SIST EN 4529-001:2009

Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification

This standard specifies:
-   the electrical, mechanical, environmental and dimensional characteristics of sealing plugs used in elements of electrical and optical connection;
-   the conditions for qualification, acceptance testing and quality assurance;
-   the test programmes and groups.

Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Verschluss-Stopfen - Teil 001: Technische Lieferbedingungen

Diese Norm legt Folgendes fest:
   die elektrischen, mechanischen, Umwelt- und Maßeigenschaften für Verschluss-Stopfen für elektrische und optische Verbindungselemente;
   die Qualifikations-, Abnahme- und Qualitätssicherungsbedingungen;
   die Prüfprogramme und Prüfgruppen.

Série aérospatiale - Organes de connexion électrique et optique - Obturateur d'étanchéité - Partie 001 : Spécification technique

Aeronavtika - Elementi električnih in optičnih povezav - Tesnilni čepi - 001. del: Tehnična specifikacija

General Information

• Status: Published
• Publication Date: 22-Jun-2009
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 26-May-2009
• Due Date: 31-Jul-2009
• Completion Date: 23-Jun-2009
• Ref Project: EN 4529-001:2006 - Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische und optische Verbindungselemente - Verschluss-Stopfen - Teil 001: Technische LieferbedingungenSérie aérospatiale - Organes de connexion électrique et optique - Obturateur d'étanchéité - Partie 001 : Spécification techniqueAerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 4529-001:2006SIST EN 4529-001:2009en,de01-september-2009SIST EN 4529-001:2009SLOVENSKI
STANDARD



SIST EN 4529-001:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 4529-001May 2006ICS 49.060 English VersionAerospace series - Elements of electrical and optical connection- Sealing plugs - Part 001: Technical specificationSérie aérospatiale - Organes de connexion électrique etoptique - Obturateur d'étanchéité - Partie 001 :Spécification techniqueLuft- und Raumfahrt - Elektrische und optischeVerbindungselemente - Verschluß-Stopfen - Teil 001:Technische LieferbedingungenThis European Standard was approved by CEN on 20 February 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 4529-001:2006: ESIST EN 4529-001:2009



EN 4529-001:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Conditions of use.4 5 Design and description.5 6 Dimensions and mass.5 7 Operation.5 8 Tests.5 9 Quality assurance.8 10 Designation and marking.11 11 Delivery condition.11 12 Packaging.11 13 Storage.11
SIST EN 4529-001:2009



EN 4529-001:2006 (E) 3 Foreword This European Standard (EN 4529-001:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2006, and conflicting national standards shall be withdrawn at the latest by November 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 4529-001:2009



EN 4529-001:2006 (E) 4 1 Scope This standard specifies:  the electrical, mechanical, environmental and dimensional characteristics of sealing plugs used in elements of electrical and optical connection;  the conditions for qualification, acceptance testing and quality assurance;  the test programmes and groups. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 2859-1, Sampling procedures for inspection by attributes — Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection. EN 2591-100*, Aerospace series — Elements of electrical and optical connection — Test methods — Part 100: General. EN 9133, Aerospace series — Quality management systems — Qualification Procedure for aerospace standard parts. MIL-HDBK-454A, General guidelines for electronic equipment. 1) 3 Terms and definitions For the purposes of this standard, the terms and definitions given in EN 2591-100 and the following apply. 3.1 sealing plug an accessory used to fill grommet cavities in an element of connection 4 Conditions of use The sealing plug shall provide an environmental seal in unused cavities when used in elements of connection, throughout the temperature ranges specified below:  class P: maximum operating temperature 125 °C;  class R: maximum operating temperature 150 °C;  class S: maximum operating temperature 200 °C;  class T: maximum operating temperature 260 °C;  class U: maximum operating temperature 350 °C.
* And all parts quoted. 1) Published by: Department of Defense (DOD), The Pentagon, Washington D.C. 20301, USA. SIST EN 4529-001:2009



EN 4529-001:2006 (E) 5 5 Design and description Refer to the relevant product standard. 6 Dimensions and mass The dimensions of the sealing plugs and their mass shall be as defined in the product standard. 7 Operation Tools for installing and extracting the sealing plugs shall be defined in the product standard. 8 Tests The tests of EN 2591-100, applicable in the context of this standard as well as the details necessary for implement
...