Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation

This European Standard covers the energy performance calculation of mechanical ventilation and air conditioning systems, including humidification and dehumidification. It takes into account the generation (air handling unit) and distribution (duct system) parts. It includes a simplified calculation of adiabatic cooling systems. It does not cover the emission part (calculation of the required volume flow rates and/or supply air conditions), which is covered in EN 16798-7. It does not include the calculation of heating/cooling generation. This method is focussed on large customized ventilation and air conditioning systems, typically used in commercial buildings, although the application is not restricted on the basis of building or space use type.
A calculation method for ventilation systems with integrated heating/cooling generation, including domestic hot water generation, using a monthly or seasonal calculation interval or a bin method, is provided in a separate standard, EN 16798-5-2. This method does not include humidification and dehumidification or adiabatic cooling.
Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000 1.
NOTE 1   In CEN ISO/TR 52000 2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.
NOTE 2   The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.

Energetische Bewertung von Gebäuden - Lüftung von Gebäuden - Teil 5-1: Berechnungsmethoden für den Energiebedarf von Lüftungs- und Klimaanlagen (Module M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Methode 1: Verteilung und Erzeugung

Performance énergétique des bâtiments - Ventilation des bâtiments - Partie 5-1: Méthodes de calcul des besoins énergétiques des systèmes de ventilation et de conditionnement d'air (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Méthode 1: Distribution et g

Energijske lastnosti stavb - Prezračevanje stavb - 5-1. del: Metode za izračun potrebne energije za sisteme prezračevanja in klimatizacije - Moduli M5-6, M5-8, M6-5, M6-8, M7-5, M7-8 - Metoda 1: Distribucija in proizvodnja - Dopolnilo A1

General Information

Status
Not Published
Public Enquiry End Date
02-Feb-2020
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
23-Sep-2021
Due Date
28-Sep-2021
Completion Date
23-Sep-2021

Relations

Buy Standard

Draft
EN 16798-5-1:2018/oprA1:2020
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 16798-5-1:2018/oprA1:2020
01-januar-2020
Energijske lastnosti stavb - Prezračevanje stavb - 5-1. del: Metode za izračun
potrebne energije za sisteme prezračevanja in klimatizacije - Moduli M5-6, M5-8,
M6-5, M6-8, M7-5, M7-8 - Metoda 1: Distribucija in proizvodnja - Dopolnilo A1
Energy performance of buildings - Ventilation for buildings - Part 5-1: Calculation
methods for energy requirements of ventilation and air conditioning systems (Modules
M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution and generation
Energetische Bewertung von Gebäuden - Lüftung von Gebäuden - Teil 5-1:
Berechnungsmethoden für den Energiebedarf von Lüftungs- und Klimaanlagen (Module
M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Methode 1: Verteilung und Erzeugung
Performance énergétique des bâtiments - Ventilation des bâtiments - Partie 5-1:
Méthodes de calcul des besoins énergétiques des systèmes de ventilation et de
conditionnement d'air (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) - Méthode 1:
Distribution et g
Ta slovenski standard je istoveten z: EN 16798-5-1:2017/prA1
ICS:
91.140.30 Prezračevalni in klimatski Ventilation and air-
sistemi conditioning systems
SIST EN 16798-5-1:2018/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 16798-5-1:2018/oprA1:2020

---------------------- Page: 2 ----------------------
SIST EN 16798-5-1:2018/oprA1:2020


DRAFT
EUROPEAN STANDARD
EN 16798-5-1:2017
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
December 2019
ICS 91.120.10; 91.140.30
English Version

Energy performance of buildings - Ventilation for buildings
- Part 5-1: Calculation methods for energy requirements of
ventilation and air conditioning systems (Modules M5-6,
M5-8, M6-5, M6-8, M7-5, M7-8) - Method 1: Distribution
and generation
Performance énergétique des bâtiments - Ventilation Energetische Bewertung von Gebäuden - Lüftung von
des bâtiments - Partie 5-1: Méthodes de calcul des Gebäuden - Teil 5-1: Berechnungsmethoden für den
besoins énergétiques des systèmes de ventilation et de Energiebedarf von Lüftungs- und Klimaanlagen
conditionnement d'air (Modules M5-6, M5-8, M6-5, (Module M5-6, M5-8, M6-5, M6-8, M7-5, M7-8) -
M6-8, M7-5, M7-8) - Méthode 1: Distribution et g Methode 1: Verteilung und Erzeugung
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 156.

This draft amendment A1, if approved, will modify the European Standard EN 16798-5-1:2017. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.