Aerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard

This European Standard specifies the characteristics of screwed on coupling (N interface) coaxial square
flange receptacle – 50 ohms. The cable to connector assembly is a crimp technology.

Luft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 322: Typ 3, N-Schnittstelle - Crimpverbindung - fester Steckverbinder mit quadratischem Montageflansch - Produktnorm

Diese Europäische Norm legt die Eigenschaften von koaxialen, festen Steckverbindern mit quadratischem Montageflansch, 50 Ohm, mit Schraubkupplung (N-Schnittstelle) fest. Der Anschluss des Steckverbinders an die Leitung erfolgt über eine Crimpverbindung.

Série aérospatiale - Connecteurs coaxiaux pour radiofréquences - Partie 322 : Type 3, interface N - Version à sertir - embase à collerette carrée - Norme de produit

Aeronavtika - Konektorji, koaksialni, radiofrekvenčni - 322. del: Tip 3, vmesnik N - Izvedba s stisljivimi priključki - Podlaga s kvadratno prirobnico - Standard za proizvod

Ta evropski standard določa lastnosti koaksialnih vtičnic s podlago s kvadratno prirobnico in vijačnim spojem (vmesnik N) – 50 ohmov. Sklop kabla in konektorja je tehnologija izvedbe s stisljivimi priključki.

General Information

Status
Published
Publication Date
17-Dec-2017
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
22-Nov-2017
Due Date
27-Jan-2018
Completion Date
18-Dec-2017

Buy Standard

Standard
EN 4652-322:2018
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.SURL]YRGLuft- und Raumfahrt - Koaxiale Hochfrequenz-Steckverbinder - Teil 322: Typ 3, N-Schnittstelle - Crimpverbindung - fester Steckverbinder mit quadratischem Montageflansch - ProduktnormSérie aérospatiale - Connecteurs coaxiaux pour radiofréquences - Partie 322 : Type 3, interface N - Version à sertir - embase à collerette carrée - Norme de produitAerospace series - Connectors, coaxial, radio frequency - Part 322: Type 3, N interface - Crimp version - Square flange receptacle - Product standard49.060Aerospace electric equipment and systems31.220.10Plug-and-socket devices. ConnectorsICS:Ta slovenski standard je istoveten z:EN 4652-322:2017SIST EN 4652-322:2018en,fr,de01-februar-2018SIST EN 4652-322:2018SLOVENSKI
STANDARD



SIST EN 4652-322:2018



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 4652-322
November
t r s y ICS
v {ä r x r English Version
Aerospace series æ Connectorsá coaxialá radio frequency æ Part
u t tã Type
uá N interface æ Crimp version æ Square flange receptacle æ Product standard Série aérospatiale æ Connecteurs coaxiaux pour radiofréquences æ Partie
u t t ã Type
uá interface N æ Version à sertir æ embase à collerette carrée æ Norme de produit
Luftæ und Raumfahrt æ Koaxiale HochfrequenzæSteckverbinder æ Teil
u t tã Typ
uá NæSchnittstelle æ Crimpverbindung æ fester Steckverbinder mit quadratischem Montageflansch æ Produktnorm This European Standard was approved by CEN on
s v August
t r s yä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Serbiaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s y CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
v x w tæ u t tã t r s y ESIST EN 4652-322:2018



EN 4652-322:2017 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Required characteristics . 4 4 Test methods . 9 5 Qualification. 11 6 Quality assurance . 11 7 Designation . 11 8 Marking . 12 9 Packaging . 12 10 Storage . 12
SIST EN 4652-322:2018



EN 4652-322:2017 (E) 3 European foreword This document (EN 4652-322:2017) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by May 2018, and conflicting national standards shall be withdrawn at the latest by May 2018. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 4652-322:2018



EN 4652-322:2017 (E) 4 1 Scope This European Standard specifies the characteristics of screwed on coupling (N interface) coaxial square flange receptacle – 50 ohms. The cable to connector assembly is a crimp technology. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 2424, Aerospace series — Marking of aerospace products EN 2591∗, Aerospace series — Elements of electrical and optical connection — Test methods 1) EN 2812, Aerospace series — Stripping of electric cables EN 4652-001, Aerospace series — Connectors, coaxial, radio frequency — Part 001: Technical specification EN 4652-320, Aerospace series — Connectors, coaxial, radio frequency — Part 320: Type 3, N interface —Crimp version — Straight plug — Product standard 1) EN 9133, Aerospace series — Quality Management Systems — Qualification Procedure for Aerospace Standard Products TR 6058, Aerospace series — Cable code identification list 2) 3 Required characteristics  The connection technology shall comply to all required tests described in Clause 4.  All interface shall comply to EN 4652-001.  Holes for lockwire shall exist in case of no self-locking device on the product.  Water ingress resistance is required in mated conditions for all cable groups.  Water ingress resistance is required in unmated conditions for cable group A.
∗ All parts quoted in this European Standard. 1) Published as ASD-STAN Prestandard at the date of publication of this European Standard. (www.asd-stan.org). 2) Published as ASD-STAN Technical Report at the date of publication of this European Standard. (www.asd-stan.org). SIST EN 4652-322:2018



EN 4652-322:2017 (E) 5 3.1 Configuration, dimension and mass Mass without heatshrink tubing See Figure 1 and Table 1. Dimensions in millimetres
Key 1 Prospective cap 2 Marking axis 3 Reference plane Figure 1 — N Square flange receptacle Marking: see Clause 8. Table 1 — N square flange receptacle dimensions and mass Cable code (see TR 6058) Cable group A
max. B
max. ØC ØD ØE ØF G
max. Mass g WM C 47,2 38,8 14,4 4,2 1,15 3 3 45,43 WD E 50,4 42,3 14 8,4 2,5 6,3 2 48,75 WN F 50,4 42,3 14 8,4 2,5 6,3 2 48,75
3.2 Materials and finish Center contact (front active part) . : Copper alloy gold plated over nickel undercoat Ferrule (if existing) .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.