iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

oSIST prEN 17017-1:2024

(Main)

Electronic Public Procurement - Fulfilment - Part 1: Choreographies

Electronic Public Procurement - Fulfilment - Part 1: Choreographies

This choreography describes the exchange of information in the Fulfilment phase between seller and buyer where the seller wants to announce delivery of the ordered goods or services. The purpose of the fulfilment it is to monitor the executions of the contract. This process is the process between the ordering process and the billing process. The billing process can start when fulfilment has been initiated.
The business value for this is
• To prepare the buyers organisation for the physical delivery.
• To enabling an automatic check of delivery for the buying organisation before paying the received invoice.
• To match the ordered products with the physical deliveries, such as serial numbers, lot identifiers and other information that may not be present at the time the goods were ordered.
• The assist in getting an accurate calculation of the environmental footprint of the goods by including the emission during the transport.
• To feed data into the logistic process, so no retyping is needed during the transport of the goods.
Transactions used in the specified choreographies are out of scope. These transactions are specified in the related transaction specification on “Fulfilment Transactions”.

Elektronisches öffentliches Beschaffungswesen - Erfüllung - Teil 1: Choreographien

Passation électronique des marchés publics - Exécution - Partie 1 : Chorégraphies

Elektronska javna naročila - Izpolnitev - 1. del: Koreografije

General Information

Status
Not Published
Public Enquiry End Date
15-Feb-2024
ICS
35.240.63 - IT applications in trade
Technical Committee
ITC - Information technology
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
19-Dec-2023
Due Date
07-May-2024
Ref Project
prEN 17017-1 - Electronic Public Procurement - Fulfilment - Part 1: Choreographies

Buy Standard

prEN 17017-1:2024 - BARVEprEN 17017-1:2024 - BARVE
PreviousNext
Draft
prEN 17017-1:2024 - BARVE
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 17017-1:2024
01-februar-2024
Elektronska javna naročila - Izpolnitev - 1. del: Koreografije
Electronic Public Procurement - Fulfilment - Part 1: Choreographies
Elektronisches öffentliches Beschaffungswesen - Erfüllung - Teil 1: Choreographien
Passation électronique des marchés publics - Exécution - Partie 1 : Chorégraphies
Ta slovenski standard je istoveten z: prEN 17017-1
ICS:
35.240.63 Uporabniške rešitve IT v IT applications in trade
trgovini
oSIST prEN 17017-1:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 17017-1:2024

---------------------- Page: 2 ----------------------
oSIST prEN 17017-1:2024


DRAFT
EUROPEAN STANDARD
prEN 17017-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

December 2024
ICS
English Version

Electronic Public Procurement - Fulfilment - Part 1:
Choreographies
Marchés publics électroniques - Accomplissement - Elektronisches öffentliches Beschaffungswesen -
Partie 1 : Choréographies Erfüllung - Teil 1: Choreographien
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 440.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17017-1:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 17017-1:2024
prEN 17017-1:2023(E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Business Environment and high-level business requirements . 7
4.1 Choreography (business) Goals . 7
4.2 Business environment . 7
4.3 Organization and business partners involved . 9
4.4 High Level Business process requirements . 10
5 Processes . 11
5.1 Introduction . 11
5.2 Business process variants.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16931-1:2017+A1:2020/AC:2020(Corrigendum)
Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice
EN 16931-1:2017+A1:2019/AC:2020

This European Standard establishes a semantic data model of the core elements of an electronic invoice. The semantic model includes only the essential information elements that an electronic invoice needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and for domestic trade. The semantic model may be used by organizations in the private and the public sector for public procurement invoicing. It may also be used for invoicing between private sector enterprises. It has not been specifically designed for invoicing consumers.
This European Standard complies at least with the following criteria:
-   it is technologically neutral;
-   it is compatible with relevant international standards on electronic invoicing;
-   the application of this standard should comply with the requirements for the protection of personal data of Directive 95/46/EC, having due regard to the principles of privacy and data protection by-design, data minimization, purpose limitation, necessity and proportionality;
-   it is consistent with the relevant provisions of Directive 2006/112/EC [2];
-   it allows for the establishment of practical, user-friendly, flexible and cost-efficient electronic invoicing systems;
-   it takes into account the special needs of small and medium-sized enterprises as well as of sub-central contracting authorities and contracting entities;
-   it is suitable for use in commercial transactions between enterprises.

  • Corrigendum
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16931-3-3:2020(Main)
Electronic invoicing - Part 3-3: Syntax binding for UN/CEFACT XML Industry Invoice D16B
CEN/TS 16931-3-3:2020

This CEN Technical Specification (TS) contains the mapping between the semantic data model of an electronic invoice (EN 16931-1)
and the following syntax: UN/CEFACT XML Industry Invoice D16B. For each element in the semantic model (including sub-elements
or supplementary components such as Code List identifiers) it is defined which element in the syntax is to be used to contain its
information contents. Any mismatches between semantics, format, cardinality or structure are indicated.
Any rules to be followed when using the specific syntax are stated informally in this TS. Together with this TS a set of validation
artefacts is published, including formalisation of the rules.
In addition, the deliverable shall unambiguously define the code lists and, where applicable, the subset of codes to be used for each
coded element in the model of EN 16931-1 when using the UN/CEFACT XML Industry Invoice D16B syntax as defined in CEN/TS
16931-3-3. The deliverable must guide the user how and where to apply for additions to these code lists. It will be issued as an annex
to the existing text of CEN/TS 16931-3-3:2017

  • Technical specification
    218 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16931-3-2:2020(Main)
Electronic invoicing - Part 3-2: Syntax binding for ISO/IEC 19845 (UBL 2.1) invoice and credit note
CEN/TS 16931-3-2:2020

This CEN Technical Specification (TS) contains the mapping between the semantic data model of an electronic invoice (EN 16931-1)
and the following syntax: UBL 2.1. For each element in the semantic model (including sub-elements or supplementary components
such as Code List identifiers) it is defined which element in the syntax is to be used to contain its information contents. Any
mismatches between semantics, format, cardinality or structure are indicated.
Any rules to be followed when using the specific syntax are stated informally in this TS. Together with this TS a set of validation
artefacts is published, including formalisation of the rules.
In addition, the deliverable shall unambiguously define the code lists and, where applicable, the subset of codes to be used for each
coded element in the model of EN 16931-1 when using the UBL 2.1 syntax as defined in CEN/TS 16931-3-2. The deliverable must
guide the user how and where to apply for additions to these code lists. It will be issued as an annex to the existing text of CEN/TS
16931-3-2:2017

  • Technical specification
    265 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16931-7:2020(Main)
Electronic invoicing - Part 7: Methodology for the development and use of EN 16931-1 compliant structured Core Invoice Usage Specifications
CEN/TS 16931-7:2020

This document applies in case a CIUS is produced as a specification with the objective of registering it in the appropriate registry. This document also establishes requirements for the steps to be taken in the process of creating Core Invoice Usage Specifications (CIUS) as defined in EN 16931-1. Furthermore this document provides guidance for the creation and implementation of a CIUS.
The following points are the focus:
- steps that need to be taken in consideration to avoid unnecessary proliferation and fragmentation in the use of CIUSs;
-  guidance on the creation and implementation of CIUSs, with a quality control objective.
It should be noted that it is planned to apply the same principles and processes to extensions that are documented in a separate document.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 16931-3-4:2020(Main)
Electronic invoicing - Part 3-4: Syntax binding for UN/EDIFACT INVOIC D16B
CEN/TS 16931-3-4:2020

This CEN Technical Specification (TS) contains the mapping between the semantic data model of an electronic invoice (EN 16931-1) and the following syntax: UN/EDIFACT INVOIC D16B. For each element in the semantic model (including sub-elements or supplementary componentts sucha as Code List identifiers) it is defined which element in the syntax is to be used to contain its information contents. Any mismatches between semantics, format, cardinality or structure are indicated. Any rules to be followed when using the specific syntax are stated informally in this TS. Together with this TS a set of validation artefacts is published, including formalisation of the rules.

  • Technical specification
    225 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16931-1:2017+A1:2020(Main)
Electronic invoicing - Part 1: Semantic data model of the core elements of an electronic invoice
EN 16931-1:2017+A1:2019

***Access to this CEN and SIST technical publication has been sponsored by the European Commission.***
This European Standard establishes a semantic data model of the core elements of an electronic invoice. The semantic model includes only the essential information elements that an electronic invoice needs to ensure legal (including fiscal) compliance and to enable interoperability for cross-border, cross sector and for domestic trade. The semantic model may be used by organizations in the private and the public sector for public procurement invoicing. It may also be used for invoicing between private sector enterprises. It has not been specifically designed for invoicing consumers.
This European Standard complies at least with the following criteria:
-   it is technologically neutral;
-   it is compatible with relevant international standards on electronic invoicing;
-   the application of this standard should comply with the requirements for the protection of personal data of Directive 95/46/EC, having due regard to the principles of privacy and data protection by-design, data minimization, purpose limitation, necessity and proportionality;
-   it is consistent with the relevant provisions of Directive 2006/112/EC [2];
-   it allows for the establishment of practical, user-friendly, flexible and cost-efficient electronic invoicing systems;
-   it takes into account the special needs of small and medium-sized enterprises as well as of sub-central contracting authorities and contracting entities;
-   it is suitable for use in commercial transactions between enterprises.

  • Standard
    158 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 419210:2019(Main)
Applicability of CEN Standards to Qualified Electronic Seal Creation Device under the EU Regulation N°910/2014 (eIDAS)
CEN/TR 419210:2019

This document considers requirements of the eIDAS regulation and use cases for qualified electronic seal creation devices and how these requirements may be met by standards.
These use cases will take into account differences in articles 26 and 36 of eIDAS on (sole) control of the signatory and seal creator on its signature / seal creation data, whilst also recognizing the commonalities.
This may possibly lead to identifying requirements for updates to existing standards.
The proposed table of content is the following:
1 Scope
2 References
3 Terms and definitions
3.1 Terminology
3.2 Abbreviations
4 A Consideration of Relevant Regulatory Requirements
5 Use cases
6 Analysis of features of Standard and Use cases
6.1 EN 419 211-x
6.1.1 Main Features relating to use cases
6.1.2 Applicability to use cases
6.2 EN 419 221-5
6.2.1 Main Features relating to use cases
6.2.2 Applicability to use cases
6.3 EN 419 241-1 / -2
6.3.1 Main Features relating to use cases
7 Summary of Conclusions

  • Technical report
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16931-6:2018(Main)
Electronic invoicing - Part 6: Result of the test of EN 16931-1 with respect to its practical application for an end user
CEN/TR 16931-6:2017

This Technical Report specifies the result of the test of the European standard on the semantic data model for the core elements of an electronic invoice. The test focusses on its practical application for an end user.

  • Technical report
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    85 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16931-4:2017(Main)
Electronic invoicing - Part 4: Guidelines on interoperability of electronic invoices at the transmission level
CEN/TR 16931-4:2017

This Technical Report gives guidelines on interoperability of electronic invoices at the transmission level, taking into account the need of ensuring the authenticity of the origin and the integrity of the electronic invoices.

  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 16931-5:2017(Main)
Electronic invoicing - Part 5: Guidelines on the use of sector or country extensions in conjunction with EN 16931-1, methodology to be applied in the real environment
CEN/TR 16931-5:2017

This Technical Report gives guidelines on the optional use of sector or country extensions in conjunction with the European Norm on the semantic data model for the core elements of an electronic invoice, including a methodology to be applied in the real environment.

  • Technical report
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day