oSIST prEN 3155-016:2024

Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard

This document specifies the required characteristics, tests and tooling applicable to male electrical contacts, type A, crimp, class S, used in elements of connection according to EN 3155 002.
It is used together with EN 3155 001.
The tests as applied in this standard do not permit the full qualification and shall be completed with associated components.

Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen - Teil 016: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - Produktnorm

Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie 016 : Contacts électriques, mâles, type A, à sertir, classe S - Norme de produit

Le présent document spécifie les caractéristiques requises, les essais et l’outillage applicables aux contacts électriques mâles, de type A, à sertir, de classe S, utilisés dans les organes de connexion suivant l’EN 3155-002.
Il est utilisé conjointement avec l’EN 3155-001.
Les essais tels qu’ils sont appliqués dans la présente norme ne permettent pas la qualification complète et doivent être complétés avec des composants associés.

Aeronavtika - Električni kontakti za uporabo v veznih elementih - 016. del: Kontakti, električni, moški, tip A, stisljivi, razred S - Standard za proizvod

General Information

• Status: Not Published
• Public Enquiry End Date: 05-May-2024
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 07-Feb-2024
• Due Date: 26-Jun-2024
• Ref Project: prEN 3155-016 - Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard

Relations

• Revises: SIST EN 3155-016:2020 - Aerospace series - Electrical contacts used in elements of connection - Part 016: Contacts, electrical, male, type A, crimp, class S - Product standard
• Effective Date: 02-Aug-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 3155-016:2024
01-maj-2024
Aeronavtika - Električni kontakti za uporabo v veznih elementih - 016. del:
Kontakti, električni, moški, tip A, stisljivi, razred S - Standard za proizvod
Aerospace series - Electrical contacts used in elements of connection - Part 016:
Contacts, electrical, male, type A, crimp, class S - Product standard
Luft- und Raumfahrt - Elektrische Kontakte zur Verwendung in Verbindungselementen -
Teil 016: Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S - Produktnorm
Série aérospatiale - Contacts électriques utilisés dans les organes de connexion - Partie
016 : Contacts électriques, mâles, type A, à sertir, classe S - Norme de produit
Ta slovenski standard je istoveten z: prEN 3155-016
ICS:
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 3155-016:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 3155-016:2024

---------------------- Page: 2 ----------------------
oSIST prEN 3155-016:2024


DRAFT
EUROPEAN STANDARD
prEN 3155-016
NORME EUROPÉENNE

EUROPÄISCHE NORM

February 2024
ICS 49.060 Will supersede EN 3155-016:2019
English Version

Aerospace series - Electrical contacts used in elements of
connection - Part 016: Contacts, electrical, male, type A,
crimp, class S - Product standard
Série aérospatiale - Contacts électriques utilisés dans Luft- und Raumfahrt - Elektrische Kontakte zur
les organes de connexion - Partie 016 : Contacts Verwendung in Verbindungselementen - Teil 016:
électriques, mâles, type A, à sertir, classe S - Norme de Elektrische Stiftkontakte, Typ A, crimpbar, Klasse S -
produit Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3155-016:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 3155-016:2024
prEN 3155-016:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 5
4.1 Specific characteristics . 5
4.2 Dimensions, mass . 5
4.3 Marking .
...