iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ISO 3207:1996/ADD1:1996

(Addendum)

Statistical interpretation of data - Determination of a statistical tolerance interval - Addendum 1-1978

Statistical interpretation of data - Determination of a statistical tolerance interval - Addendum 1-1978

Interprétation statistique des données — Détermination d'un intervalle statistique de dispersion — Additif 1

Statistical interpretation of data - Determination of a statistical tolerance interval - Addendum 1-1978

General Information

Status
Withdrawn
Publication Date
31-Aug-1996
Withdrawal Date
31-Dec-2005
ICS
03.120.30 - Application of statistical methods
Technical Committee
ISTM - Statistical methods
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Jan-2006
Due Date
01-Jan-2006
Completion Date
01-Jan-2006
Ref Project
ISO 3207:1975/Add 1:1978 - Statistical interpretation of data — Determination of a statistical tolerance interval — Addendum 1

Relations

Child
ISO 3207:1975 - Statistical interpretation of data — Determination of a statistical tolerance interval
Effective Date
14-Aug-2008
Child
SIST ISO 3207:1996 - Statistical interpretation of data -- Determination of a statistical tolerance interval
Effective Date
12-May-2008
Amends
SIST ISO 3207:1996 - Statistical interpretation of data -- Determination of a statistical tolerance interval
Effective Date
06-Jun-2022

Buy Standard

ISO 3207:1975/Add 1:1978ISO 3207:1975/Add 1:1978
PreviousNext
Standard
ISO 3207:1975/Add 1:1978
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3207:1975/Add 1:1978ISO 3207:1975/Add 1:1978
PreviousNext
Standard
ISO 3207:1975/Add 1:1978
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3207:1975/Add 1:1978ISO 3207:1975/Add 1:1978
PreviousNext
Standard
ISO 3207:1975/Add 1:1978
French language
3 pages
sale 15% off
Preview
sale 15% off
Preview
ISO 3207:1996/ADD1:1996ISO 3207:1996/ADD1:1996
PreviousNext
Addendum
ISO 3207:1996/ADD1:1996
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL STANDARD ISO 32074975/ADDENDUM 1
Publ ished 1978-06-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEX’I(YHAPOAHAR OPf-AHM3AUMX I-T0 CTAHAAPTM3AL@iki *ORGANISATION INTERNATIONALE DE NORMALISATION
Statistical interpretation of data - Determination of a statistical tolerante interval
ADDENDUM 1
Addendum 1 to International Standard ISO 3207 was developed by Technical Committee ISO/TC 69, Applications of stat-
istical methods, and was circulated to the member bodies in September 1976.
It has been approved by the member bodies of the following countries :
Austria Hungary Spain
Belgium Israel Switzerland
Brazil I taly Turkey
Canada Mexico United Kingdom
Chile Netherlands U.S.A.
Poland
Czechoslovakia U.S.S. R.
France Romania
South Africa, Rep. of
Germany
No member body expressed disapproval of the document.
The nomographs 1
...

NORME INTERNATIONALE ISO 32074975/ADDITIF 1
Publié 1978-06-l 5
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXLItYHAPOflHAII OPTAHM3AUMR I-I0 CTAHAAPTM3ALWlM .ORGANISATION INTERNATIONALE DE NORMALISATION
Détermination d’un intervalle statistique de dispersion
Interprétation statistique des données -
ADDITIF 1
L’Additif 1 à la Norme internationale ISO 3207 a été élaboré par le comité technique ISO/TC 69, Application des méthodes
statistiques, et a été soumis aux comités membres en septembre 1976.
Les comités membres des pays suivants l’ont approuvé :
Royaume-Uni
Afrique du Sud, Rép. d’ France
Allemagne Hongrie Suisse
Autriche Israël Tchécoslovaquie
Belgique Italie Turquie
Brésil Mexique U.R.S.S.
Canada Pays-Bas U.S.A.
Chili Pologne
Espagne Roumanie
Auc
...

NORME INTERNATIONALE ISO 32074975/ADDITIF 1
Publié 1978-06-l 5
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXLItYHAPOflHAII OPTAHM3AUMR I-I0 CTAHAAPTM3ALWlM .ORGANISATION INTERNATIONALE DE NORMALISATION
Détermination d’un intervalle statistique de dispersion
Interprétation statistique des données -
ADDITIF 1
L’Additif 1 à la Norme internationale ISO 3207 a été élaboré par le comité technique ISO/TC 69, Application des méthodes
statistiques, et a été soumis aux comités membres en septembre 1976.
Les comités membres des pays suivants l’ont approuvé :
Royaume-Uni
Afrique du Sud, Rép. d’ France
Allemagne Hongrie Suisse
Autriche Israël Tchécoslovaquie
Belgique Italie Turquie
Brésil Mexique U.R.S.S.
Canada Pays-Bas U.S.A.
Chili Pologne
Espagne Roumanie
Auc
...

SLOVENSKI STANDARD
SIST ISO 3207:1996/ADD1:1996
01-september-1996
Statistical interpretation of data - Determination of a statistical tolerance interval -
Addendum 1-1978
Statistical interpretation of data - Determination of a statistical tolerance interval -
Addendum 1-1978
Ta slovenski standard je istoveten z: ISO 3207:1975/Add 1:1978
ICS:
03.120.30 8SRUDEDVWDWLVWLþQLKPHWRG Application of statistical
methods
SIST ISO 3207:1996/ADD1:1996 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 3207:1996/ADD1:1996

---------------------- Page: 2 ----------------------

SIST ISO 3207:1996/ADD1:1996
INTERNATIONAL STANDARD ISO 32074975/ADDENDUM 1
Publ ished 1978-06-15
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION .MEX’I(YHAPOAHAR OPf-AHM3AUMX I-T0 CTAHAAPTM3AL@iki *ORGANISATION INTERNATIONALE DE NORMALISATION
Statistical interpretation of data - Determination of a statistical tolerante interval
ADDENDUM 1
Addendum 1 to International Standard ISO 3207 was developed by Technical Committee ISO/TC 69, Applications of stat-
istical methods, and was circulated to the member bodies in September 1976.
It has been approved by the member
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST ISO 13528:2023(Main)
Statistical methods for use in proficiency testing by interlaboratory comparison
ISO 13528:2022

This document provides detailed descriptions of statistical methods for proficiency testing providers to use to design proficiency testing schemes and to analyse the data obtained from those schemes. This document provides recommendations on the interpretation of proficiency testing data by participants in such proficiency testing schemes and by accreditation bodies.
The procedures in this document can be applied to demonstrate that the measurement results obtained by laboratories, inspection bodies, and individuals meet specified criteria for acceptable performance.
This document is applicable to proficiency testing where the results reported are either quantitative measurements or qualitative observations on test items.
NOTE The procedures in this document can also be applied for the assessment of expert opinion where the opinions or judgments are reported in a form which can be compared objectively with an independent reference value or a consensus statistic. For example, when classifying proficiency test items into known categories by inspection - or in determining by inspection whether proficiency test items arise, or do not arise, from the same original source - and the classification results are compared objectively, the provisions of this document that relate to nominal (qualitative) properties can be applied.

  • Standard
    100 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    93 pages
    English language
    sale 15% off
  • Standard
    100 pages
    French language
    sale 15% off
SIST
SIST ISO 3951-1:2023(Main)
Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL
ISO 3951-1:2022

This document specifies single sampling plans for lot-by-lot inspection under the following conditions:
a) where the inspection procedure is applied to a continuing series of lots of discrete products, all supplied by one producer using one production process;
b) where only a single quality characteristic, x, of these products is taken into consideration, which is measurable on a continuous scale;
c) where production is under statistical control and the quality characteristic, x, is distributed according to a normal distribution or a close approximation to the normal distribution;
d) where a contract or standard defines a lower specification limit, L, an upper specification limit, U, or both. An item is qualified as conforming if its measured quality characteristic, x, satisfies as appropriate one of the following inequalities:
1) x ≥ L (i.e. the lower specification limit is not violated);
2) x ≤ U (i.e. the upper specification limit is not violated);
3) x ≥ L and x ≤ U (i.e. neither the lower nor the upper specification limit is violated).
Inequalities 1) and 2) are cases with a single specification limit, and 3) is a case with double specification limits.
Where double specification limits apply, it is assumed in this document that conformity to both specification limits is equally important to the integrity of the product. In such cases, it is appropriate to apply a single AQL to the combined percentage of a product outside the two specification limits. This is referred to as combined control.

  • Standard
    114 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    107 pages
    English language
    sale 15% off
  • Standard
    110 pages
    French language
    sale 15% off
SIST
SIST ISO 2859-4:2021(Main)
Sampling procedures for inspection by attributes - Part 4: Procedures for assessment of declared quality levels
ISO 2859-4:2020

This document establishes single sampling plans for conformance testing, i.e., for assessing whether the quality level of a relevant audit population (lot, process, inventory, file etc) conforms to a declared value. Sampling plans are provided corresponding to four levels of discriminatory ability. The limiting quality ratio (LQR) (see Clause 4) of each sampling plan is given for reference. For levels I-III, the sampling plans have been devised so as to obtain a risk no more than 5 % of contradicting a correct declared quality level. The risk of failing to contradict an incorrectly declared quality level which is related to the LQR is no more than 10 %. The sample sizes for level 0 are designed in a way that the LQR factors of the sampling plans are compatible with the LQR factors for level I.
In contrast to the procedures in the other parts of the ISO 2859 series, the procedures in this document are not applicable to acceptance assessment of lots. Generally, this document mainly focuses on controlling type I error, which differs from the balancing of the risks in the procedures for acceptance sampling.
This document can be used for various forms of quality inspection in situations where objective evidence of conformity to some declared quality level is to be provided by means of inspection of a sample. The procedures are applicable to entities such as lots, process output, etc. that allow random samples of individual items to be taken from the entity.
The sampling plans provided in this document are applicable, but not limited, to the inspection of a variety of targets such as:
— end items;
— components and raw materials;
— operations;
— materials in process;
— supplies in storage;
— maintenance operations;
— data or records;
— administrative procedures;
— accounting procedures or accounting entries;
— internal control procedures.
This document considers two types of quality models for discrete items and populations, as follows.
i) The conforming-nonconforming model, where each item is classified as conforming or nonconforming, and where the quality indicator of a population of items is the proportion p of nonconforming items, or, equivalently, the percentage 100 p of nonconforming items.
ii) The nonconformities model, where the number of nonconformities is counted on each item, and where the quality indicator of a population of items is the average number λ of nonconformities found on items in the population, or, equivalently, the percentage 100 λ of nonconformities on items in the population.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    19 pages
    French language
    sale 15% off
  • Draft
    18 pages
    English language
    sale 15% off
SIST
SIST ISO 22514-3:2021(Main)
Statistical methods in process management - Capability and performance - Part 3: Machine performance studies for measured data on discrete parts
ISO 22514-3:2020

This document describes the steps for conducting short-term performance studies that are typically performed on machines (including devices, appliances, apparatuses) where parts produced consecutively under repeatability conditions are considered. The number of observations to be analysed vary according to the patterns the data produce, or if the runs (the rate at which items are produced) on the machine are low in quantity. The methods are not considered suitable where the sample size produced is less than 30 observations. Methods for handling the data and carrying out the calculations are described. In addition, machine performance indices and the actions required at the conclusion of a machine performance study are described.
This document is not applicable when tool wear patterns are expected to be present during the duration of the study, nor if autocorrelation between observations is present. The situation where a machine has captured the data, sometimes thousands of data points collected in a minute, is not considered suitable for the application of this document.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    19 pages
    English language
    sale 15% off
  • Draft
    19 pages
    English language
    sale 15% off
  • Draft
    17 pages
    English language
    sale 15% off
SIST
SIST ISO 2859-2:2020
Sampling procedures for inspection by attributes - Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
ISO 2859-2:2020

This document specifies an acceptance sampling system for inspection by attributes indexed by limiting quality (LQ). The sampling system is used for lots in isolation (isolated sequences of lots, an isolated lot, a unique lot or a short series of lots), where switching rules, such as those of ISO 2859‑1, are not applicable. Inspection levels, as provided by ISO 2859‑1 to control the relative amount of inspection, are not provided in this document. In many industrial situations, in which switching rules might be used, they are not applied for a number of reasons, not all of which might be valid:
a) production is intermittent (not continuous);
b) production is from several different sources in varying quantities, i.e. "job lots";
c) lots are isolated;
d) lots are resubmitted after inspection.
The sampling plans in this document are indexed by a series of specified values of limiting quality (LQ), where the consumer's risk (the probability of acceptance at the LQ) is usually below 0,10 (10 %), except in some instances.
This document is intended both for inspection for nonconforming items and for inspection for nonconformities per 100 items.
It is intended to be used when the supplier and the consumer both regard the lot to be in isolation. That is, the lot is unique in that it is the only one of its type produced. It can also be used when there is a series of lots too short for switching rules to be applied.

  • Standard
    50 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    46 pages
    English language
    sale 15% off
  • Standard
    46 pages
    French language
    sale 15% off
SIST
SIST ISO 2859-1:2003/Amd 1:2020(Amendment)
Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection - AMENDMENT 1
ISO 2859-1:1999/Amd 1:2011
  • Standard
    2 pages
    English language
    sale 15% off
  • Standard
    2 pages
    French language
    sale 15% off
  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 7870-1:2020
Control charts - Part 1: General guidelines
ISO 7870-1:2019

This document presents key elements and the philosophy of the control chart approach, and identifies a wide variety of control charts (including those related to the Shewhart control chart, those stressing process acceptance or online process adjustment, and specialized control charts).
It presents an overview of the basic principles and concepts of control charts and illustrates the relationship among various control chart approaches to aid in the selection of the most appropriate part of ISO 7870 for given circumstances. It does not specify statistical control methods using control charts. These methods are specified in the relevant parts of ISO 7870.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    19 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off
SIST
SIST ISO 5725-2:2020
Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
ISO 5725-2:2019

1.1 This document
— amplifies the general principles for designing experiments for the numerical estimation of the precision of measurement methods by means of a collaborative interlaboratory experiment;
— provides a detailed practical description of the basic method for routine use in estimating the precision of measurement methods;
— provides guidance to all personnel concerned with designing, performing or analysing the results of the tests for estimating precision.
NOTE Modifications to this basic method for particular purposes are given in other parts of ISO 5725.
1.2 It is concerned exclusively with measurement methods which yield measurements on a continuous scale and give a single value as the test result, although this single value can be the outcome of a calculation from a set of observations.
1.3 It assumes that in the design and performance of the precision experiment, all the principles as laid down in ISO 5725-1 are observed. The basic method uses the same number of test results in each laboratory, with each laboratory analysing the same levels of test sample; i.e. a balanced uniform-level experiment. The basic method applies to procedures that have been standardized and are in regular use in a number of laboratories.
1.4 The statistical model of ISO 5725-1:1994, Clause 5, is accepted as a suitable basis for the interpretation and analysis of the test results, the distribution of which is approximately normal.
1.5 The basic method, as described in this document, (usually) estimates the precision of a measurement method:
a) when it is required to determine the repeatability and reproducibility standard deviations as defined in ISO 5725-1;
b) when the materials to be used are homogeneous, or when the effects of heterogeneity can be included in the precision values; and
c) when the use of a balanced uniform-level layout is acceptable.
1.6 The same approach can be used to make a preliminary estimate of precision for measurement methods which have not reached standardization or are not in routine use.

  • Standard
    69 pages
    English language
    sale 15% off
  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    73 pages
    French language
    sale 15% off
SIST
SIST ISO 5725-4:2020
Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method
ISO 5725-4:2020

1.1 This document
— specifies basic methods for estimating the bias of a measurement method and the laboratory bias when a measurement method is applied;
— provides a practical approach of a basic method for routine use in estimating the bias of measurement methods and laboratory bias;
— provides a brief guidance to all personnel concerned with designing, performing or analysing the results of the measurements for estimating bias.
1.2 It is concerned exclusively with measurement methods which yield measurements on a continuous scale and give a single value as the measurement result, although the single value can be the outcome of a calculation from a set of observations.
1.3 This document applies when the measurement method has been standardized and all measurements are carried out according to that measurement method.
NOTE In ISO/IEC Guide 99:2007(VIM), "measurement procedure" (2.6) is an analogous term related to the term "measurement method" used in this document.
1.4 This document applies only if an accepted reference value can be established to substitute the true value by using the value, for example:
— of a suitable reference material;
— of a suitable measurement standard;
— referring to a suitable measurement method;
— of a suitable prepared known sample.
1.5 This document applies only to the cases where it is sufficient to estimate bias on one property at a time. It is not applicable if the bias in the measurement of one property is affected by the level of any other property (i.e. it does not consider interferences by any influencing quantity). Comparison of the trueness of two-measurement methods is considered in ISO 5725-6.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    26 pages
    English language
    sale 15% off
  • Standard
    27 pages
    French language
    sale 15% off
SIST
SIST ISO 39511:2018
Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
ISO 39511:2018

This International Standard specifies sequential sampling plans and procedures for inspection by
variables of discrete items.
The plans are indexed in terms of producer’s risk point and the consumer’s risk point. Therefore, they
are suitable not only for the purposes of acceptance sampling, but for the more general purpose of the
testing of simple statistical hypotheses for proportions.
The purpose of this International Standard is to provide procedures for the sequential assessment
of inspection results that may be used to induce the supplier to supply lots of a quality having a high
probability of acceptance. At the same time, the consumer is protected by a prescribed upper limit to
the probability of accepting a lot (or process) of poor quality.
This International Standard is primarily designed for use under the following conditions:
a) where the inspection procedure is to be applied to a continuing series of lots of discrete products
all supplied by one producer using one production process. In such a case, sampling of particular
lots is equivalent to the sampling of the process. If there are different producers or production
processes, this International Standard shall be applied to each one separately;
b) where only a single quality characteristic x of these products is taken into consideration, which
must be measurable on a continuous scale;
c) where the measurement error is negligible (i.e. with a standard deviation no more than 10 % of the
process standard deviation);
d) where production is stable (under statistical control) and the quality characteristic x has a known
standard deviation, and is distributed according to a normal distribution or a close approximation
to the normal distribution;
CAUTION — The procedures in this International Standard are not suitable for application to
lots that have been screened previously for nonconforming items.
e) where a contract or standard defines an upper specification limit U, a lower specification limit L, or
both; an item is qualified as conforming if and only if its measured quality characteristic, x, satisfies
the appropriate one of the following inequalities:
1) x ≤ U (i.e. the upper specification limit is not violated);
2) x ≥ L (i.e. the lower specification limit is not violated);
3) x U and x  L (i.e. neither the upper nor the lower specification limit is violated.)
Inequalities 1) and 2) are called cases with a “single specification limit”, and 3) is the case with “double
specification limits”.
In this International Standard, it is assumed that, where double specification limits apply, conformance
to both specification limits is either equally important to the integrity of the product or is considered
separately for both specification limits. In the first case, it is appropriate to control the combined
percentage of product outside the two specification limits. This is referred to as combined control. In
the second case, nonconformity beyond each of the limits is controlled separately, and this is referred
to as separate control.

  • Standard
    35 pages
    English language
    sale 15% off
  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    35 pages
    French language
    sale 15% off