SIST EN 2346-005:2014

Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard

EN 2346-005 specifies the characteristics of light weight fire proof, unscreened, electrical cables for use in the on-board electrical systems of aircraft at operating temperature between - 65 °C and 260 °C. This cable has not been demonstrated to be arc resistance at a.c.voltages above 200 V rms (network 115/200 V rms). Single core is UV Laser printable in accordance with EN 3838; UV laser markability is not mandatory for multicore cables.

Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen zwischen - 65 °C und 260 °C - Teil 005: DW-Familie, ein-und mehradrige Leitungen UV-laser bedruckbar - Gewichtsoptimiert - Produktnorm

Diese Europäische Norm legt die Anforderungen an gewichtsoptimierte, feuerbeständige, ungeschirmte elek-trische Leitungen zur Verwendung in elektrischen Bordnetzen von Luftfahrzeugen bei Betriebstemperaturen zwischen −65 °C und 260 °C fest.
Bei dieser Leitung konnte nicht nachgewiesen werden, dass sie bei Wechselspannungen von mehr als 200 V effektiv (Netzwerk 115/200 V effektiv) lichtbogenbeständig ist.
Einadrige Leitungen sind nach EN 3838 mit UV-Laser bedruckbar; die Kennzeichnung durch UV-Laser ist bei mehradrigen Leitungen nicht zwingend vorgeschrieben.

Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 °C et 260 °C - Partie 005: Famille DW, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit

La présente Norme européenne spécifie les caractéristiques des câbles électriques, non blindés, résistant au
feu, version allégée, utilisés dans les systèmes électriques à bord des aéronefs, à des températures de
fonctionnement comprises entre - 65 °C et 260 °C.
Ce câble n'a pas démontré sa résistance aux arcs électriques avec des tensions alternatives supérieures à
200 V rms (tension réseau 115/200 V rms).
Le monoconducteur est marquable au laser UV conformément à l'EN 3838 ; le marquage au laser UV n'est
pas obligatoire pour des câbles multiconducteurs.

Aeronavtika - Električni ognjevzdržni kabli - Delovne temperature med -65 °C in 260 °C - 005. del: Družina DW, snop enožilnih in večžilnih kablov z možnostjo UV-laserskega tiskanja - Lahki kabli - Standard za proizvod

General Information

• Status: Withdrawn
• Publication Date: 12-Jan-2014
• Withdrawal Date: 10-Dec-2017
• ICS: 49.060 - Aerospace electric equipment and systems
• Technical Committee: I13 - Imaginarni 13
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 11-Dec-2017
• Due Date: 03-Jan-2018
• Completion Date: 11-Dec-2017
• Ref Project: EN 2346-005:2013 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard

Relations

• Replaced By: SIST EN 2346-005:2018 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
• Effective Date: 21-Nov-2017
• Revised: SIST EN 2346-005:2018 - Aerospace series - Cable, electrical, fire resistant - Operating temperatures between -65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard
• Effective Date: 08-Mar-2017

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen zwischen - 65 °C und 260 °C - Teil 005: DW-Familie, ein-und mehradrige Leitungen UV-laser bedruckbar - Gewichtsoptimiert - ProduktnormSérie aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 °C et 260 °C - Partie 005: Famille DW, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produitAerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 2346-005:2013SIST EN 2346-005:2014sl01-februar-2014SIST EN 2346-005:2014SLOVENSKI
STANDARD



SIST EN 2346-005:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 2346-005
December 2013 ICS 49.060 English Version
Aerospace series - Cable, electrical, fire resistant - Operating temperatures between - 65 °C and 260 °C - Part 005: DW family, single UV laser printable and multicore assembly - Light weight -Product standard
Série aérospatiale - Câbles électriques résistant au feu - Températures de fonctionnement comprises entre - 65 °C et 260 °C - Partie 005: Famille DW, fil simple marquable au laser UV et éléments assemblés - Version allégée - Norme de produit
Luft- und Raumfahrt - Feuerbeständige elektrische Leitungen - Betriebstemperaturen zwischen - 65 °C und 260 °C - Teil 005: DW-Familie, ein-und mehradrige Leitungen UV-laser bedruckbar - Gewichtsoptimiert - Produktnorm This European Standard was approved by CEN on 28 September 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 2346-005:2013 ESIST EN 2346-005:2014



EN 2346-005:2013 (E) 2 Contents Page Foreword .3 1 Scope .4 2 Normative references .4 3 Terms and definitions .4 4 Materials and construction .4 5 Required characteristics .6 6 Tests .6 7 Quality assurance .9 8 Designation .9 9 Identification and marking . 10 10 Packaging, labelling and delivery lengths . 10 11 Technical specification . 10
SIST EN 2346-005:2014



EN 2346-005:2013 (E) 3 Foreword This document (EN 2346-005:2013) has been prepared by the Aerospace and Defence Industries Association of Europe - Standardization (ASD-STAN). After enquiries and votes carried out in accordance with the rules of this Association, this Standard has received the approval of the National Associations and the Official Services of the member countries of ASD, prior to its presentation to CEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2014, and conflicting national standards shall be withdrawn at the latest by June 2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. SIST EN 2346-005:2014



EN 2346-005:2013 (E) 4 1 Scope This European Standard specifies the characteristics of light weight fire proof, unscreened, electrical cables for use in the on-board electrical systems of aircraft at operating temperature between – 65 °C and 260 °C. This cable has not been demonstrated to be arc resistance at a.c.voltages above 200 V rms (network 115/200 V rms).
Single core is UV Laser printable in accordance with EN 3838; UV laser markability is not mandatory for multicore cables. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 2234, Aerospace series — Cable, electrical, fire resistant — Technical specification EN 2346-002, Aerospace series — Cable, electrical, fire resistant — Operating temperatures between − 65 °C and 260 °C — Part 002: General
EN 3475 (all parts), Aerospace series — Cables, electrical, aircraft use — Test methods
EN 3838, Aerospace series — Requirements and tests on user-applied markings on aircraft electrical cables
EN 4608-001, Aerospace series — Cable, electrical, fire resistant — Single and multicore assembly, screened and jacketed — Operating temperatures betwe
...