SIST EN 2346-002:2009
(Main)Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 002: General
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 002: General
This standard specifies the list of product standards and common characteristics of fire resistant or fire-proof electrical cables for use in the on-board electrical systems of aircraft at operating temperatures between - 65 °C and 260 °C. (Except otherwise specified in the product standard).
Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen zwischen - 65 °C und 260 °C - Teil 002: Allgemeines
Diese Norm legt die Liste der Produktnormen und die allgemeinen Kennwerte von feuerbeständigen oder feuerfesten elektrischen Leitungen zur Verwendung in elektrischen Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen 65 °C und 260 °C fest (falls nicht anders in der Produktnorm festgelegt).
Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 °C et 260 °C - Partie 002 : Généralités
Aeronavtika - Električni, ognjevzdržni kabli - Delovne temperature med - 65 °C in 260 °C - 002. del: Splošno
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen zwischen - 65 °C und 260 °C - Teil 002: AllgemeinesSérie aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 °C et 260 °C - Partie 002 : GénéralitésAerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 002: General49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2346-002:2006SIST EN 2346-002:2009en01-februar-2009SIST EN 2346-002:2009SLOVENSKI
STANDARD
SIST EN 2346-002:2009
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2346-002
June 2006 ICS 49.060 English Version
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 002: General
Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 °C et 260 °C - Partie 002 : Généralités
Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen zwischen - 65 °C und 260 °C - Teil 002: Allgemeines This European Standard was approved by CEN on 3 February 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2006 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2346-002:2006: ESIST EN 2346-002:2009
EN 2346-002:2006 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Definitions.4 4 List of product standards.4 5 Materials and construction.5 6 Identification and marking.6 7 Technical specification.7
SIST EN 2346-002:2009
EN 2346-002:2006 (E) 3 Foreword This European Standard (EN 2346-002:2006) has been prepared by the European Association of Aerospace Manufacturers - Standardization (AECMA-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of AECMA, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2006, and conflicting national standards shall be withdrawn at the latest by December 2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cy
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.