SIST EN 3480:2025

Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plate - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa

This document specifies the requirements relating to:
Steel X6CrNiTi18-10 (1.4541)
Air melted
Softened
Plates
6 mm < a ≤ 50 mm
500 MPa ≤ Rm ≤ 700 MPa
for aerospace applications.
W.nr: 1.4541.
ASD-STAN designation: FE-PA3601.

Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht - Platten - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa

No Scope available

Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Plaques - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa

Le présent document spécifie les exigences relatives à :
Acier X6CrNiTi18-10 (1.4541)
Élaboré à l’air
Adouci
Plaques
6 mm < a ≤ 50 mm
500 MPa ≤ Rm ≤ 700 MPa
pour applications aérospatiales.
W.nr : 1.4541.
Désignation ASD-STAN : FE-PA3601.

Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Mehčano - Plošča - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa

General Information

• Status: Published
• Public Enquiry End Date: 30-Nov-2020
• Publication Date: 07-Jan-2025
• ICS: 49.025.10 - Steels
• ICS: 77.140.50 - Flat steel products and semi-products
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 06-Jan-2025
• Due Date: 13-Mar-2025
• Completion Date: 08-Jan-2025
• Ref Project: EN 3480:2024 - Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plates - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa

Relations

• Revised: SIST EN 3480:2007 - Aerospace series - Steel FE-PA3601 (X6CrNiTi18-10) - Air melted - Softened - Plate - 6 mm < a <= 50 mm - 500 MPa <= Rm <= 700 MPa
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2025
Aeronavtika - Jeklo X6CrNiTi18-10 (1.4541) - Taljeno na zraku - Mehčano - Plošča -
6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air melted - Softened - Plate - 6 mm
< a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 Mpa
Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) - Lufterschmolzen - Weichgeglüht -
Platten - 6 mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Élaboré à l'air - Adouci - Plaques - 6
mm < a ≤ 50 mm - 500 MPa ≤ Rm ≤ 700 MPa
Ta slovenski standard je istoveten z: EN 3480:2024
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3480
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2024
EUROPÄISCHE NORM
ICS 49.025.10 Supersedes EN 3480:2007
English Version
Aerospace series - Steel X6CrNiTi18-10 (1.4541) - Air
melted - Softened - Plates - 6 mm < a ≤ 50 mm - 500 MPa ≤
R ≤ 700 MPa
m
Série aérospatiale - Acier X6CrNiTi18-10 (1.4541) - Luft- und Raumfahrt - Stahl X6CrNiTi18-10 (1.4541) -
Élaboré à l'air - Adouci - Plaques - 6 mm < a ≤ 50 mm - Lufterschmolzen - Weichgeglüht - Platten - 6 mm < a ≤
500 MPa ≤ R ≤ 700 MPa 50 mm - 500 MPa ≤ R ≤ 700 MPa
m m
This European Standard was approved by CEN on 4 November 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3480:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9

European foreword
This document (EN 3480:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2025, and conflicting national standards shall be withdrawn at
the latest by June 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 3480:2007.
The main changes with respect to the previous edition are as follows:
— EN
...