SIST EN 60684-3-271:2011

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1

This part of IEC 60684 gives the requirements for four types of heat-shrinkable, flame retarded, fluid resistant, elastomer sleevings, nominal shrink ratio of 2:1. Type A: standard wall thickness for use at temperatures up to 120 °C Type B: thin wall thickness for use at temperatures up to 120 °C Type C: standard wall thickness for use at temperatures up to 150 °C Type D: thin wall thickness for use at temperatures up to 150 °C These sleevings are normally supplied with internal diameters up to 102 mm for the standard wall thickness and up to 51 mm for the thin wall thickness. The standard colour is black. Sizes or colours other than those specifically listed in this standard may be available as custom items. These items are considered to comply with this standard if they comply with the property requirements listed in Tables 1, 2, 3, 4, 5 and 6 except for dimensions and mass. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 271: Wärmeschrumpfende Elastomerschläuche, flammwidrig, flüssigkeitsbeständig, Schrumpfverhältnis 2:1

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 271: Gaines thermorétractables en élastomère, retardées à la flamme, résistant aux fluides, rapport de rétreint 2:1

La CEI 60684-3-271:2011 donne les exigences relatives à quatre types de gaines thermorétractables en élastomère, ignifugées, résistant aux fluides, de rapport de rétreint nominal de 2:1.  - Type A: épaisseur de paroi standard utilisée à des températures pouvant atteindre 120 °C  - Type B: épaisseur de paroi fine utilisée à des températures pouvant atteindre 120 °C  - Type C: épaisseur de paroi standard utilisée à des températures pouvant atteindre 150 °C  - Type D: épaisseur de paroi fine utilisée à des températures pouvant atteindre 150 °C. La modification technique significative par rapport à l'édition antériure est l'ajout d'un type de gaine adapté pour être utilisé à des températures pouvant atteindre 150 °C. Cette édition comprend la modification technique significative suivante par rapport à l'édition antérieure: l'ajout d'un type de gaine adapté pour être utilisé à des températures pouvant atteindre 150 °C.

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne vrste cevi - 271. list: Toplotno skrčljive elastomerne cevi, ognjevarne, odporne proti tekočinam, razmerje krčenja 2:1

Ta del IEC 60684 podaja zahteve za štiri tipe toplotno skrčljivih poliolefinskih ognjevarnih elastomernih cevi, odpornih proti tekočinam, z nazivnim razmerjem krčenja 2 : 1. Tip A: standardna debelina stene za uporabo pri temperaturah do 120 °C Tip B: majhna debelina stene za uporabo pri temperaturah do 120 °C Tip C: standardna debelina stene za uporabo pri temperaturah do 150 °C Tip D: majhna debelina stene za uporabo pri temperaturah do 150 °C. Te cevi se običajno dobavljajo z notranjimi premeri do 102 mm pri standardnih debelinah stene in do 51 mm pri majhnih debelinah stene. Standardna barva je črna. Velikosti ali barve, ki niso navedene v tem standardu, so lahko na voljo na zahtevo. Ti predmeti so skladni s tem standardom, če izpolnjujejo zahteve glede lastnosti, navedene v preglednicah 1, 2, 3, 4, 5 in 6, razen mer in mase. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri taki uporabi, ne le na podlagi same specifikacije.

General Information

• Status: Published
• Publication Date: 15-Sep-2011
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Sep-2011
• Due Date: 12-Nov-2011
• Completion Date: 16-Sep-2011
• Ref Project: EN 60684-3-271:2011 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1

Relations

• Revised: SIST EN 60684-3-271:2005 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
• Effective Date: 06-May-2014
• Replaces: SIST EN 60684-3-271:2005 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60684-3-271:2005 - Flexible insulating sleeving -- Part 3: Specifications for individual types of sleeving -- Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1
• Effective Date: 07-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60684-3-271:2011
01-oktober-2011
*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHYUVWHFHYLOLVW
7RSORWQRVNUþOMLYHHODVWRPHUQHFHYLRJQMHYDUQHRGSRUQHSURWLWHNRþLQDP
UD]PHUMHNUþHQMD
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
271: Heat-shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 271:
Wärmeschrumpfende Elastomerschläuche, flammwidrig, flüssigkeitsbeständig,
Schrumpfverhältnis 2:1
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -
Feuille 271: Gaines thermorétractables en élastomère, retardées à la flamme, résistant
aux fluides, rapport de rétreint 2:1
Ta slovenski standard je istoveten z: EN 60684-3-271:2011
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60684-3-271:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60684-3-271:2011

---------------------- Page: 2 ----------------------

SIST EN 60684-3-271:2011

EUROPEAN STANDARD
EN 60684-3-271

NORME EUROPÉENNE
August 2011
EUROPÄISCHE NORM

ICS 29.035.20 Supersedes EN 60684-3-271:2004


English version


Flexible insulating sleeving -
Part 3: Specifications for individual types of sleeving -
Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded, fluid
resistant, shrink ratio 2:1
(IEC 60684-3-271:2011)


Gaines isolantes souples -  Isolierschläuche -
Partie 3: Spécifications pour types Teil 3: Anforderungen für einzelne
particuliers de gaines - Schlauchtypen -
Feuille 271: Gaines thermorétractables en Blatt 271: Wärmeschrumpfende
élastomère, retardées à la flamme, Elastomerschläuche, flammwidrig,
résistant aux fluides, rapport de rétreint flüssigkeitsbeständig, Schrumpfverhältnis
2:1 2:1
(CEI 60684-3-271:2011) (IEC 60684-3-271:2011)




This European Standard was approved by CENELEC on 2011-07-26. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60684-3-271:2011 E

---------------------- Page: 3 ----------------------

SIST EN 60684-3-271:2011
EN 60684-3-271:2011 - 2 -
Foreword
The text of document (15/627/FDIS), future edition 3 of IEC 60684-3-271, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 60684-3-271 on 2011-07-26.
This European Standard supersedes EN 60684-3-271:2004.
EN 60684-3-271:2011 includes the following significant technical change from EN 60684-3-271:2004: the
addition of a type of sleeving suitable for use at temperatures up to 150 °C.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2012-04-26
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-07-26
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60684-3-271:2011 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 60684-3-271:2011
- 3 - EN 60684-3-271:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60684-1 2003 Flexible insulating sleeving - EN 60684-1 2003
Part 1: Definitions and general requirements


IEC 60684-2 1997 Flexible insulating sleeving - EN 60684-2 1997
+ corr. December 1997 Part 2: Methods of test


IEC 60757 1983 Code for designation of colours HD 457 S1 1985


ISO 846 1997 Plastics - Evaluation of the action of EN ISO 846 1997
microorganisms


ISO 1817 2005 Rubber, vulcanized - Determination of the - -
effect of liquids

---------------------- Page: 5 ----------------------

SIST EN 60684-3-271:2011

---------------------- Page: 6 ----------------------

SIST EN 60684-3-271:2011
IEC 60684-3-271
®

Edition 3.0 2011-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Flexible insulating sleeving –
Part 3: Specifications for individual types of sleeving – Sheet 271: Heat-
shrinkable elastomer sleevings, flame retarded, fluid resistant, shrink ratio 2:1

Gaines isolantes souples –
Partie 3: Spécifications pour types particuliers de gaines – Feuille 271: Gaines
thermorétractables en élastomère, retardées à la flamme, résistant aux fluides,
rapport de rétreint 2:1

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX M
ICS 29.035.20 ISBN 978-2-88912-547-0

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 60684-3-271:2011
– 2 – 60684-3-271  IEC:2011
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

FLEXIBLE INSULATING SLEEVING –

Part 3: Specifications for individual types of sleeving –
Sheet 271: Heat-shrinkable elastomer sleevings, flame retarded,
fluid resistant, shrink ratio 2:1


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60684-3-271 has been prepared by IEC technical committee 15:
Solid electrical insulating materials.
This third edition cancels and replaces the second edition published in 2004, and constitutes a
technical revision. It includes the following significant technical change from the previous
edition: the addition of a type of sleeving suitable for use at temperatures up to 150 °C.
The text of this standard is based on the following documents:
FDIS Report on voting
15C/627/FDIS 15C/639/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.

---------------------- Page: 8 ----------------------

SIST EN 60684-3-271:2011
60684-3-271  IEC:2011 – 3 –
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
A list of all the parts in the IEC 60684 series, under the general title Flexible insulating
sl
...