Abstract

Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation

Status
Published
Publication Date
30-Nov-2003
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2003
Due Date
01-Dec-2003
Completion Date
01-Dec-2003
Mandate
BC-T-344

Buy Documents

Standard

SIST EN 300 394-4-11 V1.1.1:2003

English language (46 pages)
Preview
Preview
e-Library read for
×1 day

SIST EN 300 394-4-11 V1.1.1:2003 is the SIST adoption of the ETSI European Standard for Terrestrial Trunked Radio (TETRA) Direct Mode Operation (DMO) conformance testing. It specifies the Test Suite Structure (TSS) and Test Purposes (TPs) used to test the protocol behavior of the Mobile Station Repeater type 2 (MS-REP2) air interface, so test labs and manufacturers can build conformance tests from the same basis.

What does SIST EN 300 394-4-11 V1.1.1:2003 specify?

SIST EN 300 394-4-11 V1.1.1:2003 specifies protocol conformance testing for TETRA DMO mobile stations, with the focus on the MS-REP2 air interface protocol. Testing of security features is outside its scope.

The document is organized around the test suite structure, the introduction to test purposes, and the detailed test purposes for DMCC and MAC. It also uses TTCN methodology and defines preambles, postambles, and selection expressions so test cases can be chosen according to the implementation options claimed.

What are the key requirements of SIST EN 300 394-4-11 V1.1.1:2003?

The main point of SIST EN 300 394-4-11 V1.1.1:2003 is not a product requirement list, but a structured set of conformance tests. Clause 4 groups the tests by layer and by test type, and clause 5 defines how each test purpose is written and selected. In practice, this tells a test laboratory how to set up the implementation under test (IUT), what to stimulate, and what observable response counts as a pass.

Test suite structure and test selection

  • Clause 4 splits the suite into Direct Mode Call Control (DMCC) and Medium Access Control (MAC) layers. This matters because the tester must verify both call control behavior and layer 2 channel behavior.
  • Each layer has Capability tests (CA), Valid Behaviour tests (BV), and Timer tests (TI). CA checks claimed options, BV checks reactions to valid stimuli, and TI checks timeout handling.
  • Clause 5 defines the TP record fields: name, reference, purpose, test description, pass criteria, selection expression, preamble, and postamble. That gives a traceable link from a test case back to the protocol requirement.

Starting and ending a test

  • The preambles bring the IUT from idle into states such as TX occupation, TX reservation, RX occupation, or RX reservation, sometimes with presence check and sometimes without it. This matters because the same feature may behave differently depending on call state.
  • The postambles return the IUT to idle, often after DM-RELEASE or after a channel becomes free. That makes repeated testing possible without manual cleanup.

DMCC test coverage

  • The DMCC CM tests cover outgoing and incoming group or individual calls, with and without presence check, plus rejection, pre-emption, and changeover behavior.
  • The SDS tests cover acknowledged and unacknowledged Short Data Service (SDS), including busy-channel pre-emption cases and retry timing.
  • Timer tests check named timers such as DT303, DT311, and DT316. In practice, these verify that the IUT waits, retries, or reports a timeout when the peer does not respond.

MAC test coverage

  • The MAC tests check fill-bit addition and deletion, DM channel usage procedures, signalling bursts, fragmentation, reconstruction, and pre-emption-related flags.
  • These tests matter because they verify that the radio frame content and burst handling match the protocol rules, not just the higher-level call behavior.

What terms does SIST EN 300 394-4-11 V1.1.1:2003 define?

  • Direct Mode Operation (DMO) - TETRA mode where terminals communicate directly over the air interface for the tested procedures.
  • Direct Mode Call Control (DMCC) - The layer 3 entity tested for call setup, release, pre-emption, changeover, and SDS-related control.
  • Medium Access Control (MAC) - The layer 2 entity tested for channel usage, signalling bursts, and framing behavior.
  • Mobile Station Repeater type 2 (MS-REP2) - The direct mode repeater type covered by this sub-part.
  • Implementation Under Test (IUT) - The equipment or software being exercised by the test system.
  • Protocol Implementation Conformance Statement (PICS) - The declaration of supported options used to select or deselect test cases.
  • Implementation eXtra Information for Testing (PIXIT) - Additional test information needed to run the selected cases correctly.

Who uses SIST EN 300 394-4-11 V1.1.1:2003?

SIST EN 300 394-4-11 V1.1.1:2003 is used by conformance test labs, TETRA equipment manufacturers, and approval teams that need repeatable protocol tests for DMO equipment. It also helps quality and validation teams map implemented options in the PICS/PIXIT to the relevant test cases, then check call control, SDS, timer behavior, and MAC signaling.

What changed in SIST EN 300 394-4-11 V1.1.1:2003 from the previous edition?

The document history shows that the work was first submitted as an ETS and was then converted into an EN during the voting process. The published standard is the EN version, identified as V1.1.1.

Which standards are used with SIST EN 300 394-4-11 V1.1.1:2003?

  • EN 300 396-4 - Supplies the DMO technical requirements that the test purposes check.
  • EN 300 396-7 - Provides the TETRA definitions used in the document.
  • EN 300 396-8-4 - Gives the PICS proformas and selection statements used to select test cases.
  • ISO/IEC 9646-1 - Provides the general conformance testing framework.
  • ISO/IEC 9646-2 - Provides the abstract test suite specification methodology.
  • ETS 300 406 - Gives the ETSI methodology for protocol and profile conformance test specifications.

What does the SIST EN 300 394-4-11 V1.1.1:2003 document contain?

The document contains the TSS for DMCC and MAC, the conventions for writing test purposes, and the full list of MS-REP2 DMO test purposes. It also includes MSC-based preambles and postambles that show how to move the IUT into and out of the required protocol states.

Clause 6 lays out the detailed test cases for CM, SDS, and MAC behavior, each with a reference, purpose, description, pass criteria, selection expression, and state setup. Annex A is an informative bibliography.

Buy Documents

Standard

SIST EN 300 394-4-11 V1.1.1:2003

English language (46 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

ANCE

Mexican certification and testing association.

EMA Mexico Verified

Intertek Slovenia

Intertek testing, inspection, and certification services in Slovenia.

UKAS Slovenia Verified

LNE (Laboratoire National de Métrologie et d'Essais)

French national laboratory for metrology and testing.

COFRAC France Verified

Sponsored listings

Frequently Asked Questions

SIST EN 300 394-4-11 V1.1.1:2003 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Terrestrial Trunked Radio (TETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 11: Test Suite Structure and Test Purposes (TSS&TP) for Mobile Station Repeater type 2". This standard covers: Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation

Protocol conformance testing (TTCN) for mobile stations to be used for Direct Mode operation

SIST EN 300 394-4-11 V1.1.1:2003 is classified under the following ICS (International Classification for Standards) categories: 33.070.10 - Terrestrial Trunked Radio (TETRA). The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 300 394-4-11 V1.1.1:2003 is associated with the following European legislation: Standardization Mandates: BC-T-344. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

SIST EN 300 394-4-11 V1.1.1:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Prizemni snopovni radio (TETRA) - Specifikacija za preskušanje skladnosti - 4. del: Specifikacija za preskušanje protokola za neposredno obratovanje (DMO) ¬- 11. poddel: Zgradba preskušalnega niza in nameni preskušanja (TSS&TP) za ponavljalnik (repetitor) tipa 2 mobilne postajeTerrestrial Trunked Radio (TETRA); Conformance testing specification; Part 4: Protocol testing specification for Direct Mode Operation (DMO); Sub-part 11: Test Suite Structure and Test Purposes (TSS&TP) for Mobile Station Repeater type 233.070.10Prizemni snopovni radio (TETRA)Terrestrial Trunked Radio (TETRA)ICS:Ta slovenski standard je istoveten z:EN 300 394-4-11 Version 1.1.1SIST EN 300 394-4-11 V1.1.1:2003en01-december-2003SIST EN 300 394-4-11 V1.1.1:2003SLOVENSKI
STANDARD
ETSIEN300394-4-11V1.1.1(2001-01)EuropeanStandard(Telecommunicationsseries)TerrestrialTrunkedRadio(TETRA);Conformancetestingspecification;Part4:ProtocoltestingspecificationforDirectModeOperation(DMO);Sub-part11:TestSuiteStructureandTestPurposes(TSS&TP)forMobileStationRepeatertype2SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)2ReferenceDEN/TETRA-02009-4-11KeywordsDMO,protocol,radio,testing,TETRA,TSS&TP,TTCNETSI650RoutedesLuciolesF-06921SophiaAntipolisCedex-FRANCETel.:+33492944200Fax:+33493654716SiretN°34862356200017-NAF742CAssociationàbutnonlucratifenregistréeàlaSous-PréfecturedeGrasse(06)N°7803/88ImportantnoticeIndividualcopiesofthepresentdocumentcanbedownloadedfrom:http://www.etsi.orgThepresentdocumentmaybemadeavailableinmorethanoneelectronicversionorinprint.Inanycaseofexistingorperceiveddifferenceincontentsbetweensuchversions,thereferenceversionisthePortableDocumentFormat(PDF).Incaseofdispute,thereferenceshallbetheprintingonETSIprintersofthePDFversionkeptonaspecificnetworkdrivewithinETSISecretariat.Usersofthepresentdocumentshouldbeawarethatthedocumentmaybesubjecttorevisionorchangeofstatus.InformationonthecurrentstatusofthisandotherETSIdocumentsisavailableathttp://www.etsi.org/tb/status/Ifyoufinderrorsinthepresentdocument,sendyourcommentto:editor@etsi.frCopyrightNotificationNopartmaybereproducedexceptasauthorizedbywrittenpermission.Thecopyrightandtheforegoingrestrictionextendtoreproductioninallmedia.©EuropeanTelecommunicationsStandardsInstitute2001.Allrightsreserved.SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)3ContentsIntellectualPropertyRights.5Foreword.51Scope.62References.63Definitionsandabbreviations.73.1TETRAdefinitions.73.2ISO/IEC9646abbreviations.73.3TETRAabbreviations.74TestSuiteStructure(TSS).84.1DMCClayertestgroups.84.2MAClayertestgroups.94.3Testgroupdescription.95IntroductiontoTestPurposes(TPs).105.1Testpurposedefinitionconventions.105.1.1TPsdescriptions.105.1.2Preambledescriptions.105.1.2.1Preambleidle_to_TX_occupation:FromIdlestatetoCallActiveTXOccupation.115.1.2.2Preambleidle_to_TX_reservation:FromIdlestatetoCallActiveTXReservation.135.1.2.3Preambleidle_to_RX_occupation:FromIdlestatetoCallActiveRXOccupation.155.1.2.4Preambleidle_to_RX_reservation.165.1.2.5Preambleidle_channel_occupation.175.1.3Postambledescriptions.185.1.3.1PostambleTX_occupation_to_idle:FromCallActiveTXOccupationstatetoIdle.185.1.3.2PostambleTX_reservation_to_idle:FromCallActiveTXReservedstatetoIdle.185.1.3.3PostambleRX_occupation_to_idle:FromCallActiveRXOccupationstatetoIdle.195.1.3.4PostambleRX_reservation_to_idle:FromCallActiveRXReservedstatetoIdle.195.2Testpurposenamingconventions.205.3Selectionexpressions.206DMOMS-REP2testpurposes.226.1DMCCCircuitMode(CM)tests.226.1.1MS-REP2CMcapabilitytests.226.1.2MS-REP2CMvalidbehaviourtests.236.1.2.1TheIUTisinidlestate,DMOchannelisfree.236.1.2.2IUTisinidlestate,DMOchannelisbusy.256.1.2.3IUTisinTXoccupationstate.256.1.2.4IUTisinRXoccupationstate.266.1.2.5IUTisinTXreservationstate.276.1.2.6IUTisinRXreservationstate.296.1.3MS-REP2CMtimertests.306.1.3.1DT303ResponsetoDM-SETUPPREStimer.306.1.3.2DT311Calltransactiontimer.306.2DMCCShortdataservice(SDS).316.2.1MS-REP2SDSCapabilitytests.316.2.2MS-REP2SDSValidbehaviourtests.316.2.2.1IUTisinidlestate,channelisfree.316.2.2.2IUTisinidlestate,channelisbusy.336.2.2.3IUTisinstateTXoccupation.336.2.2.4IUTisinRXoccupationstate.346.2.2.5IUTisinTXreservationstate.366.2.2.6IUTisinRXreservationstate.366.2.3MS-REP2SDSTimertests.376.2.3.1DT316ResponsetoDM-SDSDATAtimer.376.3DMOMS-REP2layer2:MAClayer.38SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)46.3.1MS-REP2MACcapabilitytests.386.3.2MS-REP2MACvalidbehaviourtests.386.3.2.1DMchannelusageprocedures.386.3.2.2Signallingmessagesprocedures.406.3.3MS-REP2MACtimertests.44AnnexA(informative):Bibliography.45History.46SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)5IntellectualPropertyRightsIPRsessentialorpotentiallyessentialtothepresentdocumentmayhavebeendeclaredtoETSI.TheinformationpertainingtotheseessentialIPRs,ifany,ispubliclyavailableforETSImembersandnon-members,andcanbefoundinETSISR000314:"IntellectualPropertyRights(IPRs);Essential,orpotentiallyEssential,IPRsnotifiedtoETSIinrespectofETSIstandards",whichisavailablefromtheETSISecretariat.LatestupdatesareavailableontheETSIWebserver(http://www.etsi.org/ipr).PursuanttotheETSIIPRPolicy,noinvestigation,includingIPRsearches,hasbeencarriedoutbyETSI.NoguaranteecanbegivenastotheexistenceofotherIPRsnotreferencedinETSISR000314(ortheupdatesontheETSIWebserver)whichare,ormaybe,ormaybecome,essentialtothepresentdocument.ForewordThisEuropeanStandard(Telecommunicationsseries)hasbeenproducedbyETSIProjectTerrestrialTrunkedRadio(TETRA).ThepresentdocumenthadbeensubmittedtoPublicEnquiryasETS300394-4-11.DuringtheprocessingforVoteitwasconvertedintoanEN.Thepresentdocumentispart4ofamulti-partdeliverablecoveringTerrestrialTrunkedRadio(TETRA);Conformancetestingspecification,asidentifiedbelow:Part1:"Radio";Part2:"ProtocoltestingspecificationforVoiceplusData(V+D)";Part3:"ProtocoltestingspecificationforPacketDataOptimized(PDO)";Part4:"ProtocoltestingspecificationforDirectModeOperation(DMO)";Part5:"Security".NationaltranspositiondatesDateofadoptionofthisEN:22December2000DateoflatestannouncementofthisEN(doa):31March2001DateoflatestpublicationofnewNationalStandardorendorsementofthisEN(dop/e):30September2001DateofwithdrawalofanyconflictingNationalStandard(dow):30September2001SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)61ScopeThepresentdocumentcontainstheTestSuiteStructure(TSS)andTestPurposes(TPs)totesttheTETRADirectModeOperation(DMO)protocols.Thepresentdocumentisdividedintoseveralparts,eachonedealingwithastackofprotocolswhichincludeslayer3andlayer2protocols.Thispresentpart4,sub-part11dealswithTSS&TPforaDirectModeMSoperatingwithatype2Repeater(MS-REP2)AirInterfaceprotocol,whilepart4,sub-part1dealswithTSS&TPforDMMStoMSprotocolandpart4,sub-part12dealswithtype2Repeater(DM-REP2)AirInterfaceprotocol.Testingofsecurityfeaturesisoutsidethescopeofthepresentdocument.TheobjectiveofthistestspecificationistoprovideabasisforapprovaltestsforTETRAequipmentgivingahighprobabilityofairinterfaceinter-operabilitybetweendifferentmanufacturer'sTETRAequipment.TheISO/IECstandardforthemethodologyofconformancetesting,ISO/IEC9646-1[2]andISO/IEC9646-2[3],aswellastheETSImethodologyforconformancetesting,ETS300406[4],areusedasthebasisforthetestmethodology.2ReferencesThefollowingdocumentscontainprovisionswhich,throughreferenceinthistext,constituteprovisionsofthepresentdocument.• Referencesareeitherspecific(identifiedbydateofpublication,editionnumber,versionnumber,etc.)ornon-specific.• Foraspecificreference,subsequentrevisionsdonotapply.• Foranon-specificreference,thelatestversionapplies.[1]ETSIEN300396-4:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part4:Type1repeaterairinterface".[2]ISO/IEC9646-1:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part1:Generalconcepts".[3]ISO/IEC9646-2:"Informationtechnology-OpenSystemsInterconnection-Conformancetestingmethodologyandframework-Part2:Abstracttestsuitespecification".[4]ETSIETS300406:"MethodsforTestingandSpecification(MTS);Protocolandprofileconformancetestingspecifications;Standardizationmethodology".[5]ETSIEN300396-7:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part7:Type2repeaterairinterface".[6]ETSIEN300396-8-4:"TerrestrialTrunkedRadio(TETRA);TechnicalrequirementsforDirectModeOperation(DMO);Part8:ProtocolImplementationConformanceStatement(PICS)proformaspecification;Sub-part4:Type2repeaterAirInterface(AI)".SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)73Definitionsandabbreviations3.1TETRAdefinitionsForthepurposesofthepresentdocument,thetermsanddefinitionsgiveninEN300396-7[5]apply.3.2ISO/IEC9646abbreviationsForthepurposesofthepresentdocument,thefollowingISO/IEC9646-1[2]abbreviationsapply:ICSImplementationConformanceStatementIUTImplementationUnderTestIXITImplementationeXtraInformationforTestingPDUProtocolDataUnitPICSProtocolImplementationConformanceStatementPIXITProtocolImplementationeXtraInformationforTestingTPTestPurposeTSSTestSuiteStructure3.3TETRAabbreviationsForthepurposesofthepresentdocument,thefollowingTETRAabbreviationsapply:CMCircuitModeDMCCDirectModeCallControlDMODirectModeofOperationFCSFrameCheckSequenceMACMediumAccessControlMNIMobileNetworkIdentityMSMobileStationRXReceiverSDSShortDataServicesSDUServiceDataUnitTXTransmitterSIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)84TestSuiteStructure(TSS)4.1DMCClayertestgroupsThefirstlevelseparatestheDMCClayer(orlayer3)indifferentprotocols(Circuitmode,ShortDataService).Nextlevelsplitsprotocoltestingintofunctionaltestgroupsaccordingtothetypeoftesting:Capabilitytest(CA),ValidBehaviour(BV)andTimertests(TI).Furtherlevelclassifiesthepossibleoperationsineachprotocolconditionorstate.ThefollowinglistdefinestheDMCClayertestgroupnamesandidentifiersusedforthose:-MS-REP2DirectModeCallControl(DMO_MSREP2_DMCC)-Circuitmode(CM)-Capabilitytests(CA)-ValidBehaviourtests(BV)-fromIdlestate(ID)-fromIdlestate,channelbusy(IB)-fromTXoccupationState(TXO)-fromRXoccupationState(RO)-fromTXReservation(TR)-fromRXReservationState(RR)-TimerTests(TI)-ShortDataService(SDS)-Capabilitytests(CA)-ValidBehaviourtests(BV)-fromIdlestate(ID)-fromIdlestate,channelbusy(IB)-fromRXoccupationState(RO)-fromTXReservation(TR)-fromRXReservationState(RR)-TimerTests(TI)SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)94.2MAClayertestgroupsThefirstleveloftheMACtestgroupsseparatestheMACtestsuiteinfunctionaltestgroups:CA,BVandTI.Thesecondlevelofthetestsubgroupsisadivisionofprotocolrequirementsintofunctionalentities.ThefollowinglistdefinestheMAClayertestgroupnamesandidentifiers:-MS-REP2MAClayer(DMO_MSREP2_MAC)-Capabilitytests(CA)-Validbehaviourtests(BV)-Channelusage(CU)-Signallingmessages(SM)-Trafficmode(TM)-Timertests(TI)4.3TestgroupdescriptionCapability(CA)testsprovidelimitedtestingthattheobservablecapabilitiesoftheIUTareinaccordancewiththeconformancerequirementsandtheadditionalcapabilitiesclaimedinthePICS/PIXIT.TheValidBehaviour(BV)grouptestsanIUTinresponsetovalidbehaviourofthetestsystem."Valid"meansthatatesteventissyntacticallyandcontextuallycorrect.Alltestcasesinthevalidbehaviourgroupareintendedtoverifyasthoroughlyaspossiblethevariousfunctionsoftheprotocol.Differenttimersaredefinedtosupervisethevariousstatetransitions.TheTimer(TI)testgroupisintendedtoverifythattheIUTisreactingproperlytoanexpiryofoneofthetimersortoacountermismatch.SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)105IntroductiontoTestPurposes(TPs)ThetestpurposesforDMCClayerandMAClayeraredefinedinclause6ofthepresentdocument.Eachlayerleadstoadifferenttestsuite.5.1Testpurposedefinitionconventions5.1.1TPsdescriptionsEachTPisdescribedusingtextpresentedinatable.Thetablecontainsthefollowinginformation:Table1TP-NameTheTPnameisauniqueidentifier,specifiedaccordingtotheTPnamingconventionsdefinedintheclausebelow.(itisalsothenameofthecorrespondingtestcase)Reference:referencetotheclausenumberofspecificationEN300396-7[5]statingthisconformancerequirement.Forexample:EN300396-7[5],6.2.5.1Purposepurposeofthetestitself,indicatingforexamplethetestperformedagainstarequirementoftheprotocol,describedbythistestpurpose.Example:testofchangeoverinitiatedfromRXreservationstateTestdescriptionbodyofthetestPasscriteriavisibleactiontobeobservedatPCOtodeclarethattheIUTpassesthetestandconformstothespecificationsSelectionexpressionbasedonEN300396-8-4[6]PICSstatements,usedtoselectordeselectthecorrespondingtestcaseaccordingtotheoptionsoftheimplementationPreamble"None"ornameofthepreambleprocedurebringingtheIUTfromidlestatetothestaterequiredtorunthetest.Forexample:idle_to_RX_reservationPostamble"None"ornameofthepostambletobringtheIUTbacktoidlestate,forexample:RX_occupation_to_idleThepreamblesandpostamblesaredescribedusingMSCsandareshowninthefollowingclauses.5.1.2PreambledescriptionsPreamblesareusedtobringtheIUTfromtheidlestatetothestatewherethetesttakesplace.Astheprotocolhasdifferentoptions,asforinstancetheuseofpresencecheckortheabsenceofpresencecheck,thereareseveralwaystoreachagivenstate.ThepreamblehastobechosenaccordingtotheIUTcapabilitiesandtheimplementedoptions.SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)115.1.2.1Preambleidle_to_TX_occupation:FromIdlestatetoCallActiveTXOccupationWithpresencecheck.IUTTesterIDLEDM_SETUP_PREDM_CONNECTDM_CONNECT_ACKTX_OCCUPATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateTX_OCCUPATIONwhenset-upwithpresencechecksupported*/Figure1SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)12Withoutpresencecheck.IUTTesterIDLEDM_SETUPTX_OCCUPATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateTX_OCCUPATIONwhenset-upwithoutpresencechecksupported*/Figure2SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)135.1.2.2Preambleidle_to_TX_reservation:FromIdlestatetoCallActiveTXReservationWithpresencecheck.IUTTesterIDLEDM_SETUP_PREDM_CONNECTDM_CONNECT_ACKDM_TX_CEASEDTX_RESERVATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateTX_RESERVATIONwhenset-upwithpresencecheckissupported*/Figure3SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)14Withoutpresencecheck.IUTTesterIDLEDM_SETUPDM_TX_CEASEDTX_RESERVATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateTX_RESERVATIONwhenset-upwithoutpresencechecksupported*/Figure4SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)155.1.2.3Preambleidle_to_RX_occupation:FromIdlestatetoCallActiveRXOccupationWithpresencecheck.IUTTesterIDLEDM_SETUP_PRESDM_CONNECTDM_CONNECT_ACKRX_OCCUPATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateRX_OCCUPATIONwhenset-upwithpresencechecksupported*/Figure5Withoutpresencecheck.IUTTesterIDLEDM_SETUPRX_OCCUPATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateRX_OCCUPATIONwhenset-upwithoutpresencecheckissupported*/Figure6SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)165.1.2.4Preambleidle_to_RX_reservationWithpresencecheck.IUTTesterIDLEDM_SETUP_PRESDM_CONNECTDM_CONNECT_ACKDM_TX_CEASEDRX_RESERVATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateRX_RESERVATIONwhenset-upwithpresencecheckissupported*/Figure7SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)17Withoutpresencecheck.IUTTesterIDLEDM_SETUPDM_TX_CEASEDRX_RESERVATION/*PREAMBLE:BringtheIUTfromstateIDLEtostateRX_RESERVATIONwhenset-upwithoutpresencechecksupported*/Figure85.1.2.5Preambleidle_channel_occupationWithoutpresencecheck.MS'TesterIUTIDLEDM_SETUP_PRESDM_CONNECTDM_CONNECT_ACK/*Channeloccupied*//*PREAMBLE:SetupthechanneltobeoccupiedwiththeTesterasthemasterofthechannelwhiletheIUTisstillinstateIDLE.*/Figure9SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)185.1.3PostambledescriptionsPostamblesareusedtobringtheIUTfromthestateendingthetest,totheidlestate.5.1.3.1PostambleTX_occupation_to_idle:FromCallActiveTXOccupationstatetoIdleIUTTesterTXOCCUPIEDDM_RELEASEIDLE/*POSTAMBLE:BringtheIUTfromstateTXOCCUPIEDtostateIDLEcausedbyaDMCC_RELEASE*/Figure105.1.3.2PostambleTX_reservation_to_idle:FromCallActiveTXReservedstatetoIdleIUTTesterTXRESERVEDDM_RELEASEIDLE/*POSTAMBLE:BringtheIUTfromstateTXRESERVEDtostateIDLEcausedbyaDMCC_RELEASE*/Figure11SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)195.1.3.3PostambleRX_occupation_to_idle:FromCallActiveRXOccupationstatetoIdleIUTTesterRXOCCUPATIONIDLE/*POSTAMBLE:BringtheIUTfromstateRXOCCUPATIONtostateIDLE*/Figure125.1.3.4PostambleRX_reservation_to_idle:FromCallActiveRXReservedstatetoIdleIUTTesterRXRESERVEDIDLE/*POSTAMBLE:BringtheIUTfromstateRXRESERVEDtostateIDLE*/Figure13SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)205.2TestpurposenamingconventionsTheidentifierofthetestpurposeisbuiltaccordingtotable2.Table2:TestpurposenamingconventionDMO//////=testsuitetypeMSREP2MS-Repeatertype2=functionalmoduleorDMCCDirectModeCallControl(layer3)subentity(layer3only)MACUpperMAC(layer2)=testgroupletterssuchas:abbreviationofthegroupname(optional)CMCircuitMode(layer3)SDSShortDataService(layer3)tt=TypeoftestingCACapabilityTestsBVValidBehaviourTestsBIInvalidBehaviourTestsTITimerexpiryandcountermismatchtests=testsubgrouptwoletterssubgroupname(optional)=sequentialnumber01-99TestPurposeNumber5.3SelectionexpressionsAtestcase,basedonatestpurposedescribedhere,canbeselectedordeselectedfromthetestsuite,accordingtotheevaluationofselectionexpressionswhichreflectthecapabilitiessupportedornotbytheimplementationundertest.Itappearsthatsomeselectionexpressionsarequitecomplex,mainlytheonesusedfortheMAClayertestsuite,astheyarebasedonaratherlongcombinationofPICSstatements.Toeasethereadabilityofthetestpurposes,thesecomplexselectionexpressionsarereplacedbygenericnameswhicharedefinedhere,andwhichrepresentbydefinitiontheselectionexpressionthemselves.SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)21Table3definesthegenericnamestogetherwiththeconditionsassociatedwitheachone.Table3SelectionexpressionidentifierSelectionexpressionusingreferencesto(EN300396-8-4[6])StaticcapabilitiesassociatedwiththisselectionInitiate_CM_callA.4/1ORA.5/1ORA.5/2InitiategroupCMcallorInitiateindividualCMcallwithoutpresencecheckorInitiateindividualCMcallwithpresencecheckInitiate_SDS_callA.9/1ORA.10/1ORA.10/2ORA.10/3SendgroupunacknowledgedSDSorSendindividualunacknowledgedSDSorSendacknowledgedSDSorSendingacknowledgedSDSwithdatainACKInitiate_CM_or_SDS_callA.4/1ORA.5/1ORA.5/2ORA.9/1ORA.10/1ORA.10/2ORA.10/3InitiategroupCMcallorInitiateindividualCMcallwithoutpresencecheckorInitiateindividualCMcallwithpresencecheckorSendgroupunacknowledgedSDSorSendindividualunacknowledgedSDSorSendacknowledgedSDSorSendacknowledgedSDSwithdatainACKReceive_Ackd_CM_or_SDS_callA.3/6ORA.12/2ORA.12/3AcceptCMcallsetupwithpresencecheck,ReceiveacknowledgedSDS,ReceiveacknowledgedSDSwithdatainACKSIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)226DMOMS-REP2testpurposes6.1DMCCCircuitMode(CM)testsTestgroupobjective:TotestthebehaviouroftheDMCCCMentityoftheIUT.Condition:IUTimplementstheCM.6.1.1MS-REP2CMcapabilitytestsTotestthebasiccapabilitiesoftheCMmoduleoftheIUT,whenoperatingingroupaddressmode(withoutpresencecheck)orinindividualaddressmode(withorwithoutpresencecheck).Handlingofasinglecall.DMO_MSREP2_DMCC_CM_CA_01Reference:EN300396-4[1],6.2.1.1,6.2.4.1PurposeSetupandterminateagroupcallwithoutpresencecheckTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetupPasscriteria1TheIUTsendsDM-SETUPtothetesterTestdescriptionThetestersendsanimplicitsendtotheIUTtoterminatethecallPasscriteria2TheIUTsendsDM-TXCEASEDtothetesterSelectionEN300396-8-4[6]A.4/1Setupprocedure,groupcalladdressPreambleNonePostambleTX_reservation_to_idleMSC035DMO_MSREP2_DMCC_CM_CA_02Reference:EN300396-4[1],6.2.2.1,6.2.4.1PurposeSetupandterminateanindividualcallwithpresencecheckTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.TheIUTsendsDM-SETUPPREStothetester.ThetestersendsDM-CONNECTtotheIUTPasscriteria1TheIUTsendsDM-CONNECTACKtothetesterTestdescriptionThetestersendsanimplicitsendtotheIUTtoterminatethecallPasscriteria2TheIUTsendsDM-TXCEASEDtothetesterSelectionEN300396-8-4[6]A.5/2SetupindividualcallwithpresencecheckPreambleNonePostambleTX_reservation_to_idleMSC037DMO_MSREP2_DMCC_CM_CA_03Reference:EN300396-4[1],6.2.1.1,6.2.4.1PurposeEstablishandterminateanindividualcall,whenoperatingwithoutpresencecheckTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetupPasscriteria1TheIUTsendsDM-SETUPtothetesterTestdescriptionThetestersendsanimplicitsendtotheIUTtoterminatethecallPasscriteria2TheIUTsendsDM-TXCEASEDtothetesterSelectionEN300396-8-4[6]A.5/1SetupindividualcallwithoutpresencecheckPreambleNonePostambleTX_reservation_to_idleMSC036SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)23Handlingofasecondsimultaneouscall.DMO_MSREP2_DMCC_CM_CA_04Reference:EN300396-7[5],6PurposeSetupasecondgroupcallwithoutpresencecheckTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.TheIUTsendsDM-SETUPtothetester.ThetestersendsasecondimplicitsendtotheIUTtocauseasecondcallsetupPasscriteriaCheckthattheIUTsendsasecondDM-SETUPtothetesterSelectionEN300396-8-4[6]A.4/1Setupprocedure,groupcalladdressPreambleNonePostambleTX_reservation_to_idleoneachcallDMO_MSREP2_DMCC_CM_CA_05Reference:EN300396-7[5],6PurposeSetupasecondindividualcallwithpresencecheckTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.TheIUTsendsDM-SETUPPREStothetester.ThetestersendsasecondimplicitsendtotheIUTtocauseasecondcallsetupPasscriteriaCheckthattheIUTsendsasecondDM-SETUPPREStothetesterSelectionEN300396-8-4[6]A.5/2SetupindividualcallwithpresencecheckPreambleNonePostambleTX_reservation_to_idleoneachcallDMO_MSREP2_DMCC_CM_CA_06Reference:EN300396-7[5],6PurposeEstablishasecondindividualcall,whenoperatingwithoutpresencecheckTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.TheIUTsendsDM-SETUPtothetester.ThetestersendsasecondimplicitsendtotheIUTtocauseasecondcallsetupPasscriteriaCheckthattheIUTsendsasecondDM-SETUPtothetesterSelectionEN300396-8-4[6]A.5/1SetupindividualcallwithoutpresencecheckPreambleNonePostambleTX_reservation_to_idleoneachcall6.1.2MS-REP2CMvalidbehaviourtests6.1.2.1TheIUTisinidlestate,DMOchannelisfreeDMO_MSREP2_DMCC_CM_BV_ID_01Reference:EN300396-4[1],6.2.2.1PurposeEstablishanoutgoingcallwithpresencecheckinitiatedfromidlestateandDMOchannelfreeTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.ThentheIUTsendsDM-SETUPPRESreceivedbythetester,whichsendsbackDM-CONNECTPasscriteriaTheIUTsendsDM-CONNECTACKPDUtothetesterSelectionEN300396-8-4[6]A.5/2SetupindividualcallwithpresencecheckPreambleNonePostambleTX_occupation_to_idleMSC037SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)24DMO_MSREP2_DMCC_CM_BV_ID_02Reference:EN300396-4[1],6.2.1.2PurposeReceiveanincomingcallwithoutpresencecheckTestdescriptionThetestersendsDM-SETUPPDUtotheIUTPasscriteriaTocheckthatIUTreaches"call_active_RX_occupation"state,thetestersendsDM-TXCEASEDwhichbringstheIUTto"call_active_RX_reservation".Duringthereservationperiod,whentheIUTattemptsacallsetup,itshallissueaDM-TXREQUESTtoinitiateachangeover,andthisisthepasscriteriaNOTE:Thiscallsetupiscontrolledbythetesterusinganimplicitsendcontaininga"DMCC_SETUP_request".SelectionEN300396-8-4[6]A.2/1CircuitmodecallPreambleNonePostambleTesterissuesaDM-REJECTfollowedbyRX_Reservation_to_idleMSC010DMO_MSREP2_DMCC_CM_BV_ID_03Reference:EN300396-4[1],6.2.2.2PurposeReceiveanincomingcallwithpresencecheckTestdescriptionThetestersendsDM-SETUPPREStotheIUTwhichsendsbackDM-CONNECT.ThetesterrespondswithDM-CONNECTACKPasscriteriaTocheckthatIUTreachesstate"call_active_RX_occupation"whenreceivingDM-CONNECTACK,thetestersendsDM-TXCEASEDwhichbringstheIUTto"call_active_RX_reservation".Duringthereservationperiod,whentheIUTattemptsacallsetup,itshallissueaDM-TXREQUESTtoinitiateachangeover,andthisisthepasscriteriaNOTE:Thiscallsetupiscontrolledbythetesterusinganimplicitsendcontaininga"DMCC_SETUP_request".SelectionEN300396-8-4[6]A.3/6AcceptcallsetupwithpresencecheckPreambleNonePostambleTesterissuesaDM-REJECTfollowedbyRX_Reservation_to_idleMSC009DMO_MSREP2_DMCC_CM_BV_ID_04Reference:EN300396-4[1],6.2.2.1PurposeReleaseacallsetupattemptwhenreceivingadisconnectTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.ThentheIUTsendsDM-SETUPPREStothetester.ThetestersendsDM-DISCONNECTtotheIUTtorejectthecallPasscriteriaTheIUTsendsDM-RELEASEtothetesterandreturnstoidleSelectionEN300396-8-4[6]A.5/2SetupindividualcallwithpresencecheckPreambleNonePostambleNoneMSC003DMO_MSREP2_DMCC_CM_BV_ID_05Reference:EN300396-4[1],6.2.2.1PurposeReleaseacallsetupattemptwhentheofferedQualityofServiceisnotacceptabletotheDMCCTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.ThentheIUTsendsDM-SETUPPREStothetester.ThetestersendsDM-CONNECTtotheIUTwithanunacceptableQOSPasscriteriaTheQOSbeingnotacceptable,theIUTsendsDM-RELEASEtothetesterandreturnstoidleSelectionEN300396-8-4[6]A.5/2SetupindividualcallwithpresencecheckPreambleNonePostambleNoneMSC002SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)25DMO_MSREP2_DMCC_CM_BV_ID_06Reference:EN300396-4[1],6.2.1.1,6.2.4.1,8.5.7.2.1PurposePre-emptionflagsinDM-SETUPandDM-TX-CEASEDPDUTestdescriptionThetestersendsanimplicitsendtocauseacallsetupPasscriteria1VerifythatIUTsendstheDM-SETUPPDUwiththepre-emptionflagsetto1TestdescriptionThetestersendsanimplicitsendtocausetheIUTtoterminatethecallPasscriteria2VerifythattheIUTsendstheDM-TXCEASEDPDUwiththerequestandchangeoverflagssetto1SelectionEN300396-8-4[6]A.5/2SetupindividualcallwithpresencecheckorORA.5/1SetupindividualcallwithoutpresencecheckPreambleNonePostambleNone6.1.2.2IUTisinidlestate,DMOchannelisbusyDMO_MSREP2_DMCC_CM_BV_IB_01Reference:EN300396-4[1],6.2.6PurposeInitiatecallpre-emption,toestablishanewCMcall,fromanMSnotinvolvedinthecurrentcallTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.Asthechannelisbusy,theIUTinitiallysendsaDM-PREEMPTtothetester,whichrespondsbysendingaDM-PREEMPT_ACCEPTPasscriteriaTheIUTsendsDM-SETUPorDM-SETUPPREStothetesteraccordingtotheIUTcapabilitySelectionEN300396-8-4[6]A3/13Initiatinganewcallbypre-emptionPreambleidle_channel_occupationPostambleNone(afterwaitingtimeoverT303andN303times)6.1.2.3IUTisinTXoccupationstateDMO_MSREP2_DMCC_CM_BV_TXO_01Reference:EN300396-4[1],6.2.4.1PurposeInitiatethereleaseofacallTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_RELEASE_request"totheIUTPasscriteriaTheIUTsendsDM-RELEASEtothetesterandreturnstoidle,stateobservablebythechannelbeingfreeSelectionEN300396-8-4[6]Initiate_CM_callPreambleIdle_to_TX_occupationPostambleNoneDMO_MSREP2_DMCC_CM_BV_TXO_02Reference:EN300396-4[1],6.2.4.1PurposeInitiateendoftransmission(TX-ceased)TestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_TX_CEASED_request"totheIUTPasscriteriaTheIUTsendsTXCEASEDtothetesterandmovestostateTXreservationSelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_occupationPostambleTX_reservation_to_idleMSC011SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)26DMO_MSREP2_DMCC_CM_BV_TXO_03Reference:EN300396-4[1],6.2.4.1PurposeReceivepre-emptionforanongoingindividualcallTestdescriptionThetestersendsaDM-PREEMPTtotheIUT,containingtheaddressofmasterPasscriteriaTheIUTsendsbackDM-PRE_ACCEPTandmovesto"call_active_RX_reservation".Duringthereservationperiod,whentheIUTattemptsacallsetup,itshallissueaDM-TXREQUESTtoinitiateachangeover,andthisisthepasscriteriaNOTE:Thiscallsetupiscontrolledbythetesterusinganimplicitsendcontaininga"DMCC_SETUP_request".SelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_occupationPostambleRX_Reservation_to_idleMSC034DMO_MSREP2_DMCC_CM_BV_TXO_04Reference:EN300396-4[1],6.2.4.1PurposeReceivepre-emptionforanewindividualcallTestdescriptionThetestersendsaDM-PREEMPTtotheIUT,containingtheaddressofanewpre-empterPasscriteriaTheIUTsendsbackDM-PRE_ACCEPTtothepre-empter,followedbyaDM-RELEASEtotheslaveandmovestoidle(observablebythechannelbeingfree)SelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_occupationPostambleNoneMSC038DMO_MSREP2_DMCC_CM_BV_TXO_05Reference:EN300396-4[1],6.2.4.1PurposeReceiveandrejectpre-emptionforanewindividualcallTestdescriptionThetestersendsaDM-PREEMPTtotheIUT,containinganunacceptablepriorityPasscriteriaTheIUTsendsbackDM-REJECTtothepre-empterSelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_occupationPostambleTX_occupation_to_idle6.1.2.4IUTisinRXoccupationstateTestthecapabilitytoinitiatereleaseofacallMSC028:notobservable,dropped.TestthecapabilitytoreceivereleaseofacallMSC03:notobservable,dropped.DMO_MSREP2_DMCC_CM_BV_RO_01Reference:EN300396-4[1],6.2.4.2PurposeReceivenormalendoftransmission(TXCease)TestdescriptionThetestersendsDM-TXCEASEDtotheIUTPasscriteriaTheIUTmovestostate"callactiveRXReservation".Duringthereservationperiod,whentheIUTattemptsacallsetup,itshallissueaDM-TXREQUESTtoinitiateachangeover,andthisisthepasscriteriaSelectionEN300396-8-4[6]A.2/1CircuitmodecallPreambleIdle_to_RX_occupationPostambleRX_Reservation_to_idleMSC030SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)27DMO_MSREP2_DMCC_CM_BV_RO_02Reference:EN300396-4[1],6.2.4.2PurposeInitiatepre-emptiontoestablishacall(eitherongoingornewcall)TestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_SETUP_request"totheIUT.TheIUTsendsDM-PREEMPT(address=master)tothetester,whichacceptsitbyansweringDM-PRE_ACCEPTPasscriteriaTheIUTsendsDM-SETUPorDM-SETUPPREStothetesteraccordingtotheIUTcapabilitySelectionEN300396-8-4[6]A.3/12Initiatepre-emptioninongoingcallPreambleIdle_to_RX_occupationPostambleInordertoclearthecallwithpresencecheck,thetestersendsaDM-DISCONNECTPDUandwaitsfortheDM-RELEASEPDU.Inordertoclearthecallwithoutpresencecheck,thepostambleTX_occupation_to_idleisusedMSC029MSC026DMO_MSREP2_DMCC_CM_BV_RO_03Reference:EN300396-4[1],6.2.4.2PurposeHandletherejectofapre-emptionTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_SETUP_request"totheIUT.TheIUTsendsDM-PREEMPT(address=master)tothetester,whichdoesnotacceptitandanswersDM-REJECTPasscriteriaTheIUTstaysinstate"call_active_RX_occupation"whenreceivingDM-REJECT.Tocheckit,thetestersendsDM-TXCEASEDwhichbringstheIUTto"call_active_RX_reservation".Duringthereservationperiod,whentheIUTattemptsacallsetup,itshallissueaDM-TXREQUESTtoinitiateachangeover,andthisisthepasscriteriaNOTE:Thiscallsetupiscontrolledbythetesterusinganimplicitsendcontaininga"DMCC_SETUP_request".SelectionEN300396-8-4[6]A.3/12Initiatepre-emptioninongoingcallPreambleIdle_to_RX_occupationPostambleTesterissuesaDM-REJECTfollowedbyRX_Occupation_to_idleMSC027DMO_MSREP2_DMCC_CM_BV_RO_04Reference:EN300396-4[1],6.2.4.2PurposeReceptionoftheongoingcallsetupTestdescriptionThetestersendsaDM-SETUPPRESPDUrelatedtotheongoingcallPasscriteriaVerifythattheIUTsendstheDM-CONNECTPDUSelectionEN300396-8-4[6]A.3/6Acceptcallset-upwithpresencecheckPreambleIdle_to_RX_occupationPostambleTestersendstheDM-CONNECTACKPDUandthenthepostambleTX_occupation_to_idleisusedtoclearthecall6.1.2.5IUTisinTXreservationstateDMO_MSREP2_DMCC_CM_BV_TR_01Reference:EN300396-4[1],6.2.5.1PurposeInitiatereleaseofacallTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_RELEASE_request"totheIUTPasscriteriaTheIUTsendsDM-RELEASEtothetesterSelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_reservationPostambleNoneMSC017SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)28DMO_MSREP2_DMCC_CM_BV_TR_02Reference:EN300396-4[1],6.2.5.1PurposeReceiveandacceptpre-emptionforanewcallTestdescriptionThetestersendsDM-PREEMPTtotheIUTforanewcallPasscriteriaTheIUTsendsDM-PRE_ACCEPTtothetesterSelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_reservationPostambleNoneMSC015DMO_MSREP2_DMCC_CM_BV_TR_03Reference:EN300396-4[1],6.2.5.1PurposeReceiveandacceptpre-emptionforcontinuationofongoingcallTestdescriptionThetestersendsDM-PREEMPTtotheIUTforacallcontinuationPasscriteriaTheIUTsendsDM-PRE_ACCEPTtothetesterSelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_reservationPostambleRX_reservation_to_idleMSC016DMO_MSREP2_DMCC_CM_BV_TR_04Reference:EN300396-4[1],6.2.5.1PurposeReceiveandacceptchangeoverTestdescriptionThetestersendsDM-TXREQUESTtotheIUTindicatingcallcontinuationPasscriteriaTheIUTsendsDM-TXACCEPTtothetesterSelectionEN300396-8-4[6]A.3/14CallchangeoverPreambleIdle_to_TX_reservationPostambleRX_Reservation_to_idleMSC012DMO_MSREP2_DMCC_CM_BV_TR_05Reference:EN300396-4[1],6.2.5.1PurposeEstablishCMcallTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_SETUP_request"totheIUTPasscriteriaTheIUTsendsDM-SETUPorDM-SETUPPREStothetesteraccordingtotheIUTcapabilitySelectionEN300396-8-4[6]A.3/3InitiatecallsetupwithorwithoutpresencecheckORA.3/4PreambleIdle_to_TX_reservationPostambleInordertoclearthecallwithpresencecheck,thetestersendsaDM-DISCONNECTPDUandwaitsfortheDM-RELEASEPDU.Inordertoclearthecallwithoutpresencecheck,thepostambleTX_occupation_to_idleisusedMSC013DMO_MSREP2_DMCC_CM_BV_TR_06Reference:EN300396-4[1],6.2.5.1PurposeReceiveincomingCMcallTestdescriptionThetestersendsDM-SETUPPREStotheIUTPasscriteriaTheIUTsendsDM-CONNECTPDUtothetester,asthesetuprequestwasacceptedbytheIUTSelectionEN300396-8-4[6]A.3/6AcceptcallsetupwithpresencecheckPreambleIdle_to_TX_reservationPostambleThetestersendstheDM-CONNECTACKPDUandthecallisclearedusingthepostambleRX_occupation_To_IdleMSC014SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)29DMO_MSREP2_DMCC_CM_BV_TR_07Reference:EN300396-4[1],6.2.5.1PurposeReceiveandrejectpre-emptionforanewcallTestdescriptionThetestersendsDM-PREEMPTcontaininganunacceptablepriorityleveltotheIUTindicatingnewcallPasscriteriaTheIUTsendsDM-REJECTPDUtothetesterandremainsinthesamestateSelectionEN300396-8-4[6]Initiate_CM_CallPreambleIdle_to_TX_reservationPostambleTX_reservation_to_idleDMO_MSREP2_DMCC_CM_BV_TR_08Reference:EN300396-4[1],6.2.5.1PurposeReceiveandrejectchangeoverTestdescriptionThetestersendsDM-TXREQUESTincludinganunacceptablepriorityleveltotheIUTindicatingcallcontinuationPasscriteriaTheIUTsendsDM-REJECTPDUtothetesterSelectionEN300396-8-4[6]A.3/15AcceptcallChangeoverPreambleIdle_to_TX_reservationPostambleTX_Reservation_to_idle6.1.2.6IUTisinRXreservationstateTestthecapabilitytoinitiatereleaseofagroupcallMSCA05:notvisible.Testthecapabilitytoreceiverelease,MSC046,notvisible.DMO_MSREP2_DMCC_CM_BV_RR_01Reference:EN300396-4[1],6.2.5.2PurposeReceiveincomingCMcallTestdescriptionThetestersendsDM-SETUPPREStotheIUTPasscriteriaTheIUTsendsDM-CONNECTtothetester,asthesetuprequestwasacceptedbytheIUTSelectionEN300396-8-4[6]A.3/6AcceptcallsetupwithpresencecheckPreambleIdle_to_RX_reservationPostambleRX_occupation_to_idleMSC045DMO_MSREP2_DMCC_CM_BV_RR_02Reference:EN300396-4[1],6.2.6PurposeInitiatepre-emptiontoestablishnewCMcallTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_SETUP_request"totheIUTPasscriteriaTheIUTsendsDM-PREEMPTtothetester,whichisacceptedbythetester(DM-PREACCEPTsentbackbythetester).ThentheIUTsendsDM-SETUPorDM-SETUPPREStothetesteraccordingtotheIUTcapabilitySelectionEN300396-8-4[6]A.3/13Initiateanewcallbypre-emptionPreambleIdle_to_RX_reservationPostambleInordertoclearthecallwithpresencecheck,thetestersendsaDM-DISCONNECTPDUandwaitsfortheDM-RELEASEPDU.Inordertoclearthecallwithoutpresencecheck,thepostambleTX_occupation_to_idleisusedMSCAx5SIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)30DMO_MSREP2_DMCC_CM_BV_RR_03Reference:EN300396-4[1],6.2.5.2PurposeInitiatechangeovertoestablishongoingCMcallTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_SETUP_request"totheIUTPasscriteriaTheIUTsendsDM-TXREQUESTtothetester,whichisacceptedbythetester(DM-TXACCEPTsentbackbythetester).ThentheIUTsendsbackDM-SETUPorDM-SETUPPREStothetesteraccordingtotheIUTcapabilitySelectionEN300396-8-4[6]A.3/14InitiateCallchangeoverPreambleIdle_to_RX_reservationPostambleInordertoclearthecallwithpresencecheck,thetestersendsaDM-DISCONNECTPDUandwaitsfortheDM-RELEASEPDU.Inordertoclearthecallwithoutpresencecheck,thepostambleTX_occupation_to_idleisusedMSC043orMSCAx4DMO_MSREP2_DMCC_CM_BV_RR_04Reference:EN300396-4[1],6.2.5.2PurposeHandletherejectofachangeoverrequestTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_SETUP_request"totheIUT.TheIUTsendsDM-TXREQUESTtothetester,whichisrejectedbythetester(DM-REJECTsentbackbythetester)PasscriteriaTheIUTremainsinthesamestate"callactiveRXreservation".Totestit,thetesterissuesagainanimplicitsendcontaininga"DMCC_SETUP_request"totheIUT.TheIUTsendsDM-TXREQUESTtothetesterSelectionEN300396-8-4[6]A.3/14InitiateCallchangeoverPreambleIdle_to_RX_reservationPostambleThetestersendsDM-DISCONNECTtoreturntheIUTtoidleMSC0476.1.3MS-REP2CMtimertests6.1.3.1DT303ResponsetoDM-SETUPPREStimerDMO_MSREP2_DMCC_CM_TI_01Reference:EN300396-4[1],6.2.2.1PurposeTimeoutDT303forresponsetoDMSETUPPRESTestdescriptionThetestersendsanimplicitsend(DMCC_SETUP_request)totheIUTtocauseacallsetup.ThentheIUTsendsDM-SETUPPREStothetester,ThetesterdoesnotanswerwithinDT303timePasscriteria(M)AfterDT303timeout,theIUTsendstheDM-RELEASEPDUortheDM-SETUPPRESPDUagaintothetesteruntilDN303orDN304attemptsaremadeSelectionEN300396-8-4[6]A.3/4InitiatecallsetupwithpresencecheckPreambleNonePostambleThetestersendsbackDM-DISCONNECTtorejectthecall6.1.3.2DT311CalltransactiontimerDMO_MSREP2_DMCC_CM_TI_02Reference:EN300396-4[1],6.2.4.1PurposeInitiateendoftransmissionaftertimeoutofDT311calltransactiontimerTestdescriptionAftertimeoutonDT311,theIUTsendsDM-TXCEASEDPDUandentersstateCallActiveTXReservationPasscriteriaTheDM-TXCEASEDPDUisreceivedbythetesterSelectionEN300396-8-4[6]Initiate_CM_callPreambleIdle_to_TX_occupationPostambleTX_reservation_to_idleSIST EN 300 394-4-11 V1.1.1:2003

ETSIETSIEN300394-4-11V1.1.1(2001-01)316.2DMCCShortdataservice(SDS)Testgroupobjective:TotestthebehaviouroftheDMCCSDSentityoftheIUT.Condition:IUTimplementsShortDataServiceandforsomeTPs,togetherwithCMcalls.6.2.1MS-REP2SDSCapabilitytestsTotestthebasiccapabilitiesoftheSDSmoduleoftheIUT,whenoperatinginunacknowledgedservice.DMO_MSREP2_DMCC_SDS_CA_01Reference:EN300396-4[1],6.3.1.1.1PurposeEstablishaSDSwithunacknowledgedserviceTestdescriptionThetesterissuesanimplicitsendcontaininga"DMCC_SDS_UNITDATArequest"totheIUTwhichselectstheappropriatedatatypesaccordingtotheIUTcapabilitiesPasscriteria(M)TheIUTsendsDM-SDS_UDATAtothetester,uptoDN314orDN317timesSelectionEN300396-8-4[6]A.9/1SendunacknowledgedSDS,grouporindividualaddressORA.10/1PreambleNonePostambleNoneMSC079HandlingofasecondsimultaneouscallDMO_MSREP2_DMCC_SDS_CA_02Reference:EN300396-4[1],6.3.1.1.1PurposeEstablishaSDScall,whileafirstcallisestablishedTestdescriptionThetestersendsanimplicitsendtotheIUTtocauseacallsetup.TheIUTsendsDM-SETUPtothetester,meaningthecallisestablishedinonechannel.Thenthetesteriss
...