SIST EN 13286-47:2012
(Main)Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
This European Standard specifies the test methods for the laboratory determination of the California bearing ratio and immediate bearing index.
The tests are appropriate to that part of the mixture up to a maximum particle size of 22,4 mm.
When immersion in water is specified as part of the curing of the specimen, this European Standard also includes the determination of vertical swelling of the specimen before the determination of the California bearing ratio.
Ungebundene und hydraulisch gebundene Gemische - Teil 47: Prüfverfahren zur Bestimmung des CBR-Wertes (California bearing ratio), des direkten Tragindex (IBI) und des linearen Schwellwertes
Diese Europäische Norm legt Laborprüfverfahren zur Bestimmung des CBR-Wertes (engl.: California bearing ratio; CBR) und des direkten Tragindex (engl.: immediate bearing index; IBI) fest.
Der Versuch wird an Laborproben durchgeführt, deren maximale Korngröße 22,4 mm beträgt.
Für den Fall, dass Probekörper unter Wasser gelagert werden sollen, enthält diese Europäische Norm auch die vor der Bestimmung des CBR-Wertes vorzunehmende Bestimmung der vertikalen Quellung der Probekörper.
Mélanges non traités et mélanges à base de liant hydraulique - Partie 47 : Méthodes d’essai de la capacité portante au moyen de l’indice portant CBR, de l’indice portant immédiat et du gonflement
La présente Norme européenne spécifie les méthodes d'essai pour la détermination en laboratoire de l’indice portant Californien (CBR) et de l’indice de portance immédiate (IPI).
Les essais conviennent aux parties de mélanges dont la granulométrie maximale est de 22,4 mm.
Lorsqu’une conservation de l’éprouvette en immersion est requise, la présente Norme européenne comprend également la détermination du gonflement vertical avant la détermination de l’indice portant Californien.
Nevezane in hidravlično vezane zmesi - 47. del: Preskusna metoda za ugotavljanje kalifornijskega indeksa nosilnosti (CBR), neposrednega indeksa nosilnosti (IBI) in linearnega nabrekanja
Ta evropski standard določa preskusne metode za ugotavljanje kalifornijskega indeksa nosilnosti in neposrednega indeksa nosilnosti. Preskusi so ustrezni za zmes, katere delci ne presegajo 22,4 mm. Če je potopitev v vodo določena kot del obravnavanja preskušanca, evropski standard vključuje tudi ugotavljanje vertikalnega nabrekanja preskušanca pred ugotavljanjem kalifornijskega indeksa nosilnosti.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ungebundene und hydraulisch gebundene Gemische - Teil 47: Prüfverfahren zur Bestimmung des CBR-Wertes (California bearing ratio), des direkten Tragindex (IBI) und des linearen SchwellwertesMélanges non traités et mélanges à base de liant hydraulique - Partie 47 : Méthodes d’essai de la capacité portante au moyen de l’indice portant CBR, de l’indice portant immédiat
et du gonflementUnbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-47:2012SIST EN 13286-47:2012en,fr,de01-september-2012SIST EN 13286-47:2012SLOVENSKI
STANDARDSIST EN 13286-47:20041DGRPHãþD
SIST EN 13286-47:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13286-47
April 2012 ICS 93.080.20 Supersedes EN 13286-47:2004English Version
Unbound and hydraulically bound mixtures - Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 47: Méthode d'essai pour la détermination de l'indice portant Californien (CBR), de l'indice de portance immédiate (IPI) et du gonflement linéaire
Ungebundene und hydraulisch gebundene Gemische - Teil 47: Prüfverfahren zur Bestimmung des CBR-Wertes (California bearing ratio), des direkten Tragindex (IBI) und des linearen Schwellwertes This European Standard was approved by CEN on 9 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13286-47:2012: ESIST EN 13286-47:2012
EN 13286-47:2012 (E) 2 Contents Page Foreword .31Scope .52Normative references .53Terms and definitions .54Principle .55Apparatus .65.1Apparatus for specimen manufacture .65.2Additional apparatus for soaking procedure and measurement of swelling .65.3Additional apparatus for determination of the California bearing ratio and immediate bearing index .66Test sample for the California bearing ratio and immediate bearing index tests .67Specimen manufacture for the California bearing ratio and immediate bearing index tests .78Curing for California bearing ratio test.78.1General .78.2Curing by prevention of evaporation .78.3Curing that permits full soaking .88.4Curing consisting of ‘prevention of evaporation’ followed by soaking .89Procedure for California bearing ratio and immediate bearing index determination .910Calculation and expression of results .910.1Force/penetration curve .910.2Calculation of California bearing ratio/immediate bearing index . 1010.3Reporting California bearing ratio/immediate bearing index results . 1011Test report . 11 SIST EN 13286-47:2012
EN 13286-47:2012 (E) 3 Foreword This document (EN 13286-47:2012) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2012, and conflicting national standards shall be withdrawn at the latest by October 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN 13286-47:2004. The following changes have been made in comparison with EN 13286-47:2004: Editorial changes; Addition of the 2nd paragraph in Clause 6. This European standard is one of a series of standards as listed below: EN 13286-1, Unbound and hydraulically bound mixtures — Part 1: Test methods for laboratory reference density and water content — Introduction, general requirements and sampling; EN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory reference density and water content — Proctor compaction; EN 13286-3, Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory reference density and water content — Vibrocompression with controlled parameters; EN 13286-4, Unbound and hydraulically bound mixtures — Part 4: Test methods for laboratory reference density and water content — Vibrating hammer; EN 13286-5, Unbound and hydraulically bound mixtures — Part 5: Test methods for laboratory reference density and water content — Vibrating table; EN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for unbound mixtures; EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures; EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures; EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures; EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures; SIST EN 13286-47:2012
EN 13286-47:2012 (E) 4 EN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag; EN 13286-45, Unbound and hydraulically bound mixtures — Part 45: Test method for the determination of the workability period of hydraulically bound mixtures; EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the determination of the moisture condition value; EN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling; EN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the determination of degree of pulverisation; EN 13286-49, Unbound and hydraulically bound mixtures — Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder; EN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction; EN 13286-51, Unbound and hydraulically bound mixtures — Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrating hammer compaction; EN 13286-52, Unbound and hydraulically bound mixtures — Part 52: Method for the manufacture of test specimens of hydraulically bound mixtures using vibrocompression; EN 13286-53, Unbound and hydraulically bound mixtures — Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression; prEN 13286-54, Unbound and hydraulically bound mixtures — Part 54: Test method for the determination of frost susceptibility — Resistance to freezing and thawing of hydraulically bound mixtures. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 13286-47:2012
EN 13286-47:2012 (E) 5 1 Scope This European Standard specifies the test methods for the laboratory determination of the California bearing ratio and immediate bearing index. The tests are appropriate to that part of the mixture up to a maximum particle size of 22,4 mm. When immersion in water is specified as part of the curing of the specimen, this European Standard also includes the determination of vertical swelling of the specimen before the determination of the California bearing ratio. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1097-5:2008, Tests for mechanical and physical properties of aggregates — Part 5: Determination of the water content by drying in a ventilated oven EN 13286-2, Unbound and hydraulically bound mixtures — Part 2: Test methods for laboratory reference density and water content — Proctor compaction 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 California bearing ratio
ratio used to characterise the bearing capacity of a mixture, determined immediately after compaction, or after a period of curing 3.2 immediate bearing index immediate California bearing ratio test without surcharge 3.3 Proctor compactive effort compactive effort used in the Proctor test described in EN 13286-2 3.4 modified Proctor compactive effort compactive effort used in the modified Proctor test described in EN 13286-2 3.5 curing period of time and storage condition between manufacture and testing of the specimen for the California bearing ratio 4 Principle The relationship between force and penetration is determined when a cylindrical piston of a standard cross-sectional area is made to penetrate a specimen of a mixture, contained within a mould, at a given rate. SIST EN 13286-47:2012
EN 13286-47:2012 (E) 6 The California bearing ratio or immediate bearing index is calculated by expressing the force on the piston for a given penetration as a percentage of a reference force. 5 Apparatus 5.1 Apparatus for specimen manufacture 5.1.1 Proctor mould B with appropriate spacer disc, if required conforming to EN 13286-2. 5.1.2
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.