SIST EN 60745-2-8:2003/A11:2007

Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers

Amandma A11:2007 je dodatek k standardu SIST EN 60745-2-8:2003
Deals with the safety of hand-held motor-operated or magnetically driven tools, specific requirements for shears and nibblers. The rated voltage being not more than 250 V for single-phase a.c. or d.c. and 440 V for three-phase a.c. tools.

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit -- Teil 2-8: Besondere Anforderungen für Blechscheren und Nibbler

Outils électroportatifs à moteur - Sécurité -- Partie 2-8: Règles particulières pour les cisailles à métaux et les grignoteuses

Električna ročna orodja - Varnost - 2-8. del: Posebne zahteve za škarje in sekalnike pločevine

General Information

• Status: Withdrawn
• Publication Date: 11-Sep-2007
• Withdrawal Date: 06-Jun-2012
• ICS: 25.120.10 - Forging equipment. Presses. Shears
• ICS: 25.140.20 - Electric tools
• Technical Committee: VGA - Safety of household and similar electrical appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 07-Jun-2012
• Due Date: 30-Jun-2012
• Completion Date: 07-Jun-2012
• Directive: 98/37/EC - Machinery
• Ref Project: EN 60745-2-8:2003/A11:2007 - Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for shears and nibblers

Relations

• Replaced By: SIST EN 60745-2-8:2009 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
• Effective Date: 01-Dec-2009
• Amends: SIST EN 60745-2-8:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
• Effective Date: 01-Oct-2007
• Amends: SIST EN 60745-2-8:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
• Effective Date: 29-Jan-2023
• Amends: SIST EN 60745-2-8:2003 - Hand-held motor-operated electric tools - Safety -- Part 2-8: Particular requirements for shears and nibblers
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-8:2003/A11:2007
01-oktober-2007
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DãNDUMHLQVHNDOQLNH
SORþHYLQH
Hand-held motor-operated electric tools - Safety - Part 2-8: Particular requirements for
shears and nibblers
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-8: Besondere
Anforderungen für Blechscheren und Nibbler
Outils électroportatifs a moteur - Sécurité - Partie 2-8: Regles particulieres pour les
cisailles a métaux et les grignoteuses
Ta slovenski standard je istoveten z: EN 60745-2-8:2003/A11:2007
ICS:
25.120.10 Kovaški stroji. Stiskalnice. Forging equipment. Presses.
Škarje Shears
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 60745-2-8:2003/A11:2007 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 60745-2-8/A11

NORME EUROPÉENNE
April 2007
EUROPÄISCHE NORM

ICS 25.140.20; 25.140.30; 25.120.10


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-8: Particular requirements for shears and nibblers



Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-8: Règles particulières Sicherheit -
Teil 2-8: Besondere Anforderungen
pour les cisailles à métaux
et les grignoteuses für Blechscheren und Nibbler




This amendment A11 modifies the European Standard EN 60745-2-8:2003; it was approved by CENELEC on
2006-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60745-2-8:2003/A11:2007 E

---------------------- Page: 2 ----------------------

EN 60745-2-8:2003/A11:2007 – 2 –
Foreword
This amendment to the European Standard EN 60745-2-8:2003 was prepared by the Technical Committee
CENELEC TC 61F, Safety of hand-held and transportable motor-operated electric tools.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as
amendment A11 to EN 60745-2-8:2003 on 2006-12-01.
This amendment was prepared to align the Subclause 6.2 with the new Subclause 6.2 in EN 60745-1:2006.
Moreover, vibration values determined with the new 6.2 are complying with the requirements of the Physical
Agents Directive Vibration 2002/44/EC.
The following dates were fixed:
– latest date by which the amendment has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-12-01
– latest date by which the national standards conflicting
with
...