SIST EN 13302:2003
(Main)Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus
Bitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus
This European Standard specifies a method for the determination of the dynamic viscosity of bituminous binders at a range of temperatures by means of a coaxial viscometer. The typical range of application is from 50°C to 250°C using a rotating spindle apparatus. The method can be used to measure the apparent viscosity of bitumen at application temperatures.
Bitumen und bitumenhaltige Bindemittel - Bestimmung der Viskosität von Bitumen mit einem Rotationsviskosimeter
Diese Europäische Norm legt ein Verfahren zur Bestimmung der dynamischen Viskosität von bitumenhaltigen Bindemitteln in einem bestimmten Temperaturbereich mit einem koaxialen Viskosimeter fest. Das Verfahren wird üblicherweise in einem Temperaturbereich von 50°C bis 250°C unter Anwendung eines Rotationsviskosimeters durchgeführt. Das Verfahren kann angewendet werden, um die scheinbare Viskosität von Bitumen im Bereich der Anwendungstemperaturen zu bestimmen.
Bitumes et liants bitumineux - Détermination de la viscosité a l'aide d'un viscosimetre rotatif
La présente norme européenne prescrit une méthode de détermination de la viscosité dynamique des liants bitumineux dans une plage de températures au moyen d'un viscosimetre coaxial. La gamme d'applications type va de 50 °C a 250 °C en utilisant un appareillage a mobile tournant.
On peut utiliser cette méthode pour mesurer la viscosité apparente du bitume aux températures d'application.
NOTE Certains bitumes peuvent révéler un comportement non newtonien dans les conditions de la présente méthode. Étant donné que des valeurs de viscosités non newtoniennes ne résultent pas des propriétés du seul matériau mais refletent le comportement du fluide et du systeme de mesure, il convient d'admettre que les mesures prises en utilisant la présente méthode peuvent ne pas toujours prédire sa performance dans les conditions d'usage. Il convient de faire des comparaisons entre des viscosités non newtoniennes uniquement pour des mesures faites dans des conditions identiques de contrainte de cisaillement et de taux de cisaillement.
AVERTISSEMENT - L'utilisation de la présente Norme européenne peut impliquer l'intervention de produits, d'opérations et d'équipements a caractere dangereux. La présente norme européenne n'est pas censée aborder tous les problemes de sécurité concernés par son usage. Il est de la responsabilité de l'utilisateur de consulter et d'établir des regles de sécurité et d'hygiene appropriées et de déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva – Določanje viskoznosti bitumnov z rotacijskim viskozimetrom
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.RWDFLMVNLPYLVNR]LPHWURPBitumen und bitumenhaltige Bindemittel - Bestimmung der Viskosität von Bitumen mit einem RotationsviskosimeterBitumes et liants bitumineux - Détermination de la viscosité a l'aide d'un viscosimetre rotatifBitumen and bituminous binders - Determination of viscosity of bitumen using a rotating spindle apparatus91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 13302:2003SIST EN 13302:2003en01-december-2003SIST EN 13302:2003SLOVENSKI
STANDARD
SIST EN 13302:2003
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13302April 2003ICS 75.140; 91.100.50English versionBitumen and bituminous binders - Determination of viscosity ofbitumen using a rotating spindle apparatusBitumes et liants bitumineux - Détermination de la viscositéà l'aide d'un viscosimètre tournantBitumen und bitumenhaltige Bindemittel - Bestimmung derViskosität von Bitumen mit einem RotationsviskosimeterThis European Standard was approved by CEN on 17 January 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13302:2003 ESIST EN 13302:2003
EN 13302:2003 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Principle.55Apparatus.56Sampling.57Procedure.58Expression of results.69Precision.69.1Repeatability.69.2Reproducibility.610Test report.7SIST EN 13302:2003
EN 13302:2003 (E)3ForewordThis document (EN 13302:2003) has been prepared by Technical Committee CEN /TC 336 "Bituminous binders",the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by October 2003, and conflicting national standards shall be withdrawn at the latestby October 2003.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13302:2003
EN 13302:2003 (E)41 ScopeThis European Standard specifies a method for the determination of the dynamic viscosity of bituminous binders ata range of temperatures by means of a coaxial viscometer. The typical range of application is from 50 °C to 250 °Cusing a rotating spindle apparatus.The method can be used to measure the apparent viscosity of bitumen at application temperatures.NOTESome bitumens may exhibit non-Newtonian behaviour under the conditions of this method. Since non-Newtonianviscosity values are not unique material properties, but reflect the behaviour of the fluid and the measurement system, it shouldbe recognised that measurements made by this method may not always predict performance under the conditions of use.Comparisons between non-Newtonian viscosities should be made only for measurements under similar conditions of shearstress and shear rate.WARNING — The use of this standard may involve hazardous materials, operations and equipment. Thisstandard does not purport to address all of the safety problems associated with its use. It is theresponsibility of the user of this standard to establish appropriate safety and health practices and todetermine the applicability of regulatory limitations
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.