Simplex and duplex cables to be used for cords - Part 2: Detailed Specification and minimum requirements for simplex ruggedized single mode cables to be used for patchcord/cords Category U

This European Standard describes the minimum set of requirements that a simplex ruggedised single mode fibre cable shall meet in order to allow termination with a connector for use in category U (Uncontrolled Environment).

Simplex- und Duplexkabel für die Anwendung in konfektionierten Leitungen - Teil 2: Bauartspezifikation und Mindestanforderungen für Simplex-Einmodenfaserkabel mit zusätzlichem Schutz für die Kategorie U

Câbles simplex et duplex destinés à être utilisés en tant que cordons -- Partie 2: Spécifications particulières et exigences minimales relatives aux câbles unimodaux simplex renforcés pour usage en cordons / cordons de brassage, en Catégorie U

Simpleksni in dupleksni kabli za vrvice - 2. del: Podrobna specifikacija in minimalne zahteve za simpleksne robustne enorodne optične kable za povezovalne vrvice/vrvice kategorije U

Ta evropski standard opisuje minimalni sklop zahtev, ki jih mora izpolnjevati simpleksni robustni enorodni optični kabel, da se omogoči spoj s konektorjem za uporabo v kategoriji U (nenadzorovano okolje).

General Information

Status
Published
Public Enquiry End Date
29-Nov-2012
Publication Date
01-Dec-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-Nov-2013
Due Date
30-Jan-2014
Completion Date
02-Dec-2013

RELATIONS

Buy Standard

Standard
SIST EN 50551-2:2014
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 50551-2:2014
01-januar-2014
6LPSOHNVQLLQGXSOHNVQLNDEOL]DYUYLFHGHO3RGUREQDVSHFLILNDFLMDLQ
PLQLPDOQH]DKWHYH]DVLPSOHNVQHUREXVWQHHQRURGQHRSWLþQHNDEOH]D
SRYH]RYDOQHYUYLFHYUYLFHNDWHJRULMH8

Simplex and duplex cables to be used for cords - Part 2: Detailed Specification and

minimum requirements for simplex ruggedized single mode cables to be used for
patchcord/cords Category U

Simplex- und Duplexkabel für die Anwendung in konfektionierten Leitungen - Teil 2:

Bauartspezifikation und Mindestanforderungen für Simplex-Einmodenfaserkabel mit
zusätzlichem Schutz für die Kategorie U

Câbles simplex et duplex destinés à être utilisés en tant que cordons -- Partie 2:

Spécifications particulières et exigences minimales relatives aux câbles unimodaux

simplex renforcés pour usage en cordons / cordons de brassage, en Catégorie U
Ta slovenski standard je istoveten z: EN 50551-2:2013
ICS:
33.180.10 2SWLþQD YODNQDLQNDEOL Fibres and cables
SIST EN 50551-2:2014 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 50551-2:2014
---------------------- Page: 2 ----------------------
SIST EN 50551-2:2014
EUROPEAN STANDARD
EN 50551-2
NORME EUROPÉENNE
October 2013
EUROPÄISCHE NORM
ICS 33.180.10
English version
Simplex and duplex cables to be used for cords -
Part 2: Detailed specification and minimum requirements for a 3,0 mm
simplex ruggedised single mode fibre cable to be used for
patchcords/cords category U
Câbles simplex et duplex destinés à être Simplex- und Duplex-Kabel, die in
utilisés en tant que cordons - konfektionierten Leitungen benutzt werden
Partie 2: Spécifications particulières et -
exigences minimales relatives aux câbles Teil 2: Bauartspezifikation und
à fibres optiques unimodales renforcés Mindestanforderungen für ein 3,0 mm-
simplex de 3,0 mm pour usage en Simplex-Einmodenfaserkabel mit
cordons / cordons de brassage, en zusätzlichem Schutz für konfektionierte
Catégorie U Kabel/Leitungen der Kategorie U

This European Standard was approved by CENELEC on 2013-08-19. CENELEC members are bound to comply

with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard

the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on

application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other

language made by translation under the responsibility of a CENELEC member into its own language and notified

to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,

the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.

Ref. No. EN 50551-2:2013 E
---------------------- Page: 3 ----------------------
SIST EN 50551-2:2014
EN 50551-2:2013 – 2 –
Contents Page

Foreword ...................................................................................................................................................................... 3

1 Scope .................................................................................................................................................................... 4

2 Normative references .......................................................................................................................................... 4

3 Cable description ................................................................................................................................................ 5

4 Optical fibres  Single mode optical fibre ....................................................................................................... 7

5 Buffer .................................................................................................................................................................... 7

6 Cable construction .............................................................................................................................................. 8

6.1 General ................................................................................................................................................................. 8

6.2 Mechanical and environmental tests ................................................................................................................. 9

---------------------- Page: 4 ----------------------
SIST EN 50551-2:2014
– 3 – EN 50551-2:2013
Foreword

This document (EN 50551-2:2013) has been prepared by CLC/TC 86A "Optical fibres and optical fibre cables".

The following dates are fixed:
(dop) 2014-08-19
• latest date by which this document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2016-08-19
• latest date by which the national
standards conflicting with this
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.

CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.

EN 50551 is composed with the following parts:

• EN 50551-1, Simplex and duplex cables to be used for cords  Part 1: Blank Detail Specification and

minimum requirements;

• EN 50551-2, Simplex and duplex cables to be used for cords  Part 2: Detailed specification and minimum

requirements for a 3,0 mm simplex ruggedised single mode fibre cable to be used for patchcords/cords

category U.

This European Standard was jointly prepared by the Technical Committee CLC/TC 86A "Optical fibres and optical

fibre cables", and the Technical Committee CLC/TC 86BXA "Fibre optic interconnect, passive and connectorised

components".
__________
---------------------- Page: 5 ----------------------
SIST EN 50551-2:2014
EN 50551-2:2013 – 4 –
1 Scope

This European Standard describes the minimum set of requirements that a simplex ruggedised single mode fibre

cable shall meet in order to allow termination with a connector for use in category U (Uncontrolled Environment).

2 Normative references

The following documents, in whole or in part, are normatively referenced in this document and are indispensable

for its application. For dated references, only the edition cited applies. For undated references, the latest edition of

the referenced document (including any amendments) applies.

EN 60793-1-20, Optical fibres  Part 1-20: Measurement methods and test procedures  Fibre geometry

(IEC 60793-1-20)

EN 60793-1-21, Optical fibres  Part 1-21: Measurement methods and test procedures  Coating geometry

(IEC 60793-1-21)

EN 60793-1-40, Optical fibres  Part 1-40: Measurement methods and test procedures  Attenuation

(IEC 60793-1-40)

EN 60793-1-44, Optical fibres  Part 1-44: Measurement methods and test procedures  Cut-off wavelength

(IEC 60793-1-44)
EN 60793-1-45, Opti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.