SIST EN 2713-012:2017
(Main)Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
Aerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard
This European Standard specifies the characteristics of UV laser printable, single and multicore silver
plated copper screened (spiral) and jacketed electrical cables for use in the on-board electrical systems
of aircraft, at operating temperatures between − 55 °C and 200 °C.
It shall also be possible to mark these cables by qualified compatible marking. These markings shall be
in accordance with EN 3838.
Luft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 012: MNA- (einadrig), MNB- (zweiadrig), MNC- (dreiadrig), MND- (vieradrig) Leitungsfamilie - mit versilbertem Kupfergeflecht geschirmt (Umseilung) und ummantelt, UV-Laser-bedruckbar - Produktnorm
Série aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre – 55 °C et 200 °C - Partie 012: MNA (1 élément), MNB (paire), MNC (tierce), MND (quarte), série de câbles multiconducteurs à blindage cuivre argenté (guipés et gainés), marquables au laser UV - Norme de produit
Aeronavtika - Eno- ali večžilni električni kabli za splošno uporabo - Delovne temperature med –55 °C in 200 °C - 012. del: MNA (1 jedro), MNB (združitev), MNC (3 jedra), MND (4 jedra), družina kablov - Posrebren baker, oklopljen (spirala) in oplaščen, z možnostjo UV-laserskega tiskanja - Standard za proizvod
Ta evropski standard določa značilnosti eno- ali večžilnih, oklopljenih (spirala) ali oplaščenih električnih kablov iz posrebrenega bakra z možnostjo UV-laserskega tiskanja za uporabo v električnih sistemih na krovu letala pri delovnih temperaturah med −55 °C in 200 °C.
Te kable je mogoče označiti s kvalificirano združljivo oznako. Te oznake morajo biti v skladu s standardom EN 3838.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RGLuft- und Raumfahrt - Leitungen, elektrisch, ein- und mehradrig, für allgemeine Verwendung - Betriebstemperaturen zwischen -55 °C und 200 °C - Teil 012: MNA- (einadrig), MNB- (zweiadrig), MNC- (dreiadrig), MND- (vieradrig) Leitungsfamilie - mit versilbertem Kupfergeflecht geschirmt (Umseilung) und ummantelt, UV-Laser-bedruckbar - ProduktnormSérie aérospatiale - Câbles, électriques, mono et multiconducteurs d'usage général - Températures de fonctionnement comprises entre – 55 °C et 200 °C - Partie 012: MNA (1 élément), MNB (paire), MNC (tierce), MND (quarte), série de câbles multiconducteurs à blindage cuivre argenté (guipés et gainés), marquables au laser UV - Norme de produitAerospace series - Cables, electrical, single and multicore for general purpose - Operating temperatures between - 55 °C and 200 °C - Part 012: MNA (1 core), MNB (pair), MNC (3 cores), MND (4 cores), cables family - Silver plated copper screened (spiral) and jacketed, UV laser printable - Product standard49.060Aerospace electric equipment and systems29.060.20KabliCablesICS:Ta slovenski standard je istoveten z:EN 2713-012:2017SIST EN 2713-012:2017en,fr,de01-maj-2017SIST EN 2713-012:2017SLOVENSKI
STANDARD
SIST EN 2713-012:2017
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2713-012
March
t r s y ICS
v {ä r x r English Version
Aerospace series æ Cablesá electricalá single and multicore for general purpose æ Operating temperatures between æ
w w
¹C and
t r r
¹C æ Part
r s tã MProduct standard Série aérospatiale æ Câblesá électriquesá mono et multiconducteurs d 5usage général æ Températures de fonctionnement comprises entre æ
w w
¹C et
t r r
¹C æ
Luftæ und Raumfahrt æ Leitungená elektrischá einæ und mehradrigá für allgemeine Verwendung æ Betriebstemperaturen zwischen æ w w
¹C und
t r r
¹C æ und ummanteltá UVæLaseræbedruckbar æ ProduktnormThis European Standard was approved by CEN on
t January
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
t y s uæ r s tã t r s y ESIST EN 2713-012:2017
EN 2713-012:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms, definitions and symbols . 4 4 Materials and construction . 5 5 Required characteristics . 7 6 Quality assurance . 9 7 Designation . 9 8 Identification and marking . 9 9 Packaging, labelling and delivery lengths . 9 10 Technical specification . 9
SIST EN 2713-012:2017
EN 2713-012:2017 (E) 3 European foreword This document (EN 2713-012:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by September 2017, and conflicting national standards shall be withdrawn at the latest by September 2017. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 2713-012:2017
EN 2713-012:2017 (E) 4 1 Scope This European Standard specifies the characteristics of UV laser printable, single and multicore silver plated copper screened (spiral) and jacketed electrical cables for use in the on-board electrical systems of aircraft, at operating temperatures between
55 °C and 200 °C. It shall also be possible to mark th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.