Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 5: Measured and elaborated data publications

CEN/TS 16157-5 specifies and defines component facets supporting the exchange and shared use of data and information in the field of traffic and travel. The component facets include the framework and context for exchanges, the modelling approach, the data content, the data structure and relationships and the communications specification. This Technical Specification is applicable to: - Traffic and travel information which is of relevance to road networks (non urban and urban); - Public transport information that is of direct relevance to the use of a road network (e.g. road link via train or ferry service). This Technical Specification establishes specifications for data exchange between any two instances of the following actors: - Traffic Information Centres (TICs); - Traffic Control Centres (TCCs); - Service Providers (SPs). Use of this Technical Specification may be applicable for use by other actors. This Technical Specification includes the following types of information content: - Road traffic event information - planned and unplanned occurrences both on the road network and in the surrounding environment; - Operator initiated actions; - Road traffic measurement data, status data and travel time data; - Travel information relevant to road users, including weather and environmental information; - Road traffic management information and instructions relating to use of the road network. This part of the CEN/TS 16157 series specifies the informational structures, relationships, roles, attributes and associated data types required for publishing measured and elaborated data within the Datex II framework. This is specified in three submodels, a DATEX II Measurement Site Table Publication submodel, a DATEX II Measured Data Publication submodel and a DATEX II Elaborated Data Publication submodel.

Intelligente Transportsysteme - DATEX II Datenaustausch Spezifikationen für Verkehrsmanagement und Informationen - Teil 5: Gemessene und ausgearbeitete Datenveröffentlichungen

Systèmes de transport intelligents - Spécifications Datex II d'échange de données pour la gestion du trafic et l'information routière - Partie 5 : Publication de données mesurées et de données calculées

Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri upravljanju prometa in informiranju - 5. del: Merjeni in obdelani podatki za objavo

Tehnična specifikacija CEN/TS 16157-5 določa vidike v zvezi s komponentami, ki omogočajo izmenjavo in skupno uporabo podatkov in informacij na področju prometa in potovanj. Vidiki v zvezi s komponentami vključujejo ogrodje in kontekst za izmenjave, pristop z modeliranjem, vsebino podatkov, strukturo podatkov in odnose med njimi ter specifikacijo komunikacije. Ta tehnična specifikacija se uporablja za: - informacije o prometu in potovanju, ki so pomembne za cestna omrežja (na podeželju in v mestih); - informacije o javnem prevozu, ki so neposredno pomembne za uporabo cestnega omrežja (npr. cestna povezava prek železniške ali trajektne storitve). Ta tehnična specifikacija določa specifikacije za izmenjavo podatkov med katerima koli akterjema na naslednjem seznamu: - prometni informacijski centri; - prometni nadzorni centri; - ponudniki storitev. To tehnično specifikacijo lahko uporabijo tudi drugi akterji. Ta tehnična specifikacija vključuje naslednje vrste informacijske vsebine: - informacije o dogajanju v cestnem prometu - načrtovani ali nenačrtovani dogodki na cestnem omrežju in v njegovi okolici; - dejanja, ki jih izvedejo izvajalci; - podatki o merjenju cestnega prometa, podatki o stanju in času potovanja; - podatki o potovanju, ki so pomembni za uporabnike cest, vključno z informacijami o vremenu in okolju; - informacije o upravljanju cestnega prometa in navodila za uporabo cestnega omrežja. Ta del iz skupine tehničnih specifikacij CEN/TS 16157 določa strukture informacij, odnose, vloge, parametre in z njimi povezane podatkovne tipe, ki so potrebni za objavo merjenih in obdelanih podatkov v okviru Datex II. To je določeno v treh podmodelih: podmodelu DATEX II za objave tabel na merilnem mestu, podmodelu DATEX II za objave merjenih podatkov in podmodelu DATEX II za objave obdelanih podatkov.

General Information

Status
Withdrawn
Publication Date
03-Aug-2014
Withdrawal Date
07-Sep-2020
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
08-Sep-2020
Due Date
01-Oct-2020
Completion Date
08-Sep-2020

RELATIONS

Buy Standard

Technical specification
SIST-TS CEN/TS 16157-5:2014
English language
161 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST-TS CEN/TS 16157-5:2014
01-september-2014

Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri

upravljanju prometa in informiranju - 5. del: Merjeni in obdelani podatki za objavo

Intelligent transport systems - DATEX II data exchange specifications for traffic

management and information - Part 5: Measured and elaborated data publications
Intelligente Transportsysteme - DATEX II Datenaustausch Spezifikationen für
Verkehrsmanagement und Informationen - Teil 5: Gemessene und ausgearbeitete
Datenveröffentlichungen

Systèmes de transport intelligents - Spécifications Datex II d'échange de données pour

la gestion du trafic et l'information routière - Partie 5 : Publication de données mesurées

et de données calculées
Ta slovenski standard je istoveten z: CEN/TS 16157-5:2014
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN/TS 16157-5:2014 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16157-5:2014
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16157-5:2014
TECHNICAL SPECIFICATION
CEN/TS 16157-5
SPÉCIFICATION TECHNIQUE
TECHNISCHE SPEZIFIKATION
April 2014
ICS 35.240.60
English Version
Intelligent transport systems - DATEX II data exchange
specifications for traffic management and information - Part 5:
Measured and elaborated data publications

Systèmes de transport intelligents - Spécifications Datex II Intelligente Transportsysteme - DATEX II Datenaustausch

d'échange de données pour la gestion du trafic et Spezifikationen für Verkehrsmanagement und

l'information routière - Partie 5 : Publication de données Informationen - Teil 5: Gemessene und ausgearbeitete

mesurées et de données calculées Datenveröffentlichungen

This Technical Specification (CEN/TS) was approved by CEN on 27 January 2014 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their

comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available

promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)

until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16157-5:2014 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
Contents Page

Foreword ..............................................................................................................................................................4

Introduction .........................................................................................................................................................5

1 Scope ......................................................................................................................................................6

1.1 Conformance ..........................................................................................................................................6

2 Normative references ............................................................................................................................7

3 Terms and definitions ...........................................................................................................................7

4 Symbols and abbreviated terms ..........................................................................................................8

5 UML notation ..........................................................................................................................................8

6 The Measurement Site Table Publication model ................................................................................8

6.1 Overview of the Measurement Site Table Publication model ...........................................................8

6.2 The “MeasurementSiteTablePublication” Package ...........................................................................8

7 The Measured Data Publication model ............................................................................................. 11

7.1 Overview of the Measured Data Publication model ........................................................................ 11

7.2 The “MeasuredDataPublication” Package ....................................................................................... 11

7.3 The “BasicData” Package .................................................................................................................. 14

7.4 The “TrafficStatus” Package ............................................................................................................. 16

7.5 The “TravelTimeData” Package ........................................................................................................ 18

7.6 The “TrafficData” Package ................................................................................................................ 19

7.7 The “TrafficHeadway” Package ......................................................................................................... 21

7.8 The “TrafficFlow” Package ................................................................................................................ 23

7.9 The “TrafficSpeed” Package ............................................................................................................. 24

7.10 The “TrafficConcentration” Package ................................................................................................ 26

7.11 The “IndividualDataValues” Package ............................................................................................... 27

7.12 The “WeatherData” Package ............................................................................................................. 29

7.13 The “Humidity” Package .................................................................................................................... 32

7.14 The “Visibility” Package .................................................................................................................... 33

7.15 The “Pollution” Package .................................................................................................................... 34

7.16 The “PrecipitationDetail” Package.................................................................................................... 35

7.17 The “RoadsurfaceConditionMeasurements” Package ................................................................... 36

7.18 The “Temperature” Package ............................................................................................................. 38

7.19 The “Wind” Package .......................................................................................................................... 39

8 The Elaborated Data Publication model ........................................................................................... 41

8.1 Overview of the Elaborated Data Publication model ...................................................................... 41

8.2 The “ElaboratedDataPublication” Package ..................................................................................... 41

8.3 The “ElaboratedData” Package ......................................................................................................... 43

8.4 The “Validity” Package ...................................................................................................................... 45

8.5 The “BasicData” Package .................................................................................................................. 45

Annex A (normative) Data Dictionary............................................................................................................. 46

A.2 Data Dictionary for “Measurement Site Table Publication” ........................................................... 47

A.3 Data Dictionary of < < datatypes > > for “Measurement Site Table Publication” ...................... 49

A.4 Data Dictionary of < < enumerations > > for “Measurement Site Table Publication” ............... 49

A.5 Data Dictionary for “Measured Data Publication” ........................................................................... 51

A.6 Data Dictionary of < < datatypes > > for “Measured Data Publication” ...................................... 66

A.7 Data Dictionary of < < enumerations > > for “Measured Data Publication” ............................... 66

A.8 Data Dictionary for “Elaborated Data Publication” ......................................................................... 71

A.9 Data Dictionary of < < datatypes > > for “Elaborated Data Publication” .................................... 74

---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)

Annex B (normative) Referenced XML Schema for “MeasurementSiteTablePublication” ....................... 75

B.1 Overview ............................................................................................................................................... 75

B.2 Schema ................................................................................................................................................. 75

Annex C (normative) Referenced XML Schema for “MeasuredDataPublication” ...................................... 88

C.1 Overview ............................................................................................................................................... 88

C.2 Schema ................................................................................................................................................. 88

Annex D (normative) Referenced XML Schema for “ElaboratedDataPublication” .................................. 118

D.1 Overview ............................................................................................................................................. 118

D.2 Schema ............................................................................................................................................... 118

Annex E (informative) Examples of Measurement Site Table Publications, Measured Data

Publications and Elaborated Data Publications in XML ................................................................ 151

E.1 Example of Measurement Site Table Publication .......................................................................... 151

E.2 Example of Measured Data Publication .......................................................................................... 154

E.3 Example of Elaborated Data Publication ........................................................................................ 159

Bibliography .................................................................................................................................................... 161

---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
Foreword

This document (CEN/TS 16157-5:2014) has been prepared by Technical Committee CEN/TC 278 “Intelligent

transport systems”, the secretariat of which is held by NEN.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

The CEN/TS 16157 series consists of the following parts, under the general title “Intelligent transport systems

— DATEX II data exchange specifications for traffic management and information”:
- Part 1: Context and framework
- Part 2: Location referencing
- Part 3: Situation publication
- Part 4: VMS publication
- Part 5: Measured and Elaborated Data Publications
Other parts may be developed in the future.

As a user of the standard, attention is drawn to the resources of www.datex2.eu < http://www.datex2.eu/ > .

This website contains related software tools and software resources that aid the implementation of the

CEN/TS 16157 series DATEX II.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,

Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,

Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,

Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
Introduction

This Technical Specification defines a common set of data exchange specifications to support the vision of a

seamless interoperable exchange of traffic and travel information across boundaries, including national,

urban, interurban, road administrations, infrastructure providers and service providers. Standardization in this

context is a vital constituent to ensure that interoperability, reduction of risk, reduction of the cost base and

promotion of open marketplace objectives are achieved that will lead to many social, economic and

community benefits as a result of more informed travellers, network managers and transport operators.

Delivering European Transport Policy in line with the White Paper issued by the European Commission

requires co-ordination of traffic management and the development of seamless pan European services. With

the aim to support sustainable mobility in Europe, the European Commission has been supporting the

development of information exchange mainly between the actors of the road traffic management domain for a

number of years. In the road sector, DATEX II has been long in fruition, with the European Commission being

fundamental to its development through an initial contract and subsequent co-funding through the Euro-

Regional projects. With this standardization of DATEX II there is a real basis for common exchange between

the actors of the traffic and travel information sector.

This Technical Specification includes the framework and context for exchanges, the modelling approach, data

content, data structure and relationships and communications specification.
This Technical Specification supports a methodology that is extensible.

The fifth part of this Technical Specification deals with the one or more publication sub-model(s) within the

DATEX II model that support the exchange of measured and elaborated information. These publications are

intended to support the exchange of information from the organization having the measures and creating

elaborated data to other organizations providing ITS services or onward information exchange. It also includes

the exchange of static information about measurement sites.

The European Committee for Standardization (CEN) draws attention to the fact that it is claimed that

compliance with this document may involve the use of a patent concerning procedures, methods and/or

formats given in this document.

CEN takes no position concerning the evidence, validity and scope of patent rights.

---------------------- Page: 7 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
1 Scope

This Technical Specification (CEN/TS 16157-5) specifies and defines component facets supporting the

exchange and shared use of data and information in the field of traffic and travel.

The component facets include the framework and context for exchanges, the modelling approach, the data

content, the data structure and relationships and the communications specification.

This Technical Specification is applicable to:

— Traffic and travel information which is of relevance to road networks (non urban and urban);

— Public transport information that is of direct relevance to the use of a road network (e.g. road link via train

or ferry service).

This Technical Specification establishes specifications for data exchange between any two instances of the

following actors:
— Traffic Information Centres (TICs);
— Traffic Control Centres (TCCs);
— Service Providers (SPs).
Use of this Technical Specification may be applicable for use by other actors.

This Technical Specification includes the following types of information content:

— Road traffic event information – planned and unplanned occurrences both on the road network and in the

surrounding environment;
— Operator initiated actions;
— Road traffic measurement data, status data and travel time data;

— Travel information relevant to road users, including weather and environmental information;

— Road traffic management information and instructions relating to use of the road network.

This part of the CEN/TS 16157 series specifies the informational structures, relationships, roles, attributes and

associated data types required for publishing measured and elaborated data within the Datex II framework.

This is specified in three submodels, a DATEX II Measurement Site Table Publication submodel, a DATEX II

Measured Data Publication submodel and a DATEX II Elaborated Data Publication submodel.

1.1 Conformance

The platform independent sub-models defined by this Part specify a DATEX II Measurement Site

Table Publication, a DATEX II Measured Data Publication and a DATEX II Elaborated Data Publication except

for those elements that relate to location information which are specified in CEN/TS 16157-2. The DATEX II

platform independent data model these three publication sub-models are a part of which, corresponds to the

Level A model as defined in CEN/TS 16157-1.

Conformance with this Part shall require platform independent models from which platform specific models are

generated to comply with the UML modelling rules defined in CEN/TS 16157-1 and with the following

requirements of the sub-models which are expressed in this Part:
---------------------- Page: 8 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)

— comply with all stipulated minimum and maximum multiplicity requirements for UML elements and

relationships;
— comply with all definitions, types and ordering;
— employ optional elements as specified;
— comply with all expressed constraints.

It should be noted that conformance of a publication service with all the structural requirements stated above

does not necessarily ensure that the informational content of that service will be semantically comprehensible.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated

references, only the edition cited applies. For undated references, the latest edition of the referenced

document (including any amendments) applies.

CEN/TS 16157-1:2011, Intelligent transport systems - DATEX II data exchange specifications for traffic

management and information - Part 1: Context and framework

CEN/TS 16157-2:2011, Intelligent transport systems - DATEX II data exchange specifications for traffic

management and information - Part 2: Location referencing

CEN/TS 16157-3:2011, Intelligent transport systems - DATEX II data exchange specifications for traffic

management and information - Part 3: Situation Publication

ISO/IEC 19501:2005, Information technology — Open Distributed Processing — Unified Modeling Language

(UML) Version 1.4.2
3 Terms and definitions

For the purposes of this document, the terms and definitions given in CEN/TS 16157-1, CEN/TS 16157-2,

CEN/TS 16157-3 and in the following list shall apply.
3.1
elaborated data

data which is derived/computed from one or more measurements over a period of time

Note 1 to entry: It may be a current value or a forecast value predicted from historical measurements.

3.2
measured data

quantitative data measured against a quantified scale (possibly using standard units of measure)

Note 1 to entry: In comparison to Elaborated Data, measured data can be considered to represent presentation of

more directly observed measurements
3.3
measurement
collection of quantitative data

Note 1 to entry: A measurement is made by comparing a quantity with a standard unit. Since this comparison cannot

be perfect, measurements inherently include error.
---------------------- Page: 9 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
3.4
measurement site
location from where a stream of measured data may be derived

Note 1 to entry: It can be a point, a linear road section or an area. Linear sections may even be specified as itineraries

or predefined location sets, e.g. for travel time routes which comprise one or more different roads.

3.5
Site Measurements
A measurement data set derived from a specific measurement site
4 Symbols and abbreviated terms

For the purposes of this document, the abbreviation of terms given in CEN/TS 16157-1, CEN/TS 16157-2,

CEN/TS 16157-3 and in the following list shall apply.
PCU Passenger Car Unit
5 UML notation

The UML notation used in these Technical Specifications shall be as described in ISO/IEC 19501. A short

summary explaining the notation used in this part of the CEN/TS 16157 series is provided in Annex A of

CEN/TS 16157-1.
6 The Measurement Site Table Publication model
6.1 Overview of the Measurement Site Table Publication model
The Measurement Site Table Publication model comprises a top-level package,

“MeasurementSiteTablePublication” which utilizes some classes from the “ReusableClasses” package and the

“GroupOfLocations” package. This package is one of a number which are immediately subordinate to the

“PayloadPublication” package and hence forms the top of the hierarchy in the Measurement Site

Table Publication sub-model.

The “MeasurementSiteTablePublication” package models Measurement Site Tables comprising a number of

sets of data, each describing the location from where a stream of measured data may be derived. Each

location is known as a “measurement site” which can be a point, a linear road section or an area.

Each “MeasurementSiteTablePublication” instance shall contain one or more instances of a

“MeasurementSiteTable”, each table containing a number of “MeasurementSiteRecords”. Each

“MeasurementSiteRecord” shall be described by a location and specific characteristics.

Each “MeasurementSite” instance contains zero or more “Measurements” that have different characteristics

like e.g. traffic flow, speed,…
6.2 The “MeasurementSiteTablePublication” Package
6.2.1 Overview of the “MeasurementSiteTablePublication” Package

The “MeasurementSiteTablePublication” package shall comprise a sub-model for defining publishable

measurement site tables which comprise records defining the measurement sites (see Figure 1). Each

publication may contain one or more tables, allowing logical partitioning of measurement sites information as

deemed most appropriate for recipients of measured data information by the supplier (e.g. by road designation

or other geographic criteria or by type of measurement site, etc.)
---------------------- Page: 10 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
Figure 1 — The “MeasurementSiteTablePublication” package class model
9
---------------------- Page: 11 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
6.2.2 Semantics of the “MeasurementSiteTablePublication” Package
6.2.2.1 “MeasurementSiteTablePublication” package semantics - general

The “MeasurementSiteTablePublication” class is a specific realizable case of a “PayloadPublication”. Each “MeasurementSiteTablePublication” may

contain any number of separate measurement site tables.
6.2.2.2 “MeasurementSiteTablePublication” Class

The “MeasurementSiteTablePublication” class is the base class for containing the published measurement site tables.

6.2.2.3 “HeaderInformation” Class

Each instance of a “MeasurementSiteTablePublication” shall have associated metadata contained in an instance of the “HeaderInformation” class which

allows the supplier of the “MeasurementSiteTablePublication” to specify how the recipient should treat the information contained in it. This class is already

defined in CEN/TS 16157-3.
6.2.2.4 “MeasurementSiteTable” Class

An identifiable versioned instance of the “MeasurementSiteTable” class shall contain any logical collection of “MeasurementSiteRecords”.

6.2.2.5 “MeasurementSiteRecord” Class

An identifiable versioned instance of the “MeasurementSiteRecord” class shall contain the characteristics information relating to a specific Measurement

Site.

Each record shall be located by a “GroupOfLocations” class. This class belongs to the “GroupOfLocations” package already described in CEN/TS 16157-2.

Each record shall have one indexed “MeasurementSpecificCharacteristics” sub-record for containing the characteristics of each individual measure. The

index provides the means for a measured value (in the MeasuredDataPublication) to be referenced to the relevant MeasurementSpecificCharacteristics at

the measurement site. Each measure can concern specific vehicles which are described by a “VehicleCharacteristics” class.

6.2.2.6 “MeasurementSpecificCharacteristics” Class

An instance of the “MeasurementSpecificCharacteristics” class contains characteristics which are specific to an individual measurement type (specified in a

known order) at the given measurement site.
---------------------- Page: 12 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
6.2.2.7 “VehicleCharacteristics” Class

The characteristics of a vehicle, e.g. lorry of gross weight greater than 30 tonnes.

The “VehicleCharacteristics” class is defined in the “VehicleCharacteristics” package which is already described in CEN/TS 16157-3.

7 The Measured Data Publication model
7.1 Overview of the Measured Data Publication model

The Measured Data Publication model shall comprise a top-level package, “MeasuredDataPublication” and one sub-package “BasicData” from the

“ReusableClasses” package. The “MeasuredDataPublication” top-level package shall be one of a number which shall be immediately subordinate to the

“PayloadPublication” package and hence shall form the top of the hierarchy in the Measured Data Publication model.

7.2 The “MeasuredDataPublication” Package
7.2.1 Overview of the “MeasuredDataPublication” Package

The “MeasuredDataPublication” package shall comprise the sub-model for defining a publication containing one or more measurement data sets, each set

being composed of a number of measure values measured at a single measurement site.

11
---------------------- Page: 13 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
Figure 2 — The “MeasuredDataPublication” package class model
---------------------- Page: 14 ----------------------
SIST-TS CEN/TS 16157-5:2014
CEN/TS 16157-5:2014 (E)
7.2.2 Semantics of the “MeasuredDataPublication” Package
7.2.2.1 “MeasuredDataPublication” package semantics - general

The “MeasuredDataPublication” class shall be the only entry point of the package and shall be a specific realizable case of a “PayloadPublication”. Each

“MeasuredDataPublication” shall contain one or more measurement data sets, each set being measured at a single measurement site.

7.2.2.2 “MeasuredDataPublication” Class

The “MeasuredDataPublication” class shall be the base class for containing the published measured data.

7.2.2.3 “HeaderInformation” Class

Each instance of a “MeasuredDataPublication” shall have associated metadata contained in an instance of the “HeaderInformation” class which shall allow

the supplier of the publication to specify how the recipient of the “MeasuredDataPublication” should treat the information contained in it. This class is

already defined in CEN/TS 16157-3.
7.2.2.4 “SiteMeasurements” Class

The “SiteMeasurements” class shall contain a measurement data set derived from a specific measurement site.

Each measurement site, at a given time, has an indexed “MeasurementValue”. The “index” qualifier provides a reference to the specific

MeasurementCharacteristics that are relevant for the MeasuredValue at the referenced measurement site.

7.2.2.5 “MeasuredValue” Class

The “MeasuredValue” class contains optional characteristics for the specific measured value (indexed to correspond with the defined characteristics of the

measurement at the referenced measurement site) which override the static characteristics defined in the MeasurementSiteTable.

7.2.2.6 “LocationCharacteristi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.