SIST EN ISO 12137-2:2006
(Main)Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus (ISO 12137-2:1997)
Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus (ISO 12137-2:1997)
This part of ISO 12137 specifies a method for determining, using a pointed stylus, the mar resistance of a single coating of a paint, varnish or related product, or the upper layer of a multicoat system. Part 1 of ISO 12137 specifies a mathod using a curved stylus. The choice between the two methods will depend on particular practical problem. This test has been found to be useful in comparing the mar resistance of different coatings. It is most useful in providing relative ratings for a series of coated panels exibiting significant differences in mar resistance.
Beschichtungsstoffe - Bestimmung der Kratzfestigkeit - Teil 2: Verfahren mit spitzem Stichel (ISO 12137-2:1997)
1.1 Dieser Teil von ISO 12137 gehört zu einer Reihe von Normen, welche die Probenahme und die Prüfung
von Beschichtungsstoffen, wie Lacke und Anstrichstoffe, behandelt.
Dieser Teil von ISO 12137 legt ein Verfahren zum Bestimmen der Widerstandsfähigkeit einer einzelnen
Schicht aus einem Beschichtungsstoff oder der obersten Schicht eines Mehrschichtsystems gegen Verkratzen
fest, bei dem ein spitzer Stichel angewendet wird. Teil 1 von ISO 12137 legt ein Verfahren mit einem
gebogenen Stichel fest. Welches der beiden Verfahren gewählt wird, hängt von der jeweiligen Fragestellung
ab.
1.2 Diese Prüfung wurde zum Vergleich der Widerstandsfähigkeit unterschiedlicher Beschichtungen gegen
Verkratzen als nützlich befunden. Sie ist besonders geeignet, wenn bei einer Reihe beschichteter
Probenplatten mit deutlich unterschiedlicher Widerstandsfähigkeit gegen Verkratzen relative Einstufungen
erhalten werden sollen.
Peintures et vernis - Détermination de la résistance a la détérioration - Partie 2: Méthode utilisant un stylet pointu (ISO 12137-2:1997)
Barve in laki – Ugotavljanje odpornosti proti praskam – 2. del: Metoda z uporabo ostro ošiljenega praskala (ISO 12137-2:1997)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12137-2:2006
01-oktober-2006
Barve in laki – Ugotavljanje odpornosti proti praskam – 2. del: Metoda z uporabo
ostro ošiljenega praskala (ISO 12137-2:1997)
Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed
stylus (ISO 12137-2:1997)
Beschichtungsstoffe - Bestimmung der Kratzfestigkeit - Teil 2: Verfahren mit spitzem
Stichel (ISO 12137-2:1997)
Peintures et vernis - Détermination de la résistance a la détérioration - Partie 2: Méthode
utilisant un stylet pointu (ISO 12137-2:1997)
Ta slovenski standard je istoveten z: EN ISO 12137-2:2006
ICS:
87.040 Barve in laki Paints and varnishes
SIST EN ISO 12137-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 12137-2:2006
---------------------- Page: 2 ----------------------
SIST EN ISO 12137-2:2006
EUROPEAN STANDARD
EN ISO 12137-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2006
ICS 87.040
English Version
Paints and varnishes - Determination of mar resistance - Part 2:
Method using a pointed stylus (ISO 12137-2:1997)
Peintures et vernis - Détermination de la résistance à la Beschichtungsstoffe - Bestimmung der Kratzfestigkeit - Teil
détérioration - Partie 2: Méthode utilisant un stylet pointu 2: Verfahren mit spitzem Stichel (ISO 12137-2:1997)
(ISO 12137-2:1997)
This European Standard was approved by CEN on 19 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12137-2:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 12137-2:2006
EN ISO 12137-2:2006 (E)
Foreword
The text of ISO 12137-2:1997 has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 12137-2:2006 by Technical Committee CEN/TC 139 "Paints and varnishes", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2006, and conflicting national
standards shall be withdrawn at the latest by December 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 12137-2:1997 has been approved by CEN as EN ISO 12137-2:2006 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 12137-2:2006
INTERNATIONAL
1213712
STANDARD
First edition
1997-02-15
Paints and varnishes - Determination
of mar resistance -
Part 2:
Method using a pointed stylus
- Dhtermination de la rksistance 5 la dktbrioration -
Peinture et vernis
Pat-tie 2: Mkthode utilisant un sty/et pointu
Reference number
IS0 12137-2:1997(E)
---------------------- Page: 5 ----------------------
SIST EN ISO 12137-2:2006
IS0 12137=2:1997(E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide
federation of national standards bodies (IS0 member bodies). The work
of preparing International Standards is normally carried out through IS0
technical committees. Each member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission
(IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies
casting a vote.
International Standard IS0 12137-2 was prepared by Technical
Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 9,
General test methods for paints and varnishes.
IS0 12137 consists of the following parts, under the general title Paints
and varnishes - Determination of mar resistance:
- Part 1: Method using a curved stylus
- Par? 2: Method using a pointed stylus
Annex A forms an integral part of this part of IS0 12137. Annex B is for
information only.
0 IS0 1997
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Internet central @ iso.ch
x.400 c=ch; a=400net; p=iso; o=isocs; s=central
Printed in Switzerland
II
---------------------- Page: 6 ----------------------
SIST EN ISO 12137-2:2006
IS0 12137=2:1997(E)
INTERNATIONAL STANDARD o Iso
Paints and varnishes - Determination of mar resistance -
Part 2:
Method using a pointed stylus
1 Scope
‘,
1 .l This part of IS0 12137 is one of a series of standards dealing with the sampling and testing of paints,
varnishes and related products.
It specifies a method for determining, using a pointed stylus, the mar resistance of a single coating of a paint,
varnish or related product, or the upper layer of a multicoat system. Part 1 of IS0 12137 specifies a method using
a curved stylus. The choice between the two methods will depend on the particular practical problem.
1.2 This test has been found to be useful in comparing the mar resistance of different coatings. It is most useful
in providing relative ratings for a series of coated panels exhibiting significant differences in mar resistance.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this part
of IS0 12137. At the time of publication, the editions indicated were valid. All standards are subject to revision, and
parties to agreements based on this part of IS0 12137 are encouraged to investigate the possibility of applying the
most recent editions of the standards indicated below. Members of IEC and IS0 maintain registers of currently valid
International Standards.
IS0 1512:-l 991, Paints and varnishes - Sampling of products in liquid or paste form.
IS0 1513:1992, Paints and varnishes - Examination and preparation of samples for testing.
IS0 1514:1993, Paints and varnishes - Standard panels for testing.
IS0 2808:-l), Paints and varnishes - Determination of film thickness.
1) To be published. (Revision of IS0 28083 991)
4
---------------------- Page: 7 ----------------------
SIST EN ISO 12137-2:2006
IS0 12137=2:1997(E)
3 Definition
For the purposes of this part of IS0 12137, the following definition applies:
3.1 mar resistance: The resistance of the surface of a paint film to marking or the formation of other defects as
a result of the action of a specified stylus pushed across the surface.
Marring covers a very broad range of defects in the surface of the paint film. These defects include small scratches
and other marks in the surface of the paint film caused by finger nails or car wash brushes, for instance.
The defects are defined as follows:
Plastic deformation - the permanent indentation of the surface with or without any surface blemish or cohesive
a)
fracture.
b) Surface blemish - a superficial surface effect caused by a difference in the scattering of light between the line
of test and the adjacent surface.
c) Surface scratch - a continuous cut or gouge through the surface.
- the presence of a visible surface break or rupture.
d) Cohesive fracture
Combinations of the above.
e)
NOTE - In some cases, one of these types of defect will be of particular importance, while in other cases one of the other
types of defect may be of interest.
4 Principle
The product or system under test is applied at uniform thickness to flat panels of uniform surface texture. After
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.