SIST EN 4652-321:2018
(Main)Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard
Aerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard
This European Standard specifies the characteristics of screwed on coupling (N interface) coaxial right
angle plugs – 50 ohms. The cable to connector assembly is a crimp technology.
Luft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 321: Typ 3, N-Schnittstelle - Krimpausführung, Freier - Steckverbinder 90°abgewinkelt- - Produktnorm
Série aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 321 : Type 3, interface N - Version à sertir - Fiche coudée - Norme de produit
Aeronavtika - Konektorji, koaksialni, radiofrekvenčni - 321. del: Tip 3, vmesnik N - Izvedba s stisljivimi priključki - Pravokotni vtič - Standard za proizvod
Ta evropski standard določa lastnosti koaksialnih
pravokotnih vtičev z vijačnim spojem (vmesnik N) – 50 ohmov. Sklop kabla in konektorja je tehnologija izvedbe s stisljivimi priključki.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURL]YRGLuft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 321: Typ 3, N-Schnittstelle - Krimpausführung, Freier - Steckverbinder 90°abgewinkelt- - ProduktnormSérie aérospatiale - Connecteurs coaxiaux pour radio fréquences - Partie 321 : Type 3, interface N - Version à sertir - Fiche coudée - Norme de produitAerospace series - Connectors, coaxial, radio frequency - Part 321: Type 3, N interface - Crimp assembly version - Right angle plug - Product standard49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4652-321:2017SIST EN 4652-321:2018en,fr,de01-februar-2018SIST EN 4652-321:2018SLOVENSKI
STANDARD
SIST EN 4652-321:2018
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4652-321
November
t r s y ICS
v {ä r x r English Version
Aerospace series æ Connectorsá coaxialá radio frequency æ Part
u t sã Type
uá N interface æ Crimp assembly version æ Right angle plug æ Product standard Série aérospatiale æ Connecteurs coaxiaux pour radio fréquences æ Partie
u t s ã Type
uá interface N æ Version à sertir æ Fiche coudée æ Norme de produit
Luftæ und Raumfahrt æ Koaxiale HochfrequenzæSteckverbinder æ Teil
u t sã Typ
uá NæSchnittstelle æ Krimpausführungá Freier æ Steckverbinder
{ r ¹abgewinkeltæ æ Produktnorm This European Standard was approved by CEN on
t u July
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v x w tæ u t sã t r s y ESIST EN 4652-321:2018
EN 4652-321:2017 (E) 2 Contents
Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Required characteristics . 4 4 Test methods . 10 5 Qualification. 12 6 Quality assurance . 12 7 Designation . 12 8 Marking . 13 9 Packaging . 13 10 Storage . 13
SIST EN 4652-321:2018
EN 4652-321:2017 (E) 3 European foreword This document (EN 4652-321:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be withdrawn at the latest by May 2018 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4652-321:2018
EN 4652-321:2017 (E) 4 1 Scope This European Standard specifies the characteristics of screwed on coupling (N interface) coaxial right angle plugs – 50 ohms. The cable to connector assembly is a crimp technology. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2424, Aerospace series — Marking of aerospace products EN 2591∗, Aerospace series — Elements of electrical and optical connection — Test methods 1) EN 2812, Aerospace series — Stripping of electric cables EN 4652-001, Aerospace series — Connectors, coaxial, radio frequency — Part 001: Technical specification
EN 4652-322, Aerospace series — Connectors, coaxial, radio frequency — Part 322: Type 3, N interface — Crimp version — Square flange receptacle — Product standard EN 9133, Aerospace series — Quality management systems — Qualification procedure for aerospace standard parts TR 6058, Aerospace series — Cable code identification list 2) 3 Required characteristics The connection technology shall comply to all required tests described in Clause 4. All interfaces shall comply to EN 4652-001. Holes for lockwire shall exist in case of no self-locking device on the product. Water ingress resistance is required in unmated conditions for cable group A.
∗ All parts quoted in this European Standard. 1) Published as ASD-STAN Prestandard at the date of publication of this European Standard. (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this European Standard. (www.asd-stan.org). SIST EN 4652-321:2018
EN 4652-321:2017 (E) 5 3.1 Configuration, dimension and mass Mass without heatshrink tubing. See Figure 1 and Table 1. Dimensions in millimetres
Key 1 Prospective cap 2 Marking axis 3 Straight knurl 4 Hex 18,9/Flat Figure 1 — Nut type G Dimensions in millimetres
Key 1 Prospective cap 2 14,3 Flats 3 Straight knurl a Center contact Figure 2 — Nut type H and connector dimensions SIST EN 4652-321:2018
EN 4652-321:2017 (E) 6 Dimensions in millimetres Nut type: G
Nut type: H
Key 1 3 holes diameter 1° to 120° 2 Hex 12/2 flats 3 Hex 14/2 flats 4 2 holes diameter 0,75 5 1 hole diameter 0,8 Marking: see Clause 8. Figure 3 — Type G and H over view Table 1 — N right angle plug dimensions and mass Cable code (see TR 6058) Cable group Nut
type A
max. B
max. ØC
ØD ØE ØF Mass g WM C G 47,9 37,5 12,4 4,2 1,15 3 41,68 WD E H 50,5 41,5 12,4 8,4 2,5 6,3 69,12 WN F H 50,5 41,5 12,4 8,4 2,5 6,3 69,12
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.