SIST EN 13087-5:2012
(Main)Protective helmets - Test methods - Part 5: Retention system strength
Protective helmets - Test methods - Part 5: Retention system strength
This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard.
This European Standard specifies the method of test for retention system strength.
Schutzhelme - Prüfverfahren - Teil 5: Festigkeit des Haltesystems
Die Europäische Norm legt Prüfverfahren für Schutzhelme fest. Zweck dieser Prüfungen ist die Beurteilung der Gebrauchstauglichkeit des Helmes, wie es in der entsprechenden Norm für Helme festgelegt ist.
Diese Europäische Norm legt das Verfahren zur Prüfung der Festigkeit des Haltesystems fest.
Casques de protection - Méthodes d'essai - Partie 5: Résistance du système de rétention
La présente Norme européenne décrit des méthodes d'essai pour les casques de protection. Ces essais sont destinés à permettre l’évaluation de la performance du casque spécifiée dans la norme de casque appropriée.
La présente Norme européenne spécifie la méthode d'essai pour la résistance du système de rétention.
Varovalne čelade - Preskusne metode - 5. del: Čvrstost zadrževalnega sistema
Ta evropski standard določa preskusne metode za varovalne čelade. Namen teh preskusov je omogočiti oceno lastnosti čelade, kot je določeno v ustreznem standardu za čelado. Ta evropski standard določa preskusne metode za čvrstost zadrževalnega sistema.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzhelme - Prüfverfahren - Teil 5: Festigkeit des HaltesystemsCasques de protection - Méthodes d'essai - Partie 5: Résistance du système de rétentionProtective helmets - Test methods - Part 5: Retention system strength13.340.20Varovalna oprema za glavoHead protective equipmentICS:Ta slovenski standard je istoveten z:EN 13087-5:2012SIST EN 13087-5:2012en,fr,de01-julij-2012SIST EN 13087-5:2012SLOVENSKI
STANDARDSIST EN 13087-5:20011DGRPHãþD
SIST EN 13087-5:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13087-5
February 2012 ICS 13.340.20 Supersedes EN 13087-5:2000English Version
Protective helmets - Test methods - Part 5: Retention system strength
Casques de protection - Méthodes d'essai - Partie 5: Résistance du système de rétention
Schutzhelme - Prüfverfahren - Teil 5: Festigkeit des Haltesystems This European Standard was approved by CEN on 17 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13087-5:2012: ESIST EN 13087-5:2012
EN 13087-5:2012 (E) 2 Contents Page Foreword .3Introduction .41Scope .52Normative references .53Terms and definitions .54Prerequisites .55Methods .55.1General .55.2Headform support, increasing load method .65.2.1Principle .65.2.2Apparatus .65.2.3Procedure .75.2.4Test report .75.3Hook support, dynamic load method .75.3.1Principle .75.3.2Apparatus .75.3.3Procedure .85.3.4Test report .95.4Headform support, dynamic load method .95.4.1Principle .95.4.2Apparatus .95.4.3Procedure . 105.4.4Test report . 10Annex A (normative)
Test results – Uncertainty of measurement . 15Annex B (informative)
Significant technical changes between this European Standard and EN 13087-5:2000. 16Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC Personal Protective Equipment . 17 SIST EN 13087-5:2012
EN 13087-5:2012 (E) 3 Foreword This document (EN 13087-5:2012) has been prepared by Technical Committee CEN/TC 158 “Head protection”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2012, and conflicting national standards shall be withdrawn at the latest by August 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13087-5:2000. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. Annex B provides details of significant technical changes between this European Standard and the previous edition. This European Standard consists of the following ten parts: Part 1 : Conditions and conditioning; Part 2 : Shock absorption; Part 3 : Resistance to penetration; Part 4 : Retention system effectiveness; Part 5 : Retention system strength; Part 6 : Field of vision; Part 7 : Flame resistance; Part 8 : Electrical properties; Part 9 : Mechanical rigidity1; Part 10 : Resistance to radiant heat. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
1 To be published. SIST EN 13087-5:2012
EN 13087-5:2012 (E) 4 Introduction This European Standard is intended as a supplement to the specific product standards for protective helmets (helmet standards). This method or other test methods may be applicable to specified for complete helmets or parts thereof, and may be referenced in the appropriate helmet standards. Performance requirements are given in the appropriate helmet standard, as are such prerequisites as the number of samples, preconditioning, preparation of samples for the tests, sequence and duration of testing and assessment of test results. If deviations from the test method given in this standard are necessary, these deviations will be specified in the appropriate helmet standard.
SIST EN 13087-5:2012
EN 13087-5:2012 (E) 5 1 Scope This European Standard specifies methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard. This European Standard specifies the method of test for retention system strength. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 960:2006, Headforms for use in the testing of protective helmets EN 13087-1, Protective helmets — Test methods — Part 1: Conditions and conditioning 3 Terms and definitions For the purposes of this document, terms and definitions given in this standard may be found in the appropriate helmet standard. 4 Prerequisites In order to implement this part of EN 13087, at least the following parameters shall be specified in the appropriate helmet standard: a) performance requirements; b) number of samples; c) preparation of samples; d) sequence of conditioning; e) sequence of tests; f) method of test - 5.2 (including 5.2.3.1 or 5.2.3.2), 5.3 or 5.4, and the initial and intermediate forces; g) sizes of the headforms; h) impact energy, including tolerance, of the falling mass - methods 5.3 and 5.4; i) fitting instructions. 5 Methods 5.1 General Testing shall be performed in ambient conditions specified in EN 13087-1. Three test methods are specified. The method to be used is specified in the helmet standard. SIST EN 13087-5:2012
EN 13087-5:2012 (E) 6 5.2 Headform support, increasing load method 5.2.1 Principle The helmet is supported on a headform and a specified, varying force is applied to the retention system via an artificial jaw. In method (a) (see 5.2.3.1) the ultimate tensile strength of the system alone is measured. In method (b) (see 5.2.3.2) the elongation of the system is measured as well. 5.2.2 Apparatus 5.2.2.1 General The apparatus shall include: a series of headforms; a rigid structure to support the headforms; an artificial jaw; a means of applying a variable tensile force to the artificial jaw; a means to measure the displacement of the artificial jaw. An arrangement of a suitable apparatus is shown in Figure 1. 5.2.2.2 Test headforms Headforms, conforming to EN 960:2006, 2.2, 3.1.2 and 3.2. The sizes to be used are specified in the helmet standard, but shall be selected from size designations 495, 535, 575, 605 and 625 (equivalent to codes A, E, J, M and O, respectively, EN 960:1994). 5.2.2.3 Rigid structure Rigid structure, capable of supporting the headform so that it does not move during the test. 5.2.2.4 Artificial jaw Artificial jaw, comprising two rigid cylindrical rollers of diameter (12,5 ± 0,5) mm, with their longitudinal axes separated by (75 ± 2) mm. 5.2.2.5 Means of applying a known variable force to the artificial jaw Any suitable means may be used. 5.2.2.6 Means to meas
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.