 w - UDC 621.798.15 : 676.821 : 620.11 Ref. No. ISO 70234983 (E) Descrigtors : packages, bags, sampling. Price based on 2 pages SIST EN 27023:1997
Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of developing International Standards is carried out through ISO technical committees. Every member body interested in a subject for which a technical committee has been authorized has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. International Standard ISO 7023 was developed by Technical Committee ISO/TC 122, Packaging, and was circulated to the member bodies in February 1982. lt has been approved by the member bodies of the following countries : Australia Germany, F. R. Austria India Belgium I reland Brazil Israel Canada Italy Denmark Japan Egypt, Arab Rep. of Malaysia Finland Netherlands France Romania No member body expressed disapproval of the document. 0 International Organkation for Standardkation, 1983 South Africa, Rep. of Spain Sweden Turkey United Kingdom USSR Y ugoslavia Printed in Switzerland SIST EN 27023:1997
INTERNATIONAL STANDARD ISO 7023-1983 (E) Packaging - Sacks - Method of sampling empty Sacks for testing 1 Scope and field of application This International Standard specifies a method of obtaining a representative Sample of empty Sacks for testing. This International Standard is applicable when sampling in Order to assess the average quality of a consignment of empty Sacks. The method is not suited to sampling for production control. The method applies to all types of empty Sacks. NOTE - It should be noted that the Sample is representative only of those Sacks available for sampling. Considerable caution should be ex- ercised when extrapolating the results from such sampling to a larger consignment. 2 References ISO 106, Paper and board - Sampling for testing. ISO 3951, Sampling procedures and Charts for inspection by variables for percen t defective. 3 Definitions For the purpose of this International Standard, the following definitions apply. 3.1 lot : The aggregate of Sacks which are of a Single kind with specified characteristics, on which a judgement is desired (usually as to compliance with specification) and which are available for sampling. NOTES 1 The number of Sacks comprising a lot may be indicated on the in- voice or agreed upon by the contracting Parties. 2 When the number of Sacks available for sampling is less than the lot size agreed or indicated on the invoice, the total number of Sacks available may be taken as a lot subject to the caution given in the note to clause 1. 3.2 unit : The unit may be in the form of a bundle, bale, pallet load, Container load, etc. One or more nominally identical units constitute a lot. 3.3 element : The element may be in the form of a b
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.