iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12913:2000

(Main)

Products used for treatment of water intended for human consumption - Powdered diatomaceous earth

Products used for treatment of water intended for human consumption - Powdered diatomaceous earth

This European standard is applicable to powdered diatomaceous earth used for treatment of water intended for human consumption. It describes the characteristics of powdered diatomaceous earth and specifies the requirements and the corresponding test methods for powdered diatomaceous earth and gives information on its use in water treatment.

Produkte zur Aufbereitung von Wasser für den menschlichen Gebrauch - Kieselgur

Diese Europäische Norm gilt für Kieselgur zur Aufbereitung von Wasser für den menschlichen Gebrauch. Sie beschreibt die charakteristischen Eigenschaften von Kieselgur und legt die Anforderungen sowie die entsprechenden Prüfverfahren für Kieselgur fest. Sie gibt Informationen für seine Anwendung in der Wasseraufbereitung.

Produits utilisés pour le traitement de l'eau destinée a la consommation humaine - Terre de diatomées en poudre

La présente norme européenne est applicable à la terre de diatomées en poudre utilisée pour le traitement de l'eau destinée à la consommation humaine. Elle décrit les caractéristiques de la terre de diatomées en poudre, et spécifie les prescriptions et les méthodes d'essai correspondantes pour la terre de diatomées en poudre et donne les informations pour son emploi dans le traitement de l'eau.

Proizvodi, ki se uporabljajo za pripravo pitne vode - Prašnata diatomejska zemlja

General Information

Status
Withdrawn
Publication Date
31-Oct-2000
Withdrawal Date
28-Feb-2006
ICS
13.060.20 - Drinking water
71.100.80 - Chemicals for purification of water
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Mar-2006
Due Date
01-Mar-2006
Completion Date
01-Mar-2006
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Ref Project
EN 12913:1999 - Products used for treatment of water intended for human consumption - Powdered diatomaceous earth

Relations

Replaced By
SIST EN 12913:2006 - Products used for treatment of water intended for human consumption - Powdered diatomaceous earth
Effective Date
22-Dec-2008

Buy Standard

EN 12913:2000EN 12913:2000
PreviousNext
Standard
EN 12913:2000
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Proizvodi, ki se uporabljajo za pripravo pitne vode - Prašnata diatomejska zemljaProdukte zur Aufbereitung von Wasser für den menschlichen Gebrauch - KieselgurProduits utilisés pour le traitement de l'eau destinée a la consommation humaine - Terre de diatomées en poudreProducts used for treatment of water intended for human consumption - Powdered diatomaceous earth71.100.80Chemicals
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 901:2025(Main)
Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite
EN 901:2024

This document is applicable to sodium hypochlorite used for treatment of water intended for human consumption. It describes the characteristics of sodium hypochlorite and specifies the requirements and the corresponding test methods for sodium hypochlorite. It gives information on its use in water treatment. It also determines the rules relating to safe handling and use of sodium hypochlorite (see Annex B).
NOTE   While this document is not applicable to sodium hypochlorite generated in situ (see bibliographic reference [6]), the limits for impurities and chemical parameters apply.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17978:2025(Main)
Products used for treatment of water intended for human consumption and swimming pool water - Glass beads and glass granulate
EN 17978:2024

This document is applicable to glass beads and glass granulate intended for treatment of water for human consumption, swimming pool and/or spa water. It solely describes the characteristics of glass beads and glass granulate and specifies the requirements and the corresponding test methods for glass beads and glass granulate.
General information on glass beads and glass granulate and general rules relating to safety is provided in Annex A.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12122:2025(Main)
Chemicals used for treatment of water intended for human consumption - Ammonia solution
EN 12122:2024

This document is applicable to ammonia solution used for treatment of water intended for human consumption. It describes the characteristics and specifies the requirements of ammonia solution and refers to the corresponding analytical methods. It gives information for its use in water treatment. It also provides basic information relating to safe handling and use of ammonia solution (see Annex B).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1302:2025(Main)
Chemicals used for treatment of water intended for human consumption - Aluminium-based coagulants - Analytical methods
EN 1302:2024

This document is applicable to aluminium-based coagulants used for treatment of water intended for human consumption. It specifies analytical methods to be used for products described in EN 878, EN 882, EN 885, EN 886, EN 887, EN 935 and EN 17034.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17971:2024(Main)
Devices for in-situ generation of biocides - Ozone
EN 17971:2024

This document is applicable to devices for the generation and dosing of ozone. The ozone is generated in these devices according to the technology of dielectric barrier discharge. According to EN 1278 and EN 15074, ozone is suited for the use of the treatment of water intended for human consumption (drinking water), and for the treatment of swimming pool water respectively. Ozone can be added to the water for disinfection and for oxidative purposes. This document can also be applied for other technologies to generate ozone, e.g. electrolysis or UV irradiation, as far as reasonable or applicable.
This document specifies device’s construction, and test methods for the equipment used for in situ generation of ozone. It also specifies requirements for instructions for installation, operation, maintenance, safety and for documentation to be provided with the product.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17841:2024(Main)
Chemicals used for treatment of water intended for human consumption - Antifouling for membranes – Sulfamic acid
EN 17841:2024

This document is applicable to sulphamic acid used as antifoulant for membranes in the treatment of water intended for human consumption. It describes the characteristics and specifies the requirements and the corresponding analytical methods for sulphamic acid. It gives information on their use as antifoulant for membranes in water treatment in Annex A.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17818:2024(Main)
Devices for in-situ generation of biocides - Active chlorine generated from sodium chloride by electrolysis
EN 17818:2023

This document defines the minimum requirements for treatment systems, which generate the active substance - “Active chlorine” - from sodium chloride by electrolysis for on-site (in situ) operation.
The in situ generated active substance (IGAS), in this case active chlorine, may be put into a solution (“off-line”) or directly generated in the pipes (“in-line”).
This document specifies the device construction, and test methods for the equipment used for in situ generation of active chlorine. It specifies requirements for instructions for installation, operation, maintenance, safety and for documentation to be provided with the product.
The in situ generation of active substances and the placing of their precursors on the EU market are subject to the specifications of the Biocidal Products Regulation (EU) 528/2012 [“Biocidal products”]. Active substances, generated by devices, which are claiming compliance with this document, shall comply with the BPR for both the registered active chlorine, quality standards and the precursor in accordance with appropriate application and “Product Type” as listed in the BPR.
This standard does not identify applications for in situ devices for generation of active chlorine. The range of applications for in situ generation of chlorine is diverse. It is the responsibility of the economic operator/product supplier, claiming compliance with this standard, to identify the appropriate system type and operating conditions for the specific application and to:
-   specify the quality of the biocide appropriate to the application. This may be defined in national or international standards;
-   specify the appropriate product type and operating conditions (concentration, dosage rate and quality of the active chlorine);
-   specify any other regulatory requirements relevant to the specific application;
-   specify the appropriate precursor sodium chloride, for the application;
-   and to label the product accordingly.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1407:2023(Main)
Chemicals used for treatment of water intended for human consumption - Anionic and non-ionic polyacrylamides
EN 1407:2023

This document is applicable to anionic and non-ionic polyacrylamides used for treatment of water intended for human consumption. It describes the characteristics of anionic and non-ionic polyacrylamides and specifies the requirements and the corresponding test methods for anionic and non-ionic polyacrylamides. It gives information on their use in water treatment.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1408:2023(Main)
Chemicals used for treatment of water intended for human consumption - Poly(diallyldimethylammonium chloride)
EN 1408:2023

This document is applicable to poly(diallyldimethylammonium chloride) used for treatment of water intended for human consumption. It describes the characteristics of poly(diallyldimethylammonium chloride) and specifies the requirements and the corresponding test methods for poly(diallyldimethylammonium chloride). It gives information on their use in water treatment.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1410:2023(Main)
Chemicals used for treatment of water intended for human consumption - Cationic polyacrylamides
EN 1410:2023

This document is applicable to cationic polyacrylamides used for treatment of water intended for human consumption. It describes the characteristics of cationic polyacrylamides and specifies the requirements and the corresponding test methods for cationic polyacrylamides. It gives information on their use in water treatment.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day