SIST EN 60335-2-67:2003/A1:2007
(Amendment)Household and similar electrical appliances - Safety -- Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use
Household and similar electrical appliances - Safety -- Part 2-67: Particular requirements for floor treatment and floor cleaning machines, for industrial and commercial use
corrigendum to EN issued December 2006
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke -- Teil 2-67: Besondere Anforderungen für Bodenbehandlungs- und Bodenreinigungsmaschinen für industrielle und gewerbliche Zwecke
Appareils électrodomestiques et analogues - Sécurité -- Partie 2-67: Règles particulières pour les machines de traitement et de nettoyage des sols à usage industriel et commercial
Gospodinjski in podobni električni aparati - Varnost - 2-67. del: Posebne zahteve za industrijske in komercialne stroje za nego in čiščenje tal (IEC 60335-2-67:2002/A1:2005)
General Information
Relations
Standards Content (Sample)
6/29(16., 6,67(1
$
67$1'$5'
MDQXDU
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO 3RVHEQH
]DKWHYH]DLQGXVWULMVNHLQNRPHUFLDOQHVWURMH]DQHJRLQþLãþHQMHWDO ,(&
$
LVWRYHWHQ(1 $
+RXVHKROGDQGVLPLODUHOHFWULFDODSSOLDQFHV6DIHW\3DUW 3DUWLFXODU
UHTXLUHPHQWVIRUIORRUWUHDWPHQWDQGIORRUFOHDQLQJPDFKLQHVIRULQGXVWULDODQG
FRPPHUFLDOXVH ,(& $
,&6 5HIHUHQþQDãWHYLOND
6,67(1 $ HQ
!"#$%&’( )&!*+,%- .
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 60335-2-67/A1
NORME EUROPÉENNE
March 2006
EUROPÄISCHE NORM
ICS 23.080; 91.140.65 Incorporates Corrigendum December 2006
English version
Household and similar electrical appliances -
Safety
Part 2-67: Particular requirements for floor treatment
and floor cleaning machines,
for industrial and commercial use
(IEC 60335-2-67:2002/A1:2005)
Appareils électrodomestiques Sicherheit elektrischer Geräte für den
et analogues - Hausgebrauch und ähnliche Zwecke
Sécurité Teil 2-67: Besondere Anforderungen
Partie 2-67: Règles particulières für Bodenbehandlungs- und
pour les machines de traitement Bodenreinigungsmaschinen
et de nettoyage des sols für industrielle und gewerbliche Zwecke
à usage industriel et commercial (IEC 60335-2-67:2002/A1:2005)
(CEI 60335-2-67:2002/A1:2005)
This amendment A1 modifies the European Standard EN 60335-2-67:2003; it was approved by CENELEC
on 2005-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60335-2-67:2003/A1:2006 E
---------------------- Page: 2 ----------------------
EN 60335-2-67:2003/A1:2006 - 2 -
Foreword
The text of document 61J/196/FDIS, future amendment 1 to IEC 60335-2-67:2002, prepared by SC 61J,
Electrical motor-operated cleaning appliances for industrial use, of IEC Technical Committee 61, Safety of
household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as amendment A1 to EN 60335-2-67:2003 on 2005-12-01.
The following dates are applicable:
- latest date by which the amendment has to be
implemented at national level by publication of
an identical national standard or by endorsement (dop) 2006-10-01
- date on which national standards conflicting
with the amendment have to be withdrawn (dow) 2008-12-01
This amendment supplements or modifies the corresponding clauses of EN 60335-2-67:2003.
As a consequence of endorsing amendment 1:2005 to IEC 60335-2-67:2002, the common modifications
in EN 60335-2-67:2003 are replaced by IEC text and therefore withdrawn.
There are no special national conditions causing a deviation from this amendment.
There are no national deviations from this amendment.
The contents of the corrigendum of December 2006 have been included in this copy.
____________
Endorsement notice
The text of amendment 1:2005 to the International Standard IEC 60335-2-67:2002 was approved by
CENELEC as an amendment to the European Standard without any modification.
____________
p Add:
Annex ZC
(normative)
Normative references to international publications
with their corresponding European publications
Addition:
Publication Year Title EN/HD Year
1)
ISO 6344-2 – Coated abrasives - Grain size analysis – –
Part 2: Determination of grain size distribution
of macrogrits P12 to P220
___________
1)
Undated reference.
---------------------- Page: 3 ----------------------
INTERNATIONAL IEC
STANDARD 60335-2-67
2002
AMENDMENT 1
2005-09
Amendment 1
Household and similar electrical appliances –
Safety –
Part 2-67:
Particular requirements for floor treatment
and floor cleaning machines, for industrial
and commercial use
IEC 2005 Droits de reproduction réservés Copyright - all rights reserved
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale K
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
For price, see current catalogue
---------------------- Page: 4 ----------------------
– 2 – 60335-2-67 Amend. 1 IEC:2005(E)
FOREWORD
This amendment has been prepared by subcommittee 61J: Electrical motor-operated cleaning
appliances for industrial use, of IEC technical committee 61: Safety of household and similar
electrical appliances.
The text of this amendment is based on the following documents:
FDIS Report on voting
61J/196/FDIS 61J/209/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the maintenance result date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
_____________
FOREWORD
Add the following item to the list of differences existing in some countries:
– Clause 7.12 No requirements for sound and vibration markings exist (USA)
INTRODUCTION
Replace the second sentence of the second paragraph by the following:
It also covers abnormal situations that can be expected in practice and takes into account the
way in which electromagnetic phenomena can affect the safe operation of appliances.
2 Normative references
Add the following reference:
ISO 6344-2, Coated abrasives – Grain size analysis – Part 2: Determination of grain size
distribution of macrogrits P12 to P220
---------------------- Page: 5 ----------------------
60335-2-67 Amend. 1 IEC:2005(E) – 3 –
3 Definitions
st
3.1.9 Add, after the 1 paragraph, the following paragraph:
Power outlets for accessories are loaded with a resistive load in accordance with the marking.
Add the following new definitions:
3.101
water-suction cleaning appliance
appliance for aspirating an aqueous solution that may contain foaming detergent
3.102
motorized cleaning head
accessory containing a motor that is supplied from the appliance and which is attached to the
end of a hand-held hose or tube
NOTE The main cleaning head permanently attached is not regarded as a motorized cleaning head.
7 Marking and instructions
Add the following subclause:
7.6 Addition:
[symbol IEC 60417-5935 (DB:2002-10)] motorized cleaning head for water-
suction cleaning
7.12 Replace the existing text by the following:
Addition:
The front cover of the instruction manual shall include the substance of the following:
CAUTION: Read the instruction manual before using the appliance.
This wording may be replaced by symbols 0434 and 1641 of ISO 7000. If these symbols are
used, their meaning is to be explained in the instructions for use.
The instruction manual shall include the substance of the following warnings, as applicable.
– CAUTION: This appliance is not suitable for picking up hazardous dust.
– CAUTION: This appliance is for dry use only and is not to be used or stored outdoors in
wet conditions.
– WARNING: Only use the brushes provided with the appliance or those specified in the
instruction manual. The use of other brushes may impair safety.
The instruction manual shall give details regarding the following, as applicable:
– the precautions to be taken when using the appliance under specific conditions such as
handling flammable liquids or dust, and dust hazardous to health;
---------------------- Page: 6 ----------------------
– 4 – 60335-2-67 Amend. 1 IEC:2005(E)
– a statement that the appliance is to be disconnected from its power source during cleaning
or maintenance and when replacing parts or converting the appliance to another function:
• for mains operated appliances, the plug is to be removed from the socket-outlet;
• for battery operated appliances, the key of the supply switch is to be removed or an
equivalent disconnection is to be made;
– a statement that doors and covers are to be positioned as indicated in the instruction
manual before using the appliance;
– the precautions to be taken when changing brushes or other attachments which require
the appliance to be energized;
– the intended use of brushes which are specified for the appliance;
– a warning that large diameter brushes provided specifically for dry buffing are not intended
for general polishing.
The instruction manual shall state
– the A-weighted sound pressure level L in dB(A) emitted by the appliance. If the
PA
A-weighted sound pressure level exceeds 85 dB(A), it shall also state the sound power
level L in dB(A) and that appropriate ear protection has to be used.
WA
NOTE 101 The sound level is measured in accordance with IEC 60704-1.
– the weighted r.m.s. acceleration value to which the operators’ arms are subjected in m/s²,
separately for each arm (if applicable).
NOTE 102 The weighted r.m.s. acceleration value is measured in accordance with ISO 5349 for arm
vibrations, the appliance being supplied at rated voltage or at the maximum rated voltage for machine with a
range of voltages
The instruction manual shall include the substance of the following:
This appliance is suitable for commercial use, for example in hotels, schools, hospitals,
factories, shops, offices and rental businesses.
The instruction manual for mains operated appliances shall include the substance of the
following:
– do not allow the rotating brushes to come into contact with the supply cord;
– regularly examine the supply cord for damage, such as cracking or ageing. If damage is
found, replace the cord before further use;
– only replace the supply cord with the type specified in the instruction manual;
– only use the socket outlet on the appliance for purposes specified in the instruction
manual.
The instructions for appliances having a current-carrying hose operating at other than safety
extra-low voltage shall include the substance of the following:
CAUTION: This hose contains electrical connections:
– do not use to collect water;
– do not immerse in water for cleaning;
– the hose should be check
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.