Unbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression

This document specifies a test method for making cylindrical specimens of hydraulically bound mixtures to a predetermined density and moisture content by axial compression. This document applies to mixtures, or that part of a mixture, containing aggregate up to a maximum size of 22,4 mm, and for mixtures that have sufficient fines or cohesion to allow extrusion without damage immediately after compaction.

Ungebundene und hydraulisch gebundene Gemische - Teil 53: Verfahren zur Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch axialen Druck

Diese Europäische Norm legt das Verfahren fest, nach dem zylindrische Probekörper mit bestimmten, zuvor festgelegten Werten für Dichte und Wassergehalt herzustellen sind. Das Verfahren ist für die Gemische oder den Teil eines Gemisches mit Korngrößen von maximal 22 mm sowie für Gemische mit ausreichendem Feinkorn oder ausreichender ?Kohäsion' geeignet, so dass der Prüfkörper nicht beschädigt wird, wenn er unmittelbar nach dem Verdichten aus der Form entnommen wird.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 53: Méthode de confection par compression axiale des éprouvettes de matériaux traités aux liants hydrauliques

Ce document décrit la méthode de fabrication, par compression axiale, d'éprouvettes cylindriques de masse volumique apparente et de teneur en eau prédéfinies. Cette méthode s'applique aux mélanges ou a la partie d'un mélange contenant des granulats d'une dimension maximale de 22,4 mm, ainsi qu'aux mélanges disposant d'une quantité de fines ou d'une cohésion suffisantes pour permettre une extrusion sans détérioration immédiatement apres le compactage.

Nevezane in hidravlično vezane zmesi – 53. del: Metode (postopki) za izdelavo preskušancev iz hidravlično vezanih zmesi z uporabo osnega zgoščevanja

General Information

Status
Published
Publication Date
31-May-2005
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jun-2005
Due Date
01-Jun-2005
Completion Date
01-Jun-2005

Buy Standard

Standard
EN 13286-53:2005
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.YDQMDUngebundene und hydraulisch gebundene Gemische - Teil 53: Verfahren zur Herstellung von Probekörpern von hydraulisch gebundenen Gemischen durch axialen DruckMélanges traités et mélanges non traités aux liants hydrauliques - Partie 53: Méthode de confection par compression axiale des éprouvettes de matériaux traités aux liants hydrauliquesUnbound and hydraulically bound mixtures - Part 53: Methods for the manufacture of test specimens of hydraulically bound mixtures using axial compression93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-53:2004SIST EN 13286-53:2005en01-junij-2005SIST EN 13286-53:2005SLOVENSKI
STANDARD



SIST EN 13286-53:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-53December 2004ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 53: Methodsfor the manufacture of test specimens of hydraulically boundmixtures using axial compressionMélanges traités et mélanges non traités aux liantshydrauliques - Partie 53: Méthode de confection parcompression axiale des éprouvettes de matériaux traitésaux liants hydrauliquesUngebundene und hydraulisch gebundene Gemische - Teil53: Verfahren zur Herstellung von Probekörpern vonhydraulisch gebundenen Gemischen durch axialen DruckThis European Standard was approved by CEN on 12 November 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-53:2004: ESIST EN 13286-53:2005



EN 13286-53:2004 (E) 2 Contents Page Foreword.3 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Symbols.5 5 Principle.6 6 Dimensions of the specimens.6 7 Apparatus.6 8 Procedure.7 9 Storage.8 10 Test report.8
SIST EN 13286-53:2005



EN 13286-53:2004 (E) 3 Foreword This document (EN 13286-53:2004) has been prepared by Technical Committee CEN/TC 227 “Road materials”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. This document is one of a series of documents as listed below. EN 13286-1, Unbound and hydraulically bound mixtures  Part 1: Test methods for laboratory reference density and water content  Introduction, general requirements and sampling EN 13286-2, Unbound and hydraulically bound mixtures  Part 2: Test methods for the determination of the laboratory reference density and water content  Proctor compaction EN 13286-3, Unbound and hydraulically bound mixtures  Part 3: Test methods for laboratory reference density and water content  Vibrocompression with controlled parameters EN 13286-4, Unbound and hydraulically bound mixtures  Part 4: Test methods for laboratory reference density and water content  Vibrating hammer EN 13286-5, Unbound and hydraulically bound mixtures  Part 5: Test methods for laboratory reference density and water content  Vibrating table EN 13286-7, Unbound and hydraulically bound mixtures  Part 7: Cyclic load triaxial test for unbound mixtures EN 13286-40, Unbound and hydraulically bound mixtures  Part 40: Test method for the determination of the direct tensile strength of hydraulically bound mixtures EN 13286-41, Unbound and hydraulically bound mixtures  Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures EN 13286-42, Unbound and hydraulically bound mixtures  Part 42: Test method for the determination of the indirect tensile strength of hydraulically bound mixtures EN 13286-43, Unbound and hydraulically bound mixtures  Part 43: Test method for the determination of the modulus of elasticity of hydraulically bound mixtures EN 13286-44, Unbound and hydraulically bound mixtures  Part 44: Test method for the determination of the alpha coefficient of vitrified blast furnace slag EN 13286-45, Unbound and hydraulically bound mixtures  Part 45: Test method for the determination of the workability period of hydraulically bound mixtures EN 13286-46, Unbound and hydraulically bound mixtures  Part 46: Test method for the determination of the moisture condition value EN 13286-47, Unbound and hydraulically bound mixtures  Part 47: Test method for the determination of California bearing ratio, immediate bearing index and linear swelling SIST EN 13286-53:2005



EN 13286-53:2004 (E) 4 prEN 13286-48, Unbound and hydraulically bound mixtures  Part 48: Test method for the determination of the degree of pulverisation EN 13286-49, Unbound and hydraulically bound mixtures  Part 49: Accelerated swelling test for soil treated by lime and/or hydraulic binder EN 13286-50, Unbound and hydraulically bound mixtures  Part 50: Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction EN 13286-51, Unbound and hydraulically bound mixtures  Part 51: Method for the manufacture of test specimens of hydraulically bound mixtures
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.