SIST EN 15466-2:2024
(Main)Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali
Primers for cold and hot applied joint sealants - Part 2: Determination of resistance against alkali
This European Standard describes a method for determining the resistance against alkali of primers for cold and hot applied joint sealants.
Voranstriche für kalt und heiß verarbeitbare Fugenmassen - Teil 2: Bestimmung der Alkalibeständigkeit
Dieses Dokument beschreibt ein Verfahren zur Bestimmung der Alkalibeständigkeit von Voranstrichen für kalt und heiß verarbeitbare Fugenmassen.
Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 2 : Détermination de la résistance aux produits alcalin
Le présent document décrit une méthode permettant de déterminer la résistance aux produits alcalins des primaires pour les produits de scellement de joints appliqués à froid et à chaud.
Predhodni premazi za hladno in toplo nanosljive tesnilne mase za stike - 2. del: Določevanje alkalne odpornosti
Ta evropski standard opisuje metodo za določevanje alkalne odpornosti predhodnih premazov za hladno in toplo nanosljive tesnilne mase za stike.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15466-2:2024
01-junij-2024
Nadomešča:
SIST EN 15466-2:2010
Predhodni premazi za hladno in toplo nanosljive tesnilne mase za stike - 2. del:
Določevanje alkalne odpornosti
Primers for cold and hot applied joint sealants - Part 2: Determination of resistance
against alkali
Voranstriche für kalt und heiß verarbeitbare Fugenmassen - Teil 2: Bestimmung der
Alkalibeständigkeit
Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 2 :
Détermination de la résistance aux produits alcalin
Ta slovenski standard je istoveten z: EN 15466-2:2024
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 15466-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15466-2:2024
---------------------- Page: 2 ----------------------
SIST EN 15466-2:2024
EN 15466-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 15466-2:2009
English Version
Primers for cold and hot applied joint sealants - Part 2:
Determination of resistance against alkali
Impressions pour mastics de joints appliqués à froid et Voranstriche für kalt und heiß verarbeitbare
à chaud - Partie 2 : Détermination de la résistance aux Fugenmassen - Teil 2: Bestimmung der
alcalis Alkalibeständigkeit
This European Standard was approved by CEN on 12 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15466-2:2024 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15466-2:2024
EN 15466-2:2024 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Test equipment . 4
6 Procedure. 5
6.1 Preparation and conditioning of primer and glass plates. 5
6.2 Preparation of test specimen . 5
6.3 Loading of test specimen . 5
6.4 Tests on the chemical solutions to characterize alkali resistance . 5
6.5 Tests on the immersed specimen . 5
6.6 Te
...
SLOVENSKI STANDARD
oSIST prEN 15466-2:2023
01-september-2023
Nadomešča:
SIST EN 15466-2:2010
Predhodni premazi za hladno in toplo nanosljive tesnilne mase za stike - 2. del:
Določevanje odpornosti proti alkalijam
Primers for cold and hot applied joint sealants - Part 2: Determination of resistance
against alkali
Voranstriche für kalt und heiß verarbeitbare Fugenmassen - Teil 2: Bestimmung der
Alkalibeständigkeit
Primaires pour produits de scellement de joints appliqués à froid et à chaud - Partie 2 :
Détermination de la résistance aux produits alcalins
Ta slovenski standard je istoveten z: prEN 15466-2
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
oSIST prEN 15466-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15466-2:2023
---------------------- Page: 2 ----------------------
oSIST prEN 15466-2:2023
DRAFT
EUROPEAN STANDARD
prEN 15466-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2023
ICS 93.080.20 Will supersede EN 15466-2:2009
English Version
Primers for cold and hot applied joint sealants - Part 2:
Determination of resistance against alkali
Primaires pour produits de scellement de joints Voranstriche für kalt und heiß verarbeitbare
appliqués à froid et à chaud - Partie 2 : Détermination Fugenmassen - Teil 2: Bestimmung der
de la résistance aux produits alcalins Alkalibeständigkeit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 227.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15466-2:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15466-2:2023
prEN 15466-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Test Equipment . 4
6 Procedure. 5
6.1 Preparation and Conditioning of primer and glass plates . 5
6.2 Preparation of test specimen . 5
6.3 Loading of test specimen .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.