SIST EN 4882:2023
(Main)Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa
Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa
This document specifies the requirements relating to:
Steel X5CrNiCu 17-4 (1.4542)
Air melted
Solution treated and precipitation treated
Sheets and strips
a ≤ 6 mm
Rm ≥ 1 070 MPa
for aerospace applications.
W.nr: 1.4542.
The ASD-STAN designation of this material is FE-PM3801.
Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) - Lufterschmolzen - Lösungsgeglüht und ausscheidungsgehärtet - Bleche und Bänder - a ≤ 6 mm - Rm ≥ 1 070 MPa
Dieses Dokument legt die Anforderungen an:
Stahl X5CrNiCu 17-4 (1.4542)
Lufterschmolzen
Lösungsgeglüht und ausscheidungsgehärtet
Bleche und Bänder
a ≤ 6 mm
Rm ≥ 1 070 MPa
für Anwendungen in der Luft- und Raumfahrt fest.
Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Élaboré à l'air - Mis en solution et précipité - Tôles et bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa
Le présent document spécifie les exigences relatives à :
Acier X5CrNiCu 17-4 (1.4542)
Élaboré à l’air
Mis en solution et précipité
Tôles et bandes
a ≤ 6 mm
Rm ≥ 1 070 MPa
pour les applications aérospatiales.
W.nr : 1.4542.
La désignation ASD-STAN du présent matériau est FE-PM3801.
Aeronavtika - Jeklo X5CrNiCu 17-4 (1.4542) - Taljeno - Topilno žarjeno in izločevalno utrjeno - Pločevina in trakovi - a ≤ 6 mm - Rm ≥ 1070 MPa
Ta dokument določa zahteve, ki se navezujejo na:
jeklo X5CrNiCu 17-4 (1.4542),
taljeno,
topilno žarjeno in izločevalno utrjeno,
pločevino in trakove,
a ≤ 6 mm,
Rm ≥ 1070 MPa,
za uporabo v aeronavtiki.
Št. W.: 1.4542.
Oznaka ASD-STAN tega materiala je FE-PM3801.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 4882:2023
01-marec-2023
Aeronavtika - Jeklo X5CrNiCu 17-4 (1.4542) - Taljeno - Topilno žarjeno in
izločevalno utrjeno - Pločevina in trakovi - a ≤ 6 mm - Rm ≥ 1070 MPa
Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and
precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa
Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) - Lufterschmolzen - Lösungsgeglüht
und ausscheidungsgehärtet - Bleche und Bänder - a ≤ 6 mm - Rm ≥ 1 070 MPa
Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Élaboré à l'air - Mis en solution et
précipité - Tôles et bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa
Ta slovenski standard je istoveten z: EN 4882:2022
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
SIST EN 4882:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 4882:2023
---------------------- Page: 2 ----------------------
SIST EN 4882:2023
EN 4882
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2022
EUROPÄISCHE NORM
ICS 49.025.10
English Version
Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air
melted - Solution treated and precipitation treated - Sheets
and strips - a ≤ 6 mm - R ≥ 1 070 MPa
m
Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) -
Élaboré à l'air - Mis en solution et précipité - Tôles et Lufterschmolzen - Lösungsgeglüht und
bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa ausscheidungsgehärtet - Bleche und Bänder - a ≤ 6 mm
- Rm ≥ 1 070 MPa
This European Standard was approved by CEN on 22 August 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
E UR O PÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4882:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4882:2023
EN 4882:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
SIST EN 4882:2023
EN 4882:2022 (E)
European foreword
This document (EN 4882:2022) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical text
or by endorsement, at the latest by June 2023, and conflicting national standards shall be withdrawn at
the latest by June 2023.
Attention is drawn to the possibility that some of the elements of this document may be the su
...
SLOVENSKI STANDARD
oSIST prEN 4882:2021
01-julij-2021
Aeronavtika - Jeklo X5CrNiCu 17-4 (1.4542) - Taljeno - Topilno žarjena in
izločevalno utrjena - Pločevina in trakovi - a ≤ 6 mm - Rm ≥ 1070 MPa
Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air melted - Solution treated and
precipitation treated - Sheets and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa
Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) - Lufterschmolzen - Lösungsgeglüht
und ausgelagert -Bleche und Bänder - a ≤ 6 mm - Rm ≥ 1 070 MPa
Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Élaboré à l'air - Mis en solution et
précipité - Tôles et bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa
Ta slovenski standard je istoveten z: prEN 4882
ICS:
49.025.10 Jekla Steels
77.140.50 Ploščati jekleni izdelki in Flat steel products and semi-
polizdelki products
oSIST prEN 4882:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4882:2021
---------------------- Page: 2 ----------------------
oSIST prEN 4882:2021
DRAFT
EUROPEAN STANDARD
prEN 4882
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2021
ICS 49.025.10
English Version
Aerospace series - Steel X5CrNiCu 17-4 (1.4542) - Air
melted - Solution treated and precipitation treated - Sheets
and strips - a ≤ 6 mm - Rm ≥ 1 070 MPa
Série aérospatiale - Acier X5CrNiCu 17-4 (1.4542) - Luft- und Raumfahrt - Stahl X5CrNiCu 17-4 (1.4542) -
Élaboré à l'air - Mis en solution et précipité - Tôles et Lufterschmolzen - Lösungsgeglüht und ausgelagert -
bandes - a ≤ 6 mm - Rm ≥ 1 070 MPa Bleche und Bänder - a ≤ 6 mm - Rm ≥ 1 070 MPa
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4882:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4882:2021
prEN 4882:2021 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 5
Bibliography . 9
2
---------------------- Page: 4 ----------------------
oSIST prEN 4882:2021
prEN 4882:2021 (E)
European foreword
This document (prEN 4882:2021) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried ou
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.