SIST EN IEC 60674-3-7:2023
(Main)Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:2023)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet 7: Fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-7:2023)
This sheet of IEC 60674-3 gives the requirements for fluoroethylene-propylene (FEP) films used
for electrical insulation.
Materials which conform to this specification meet established levels of performance. However,
the selection of a material by a user for a specific application can be based on the actual
requirements necessary for adequate performance in that application and not based on this
specification alone.
Safety warning: It is the responsibility of the user of the methods contained or referred to in this
document to ensure that they are used in a safe manner
Isolierfolien für elektrotechnische Zwecke - Teil 3: Bestimmungen für einzelne Materialien - Blatt 7: Fluorethylen-Propylen-(FEP)-Folien zur elektrischen Isolierung (IEC 60674-3-7:2023)
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux particuliers - Feuille 7: Films de fluoroéthylène-propylène (FEP) utilisés dans l'isolation électrique (IEC 60674-3-7:2023)
IEC 60674-3-7: 2023 spécifie les exigences pour les films de fluoroéthylènepropylène (FEP) utilisés dans l'isolation électrique. Les matériaux conformes à la présente spécification satisfont à des niveaux établis de performance. Toutefois, l'utilisateur peut choisir le matériau destiné à une application spécifique en se fondant sur les exigences réelles nécessaires pour assurer des performances adéquates dans le cadre de l'application considérée et non sur la présente spécification seule. Avertissement de sécurité: il incombe à l'utilisateur des méthodes contenues ou référencées dans le présent document de s'assurer que celles-ci sont utilisées en toute sécurité. Cette deuxième édition annule et remplace la première édition parue en 1992. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) le titre de la norme a été modifié pour harmoniser l'intitulé de la série IEC 60674;
b) les références normatives ont été mises à jour.
Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale - 7. list: Fluoretilen-propilenske (FEP) folije, ki se uporabljajo za električno izolacijo (IEC 60674-3-7:2023)
Ta list standarda IEC 60674-3 določa zahteve za fluoretilen-propilenske (FEP) folije, ki se uporabljajo za električno izolacijo.
Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem delovanja. Vendar uporabnik lahko material za določeno uporabo izbere glede na dejanske zahteve, ki omogočajo ustrezno delovanje pri tej uporabi, in ne samo na podlagi te specifikacije.
Varnostno opozorilo: Končni uporabnik je odgovoren za varno uporabo metod, ki so zajete ali omenjene v tem dokumentu.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60674-3-7:2023
01-november-2023
Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale
- 7. list: Fluoretilen-propilenske (FEP) folije, ki se uporabljajo za električno izolacijo
(IEC 60674-3-7:2023)
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet
7: Fluoroethylene-propylene (FEP) films used for electrical insulation (IEC 60674-3-
7:2023)
Isolierfolien für elektrotechnische Zwecke - Teil 3: Bestimmungen für einzelne
Materialien - Blatt 7: Fluorethylen-Propylen-(FEP)-Folien zur elektrischen Isolierung (IEC
60674-3-7:2023)
Films plastiques à usages électriques - Partie 3: Spécifications pour matériaux
particuliers - Feuille 7: Films de fluoroéthylène-propylène (FEP) utilisés dans l'isolation
électrique (IEC 60674-3-7:2023)
Ta slovenski standard je istoveten z: EN IEC 60674-3-7:2023
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
SIST EN IEC 60674-3-7:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60674-3-7:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 60674-3-7:2023
EUROPEAN STANDARD EN IEC 60674-3-7
NORME EUROPÉENNE
EUROPÄISCHE NORM September 2023
ICS 29.035.20 Supersedes EN 60674-3-7:1998
English Version
Plastic films for electrical purposes - Part 3: Specifications for
individual materials - Sheet 7: Fluoroethylene-propylene (FEP)
films used for electrical insulation
(IEC 60674-3-7:2023)
Films plastiques à usages électriques - Partie 3: Isolierfolien für elektrotechnische Zwecke - Teil 3:
Spécifications pour matériaux particuliers - Feuille 7: Films Bestimmungen für einzelne Materialien - Blatt 7:
de fluoroéthylène-propylène (FEP) utilisés dans l'isolation Fluorethylen-Propylen-(FEP)-Folien zur elektrischen
électrique Isolierung
(IEC 60674-3-7:2023) (IEC 60674-3-7:2023)
This European Standard was approved by CENELEC on 2023-09-22. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60674-3-7:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60674-3-7:2023
EN IEC 60674-3-7:2023 (E)
European foreword
The text of document 15/980/CDV, future edition 2 of IEC 60674-3-7, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60674-3-7:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-06-22
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-09-22
document have to be withdrawn
This document supersedes EN 60674-3-7:1998 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60674-3-7:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be adde
...
SLOVENSKI STANDARD
oSIST prEN IEC 60674-3-7:2023
01-februar-2023
Plastične folije za električne namene - 3. del: Specifikacije za posamezne materiale
- 7. list: Fluoretilen-propilenske (FEP) folije, ki se uporabljajo za električno izolacijo
Plastic films for electrical purposes - Part 3: Specifications for individual materials - Sheet
7: Fluoroethylene-propylene (FEP) films used for electrical insulation
Spécification pour les films en matière plastique à usages électriques - Partie 3:
Spécifications pour matériaux particuliers - Feuille 7: Prescriptions pour les films de
fluoroéthylène-propylène (FEP) utilisés dans l'isolation électrique
Ta slovenski standard je istoveten z: prEN IEC 60674-3-7:2022
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
oSIST prEN IEC 60674-3-7:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60674-3-7:2023
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60674-3-7:2023
15/980/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60674-3-7 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-12-02 2023-02-24
SUPERSEDES DOCUMENTS:
15/965/CD, 15/973/CC
IEC TC 15 : SOLID ELECTRICAL INSULATING MATERIALS
SECRETARIAT: SECRETARY:
United States of America Mr Solomon Chiang
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 112
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Plastic films for electrical purposes - Part 3: Specifications for individual materials – Sheet 7:
Fluoroethylene-propylene (FEP) films used for electrical insulation
PROPOSED STABILITY DATE: 2025
NOTE FROM TC/SC OFFICERS:
Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60674-3-7:2023
IEC CDV 60674-3-7/Ed2 IEC:2022 – 2 – 15/980/CDV
1 CONTENTS
2
3 FOREWORD . 3
4 INTRODUCTION . 5
5 1 Scope . 6
6 2 Normative references . 6
7 3 Terms and definitions . 6
8 4 Classification . 6
9 5 Designation . 7
10 6 General requirement . 7
11 7 Dimensions . 7
12 7.1 Thickness . 7
13 7.2 Width . 8
14 8 Film length/roll diameter . 8
15 9 Properties . 8
16 9.1 Properties not dependent on thickness .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.