SIST EN ISO 1797-1:2000

Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992)

Specifies four types. Gives measurement methods for the verification of dimensions. Includes quality control requirements.

Zahnärztliche rotierende Instrumente - Schäfte - Teil 1: Schäfte aus Metall (ISO 1797-1:1992)

Diese Internationale Norm enthält Festlegungen für Schäfte zahnärztlicher rotierender Instrumente und legt Verfahren zur Nachprüfung der Maße fest. Um einen hohen Qualitätsstandard sicherzustellen, wurde eine Anforderung an die Qualitätskontrolle aufgenommen. Teil 1 der ISO 1797 enthält Festlegungen für Schäfte aus Metall während Teil 2 Schäfte aus Kunststoff spezifiziert.

Instruments rotatifs dentaires - Queues - Partie 1: Queues en matériaux métalliques (ISO 1797-1:1992)

La présente partie de l'ISO 1797 prescrit des spécifications pour les queues d'instruments rotatifs dentaires ainsi que des méthodes de mesurage pour la vérification des dimensions. Dans le but d'assurer un haut niveau de qualité, elle donne la description d'un contrôle de la qualité. La partie 1 de l'ISO 1797 prescrit des spécifications pour les queues en matériaux métalliques alors que la partie 2 s'applique aux queues en matières plastiques.

Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992)

General Information

• Status: Withdrawn
• Publication Date: 31-Dec-1999
• Withdrawal Date: 07-Nov-2011
• ICS: 11.060.25 - Dental instruments
• Technical Committee: VAZ - Healthcare
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 08-Nov-2011
• Due Date: 01-Dec-2011
• Completion Date: 08-Nov-2011
• Ref Project: EN ISO 1797-1:1995 - Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992)

Relations

• Amended By: SIST EN ISO 1797-1:2000/A1:2000 - Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992/Amendment 1:1997)
• Effective Date: 22-Dec-2008
• Replaced By: SIST EN ISO 1797-1:2011 - Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO 1797-1:2011)
• Effective Date: 01-Dec-2011
• Amended By: SIST EN ISO 1797-1:2000/A1:2000 - Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992/Amendment 1:1997)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 1797-1:2000
01-januar-2000
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-
1:1992)
Dental rotary instruments - Shanks - Part 1: Shanks made of metals (ISO 1797-1:1992)
Zahnärztliche rotierende Instrumente - Schäfte - Teil 1: Schäfte aus Metall (ISO 1797-
1:1992)
Instruments rotatifs dentaires - Queues - Partie 1: Queues en matériaux métalliques (ISO
1797-1:1992)
Ta slovenski standard je istoveten z: EN ISO 1797-1:1995
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
SIST EN ISO 1797-1:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 1797-1:2000

---------------------- Page: 2 ----------------------

SIST EN ISO 1797-1:2000

---------------------- Page: 3 ----------------------

SIST EN ISO 1797-1:2000

---------------------- Page: 4 ----------------------

SIST EN ISO 1797-1:2000
- INTERNATIONAL.
STANDARD
First edition
1992-02-l 5
- --------__I___--
Dental rotary instruments - Shanks -
Part 1:
Shanks made of metals
Instruments rotatifs dentaires - Queues -
Partie I: Queues en mat&iaux m&talliques
Reference number
-- --
__._ ~.--~--T ‘I-T: IS0 1797-l :1992(E)
_.

---------------------- Page: 5 ----------------------

SIST EN ISO 1797-1:2000
IS0 17974:1992(E)
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. IS0 collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard IS0 1797-1 was prepared by Technical Committee
ISO/TC 106, Dentistry, Sub-Committee SC 4, Dental instruments.
The first edition of IS0 1797-1, together with IS0 1797-2, cancel and re-
place the second edition of IS0 1797 published in 1985, of which they
constitute a technical revision.
IS0 1797 consists of the following parts, under the general title Dental
rotary instruments - Shanks:
- Part I: Shanks made of metals
- Part 2: Shanks made of plastics
Annex A of this part of IS0 1797 is for information only.
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronic or mechanical, including photocopying and microfilm, without
permission in writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-121 1 Gen&e 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 6 ----------------------

SIST EN ISO 1797-1:2000
IS0 17974:1992(E)
Introduction
This International Standard is one of a series of basic standards on
dental rotary instruments and constitutes an important link between the
standards on dental rotary instruments and those on dental handpieces.
. . .
III

---------------------- Page: 7 ----------------------

SIST EN ISO 1797-1:2000
This page intentionally left blank

---------------------- Page: 8 ----------------------

SIST EN ISO 1797-1:2000
INTERNATIONAL STANDARD IS0 1797=1:1992(E)
Dental rotary instruments - Shanks -
Part 1:
Shanks made of metals
IS0 3274:1975, Instruments for the measurement of
1 Scope
surface roughness by the profile method - Contact
(stylus) instruments of consecutive profile trans-
This International Standard specifies shanks of
formation - Contact profile meters, system M.
dental rotary instruments and gives measurement
methods for the verification of the dimensions. A
IS0 4288:1985, Rules and procedures for the
quality control requirement is added in order to en-
measurement of surface roughness using stylus in-
sure a high quality level.
struments.
Part 1 of IS0 1797 specifies shanks made of metals
IS0 6507-1:1982, Metallic materials - Hardness test
while part 2 specifies shanks made of plastics.
- Vickers test - Part I: HV 5 to HV 100.
3 Classification
2 Normative references
The shanks of dental rotary instruments are classi-
fied into the following types, according to their di-
ameters and design:
The following standards contain provisions which,
through reference in this text, constitute provisions
Type I: diameter 2,35 mm with groove and flat;
of this part of IS0 1797. At the time of publication,
the editions indicated were valid. All standards are
subject to revision, and parties to agreements based
...