SIST EN 301 489-17 V2.2.1:2012
(Main)Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment - Part 17: Specific conditions for Broadband Data Transmission Systems
Electromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment - Part 17: Specific conditions for Broadband Data Transmission Systems
The present document, together with EN 301 489-1 [1], covers the assessment of Broadband Data Transmission System equipment, as detailed in annex A, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for wideband data communication systems. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present
document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document.
Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo - 17. del: Posebni pogoji za širokopasovne sisteme za prenos podatkov
V zvezi z elektromagnetno združljivostjo (EMC) ta dokument skupaj s standardom EN 301 489-1 [1] zajema oceno opreme za širokopasovni sistem za prenos podatkov, kot je podrobno določena v dodatku A. Ta dokument ne vključuje tehničnih specifikacij v zvezi z antenskih vhodom in sevanjem iz vhoda na ohišju radijske opreme. Take tehnične specifikacije so navedene v ustreznih standardih za izdelek na področju učinkovite uporabe radijskega spektra. Dokument določa veljavne preskusne pogoje, oceno zmogljivosti in merila zmogljivosti za širokopasovne podatkovne komunikacijske sisteme. V primeru razlik (na primer v zvezi s posebnimi pogoji, definicijami, okrajšavami) med tem
dokumentom in standardom EN 301 489-1 [1] imajo prednost določbe iz tega dokumenta. Okoljska razvrstitev ter zahteve glede sevanja in odpornosti iz tega dokumenta so določene v standardu EN 301 489-1 [1], razen kakršnih koli posebnih pogojev iz tega dokumenta.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) - Standard elektromagnetne združljivosti (EMC) za radijsko opremo - 17. del: Posebni pogoji za širokopasovne sisteme za prenos podatkovElectromagnetic compatibility and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment - Part 17: Specific conditions for Broadband Data Transmission Systems33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general33.060.01Radijske komunikacije na splošnoRadiocommunications in generalICS:Ta slovenski standard je istoveten z:EN 301 489-17 Version 2.2.1SIST EN 301 489-17 V2.2.1:2012en01-oktober-2012SIST EN 301 489-17 V2.2.1:2012SLOVENSKI
STANDARD
SIST EN 301 489-17 V2.2.1:2012
ETSI EN 301 489-17 V2.2.1 (2012-09) Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission Systems
Harmonized European Standard SIST EN 301 489-17 V2.2.1:2012
ETSI ETSI EN 301 489-17 V2.2.1 (2012-09)2
Reference REN/ERM-EMC-311 Keywords EMC, radio ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00
Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C Association à but non lucratif enregistrée à la Sous-Préfecture de Grasse (06) N° 7803/88
Important notice Individual copies of the present document can be downloaded from: http://www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http://portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http://portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2012. All rights reserved.
DECTTM, PLUGTESTSTM, UMTSTM and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association. SIST EN 301 489-17 V2.2.1:2012
ETSI ETSI EN 301 489-17 V2.2.1 (2012-09)3 Contents Intellectual Property Rights . 5 Foreword . 5 Introduction . 5 1 Scope . 6 2 References . 6 2.1 Normative references . 6 2.2 Informative references . 6 3 Definitions and abbreviations . 7 3.1 Definitions . 7 3.2 Abbreviations . 8 4 Test conditions . 8 4.1 General . 8 4.2 Arrangements for test signals . 8 4.2.1 Arrangements for test signals at the input of transmitters . 8 4.2.2 Arrangements for test signals at the output of transmitters . 8 4.2.3 Arrangements for test signals at the input of receivers . 9 4.2.4 Arrangements for test signals at the output of receivers . 9 4.2.5 Arrangements for testing transmitter and receiver together (as a system) . 9 4.3 Exclusion bands . 9 4.4 Narrow band responses on receivers or receivers which are part of transceivers . 10 4.5 Normal test modulation . 10 5 Performance assessment . 10 5.1 General . 10 5.2 Arrangements for the assessment of host dependant equipment and plug-in cards . 10 5.2.1 Alternative A: composite equipment . 10 5.2.2 Alternative B: use of a test jig or host . 11 5.3 Assessment procedures . 11 5.4 Ancillary equipment . 11 5.5 Equipment classification . 11 6 Performance criteria . 11 6.1 General performance criteria . 11 6.2 Performance table . 12 6.3 Performance criteria for Continuous phenomena applied to Transmitters (CT) . 12 6.4 Performance criteria for Transient phenomena applied to Transmitters (TT) . 12 6.5 Performance criteria for Continuous phenomena applied to Receivers (CR) . 13 6.6 Performance criteria for Transient phenomena applied to Receivers (TR) . 13 7 Applicability overview . 13 7.1 Emission . 13 7.1.1 General . 13 7.1.2 Special conditions . 13 7.2 Immunity . 13 7.2.1 General . 13 7.2.2 Special conditions . 13 Annex A (informative): Examples of radio equipment in the scope of the present document . 14 A.1 Data transmission systems operating in the 2,4 GHz ISM band and using wide band modulation techniques . 14 A.2 5 GHz high performance RLAN systems . 14 A.3 Broadband data transmitting systems operating in the band 5 725 MHz to 5 875 MHz . 14 SIST EN 301 489-17 V2.2.1:2012
ETSI ETSI EN 301 489-17 V2.2.1 (2012-09)4 A.4 Broadband data transmitting/BWA Terminal Stations . 14 A.5 Multi-Gigabit Wireless Systems (MGWS) . 14 Annex B (informative): Bibliography . 15 History . 16
SIST EN 301 489-17 V2.2.1:2012
ETSI ETSI EN 301 489-17 V2.2.1 (2012-09)5 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http://ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonized European Standard (EN) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio spectrum Matters (ERM). The present document has been produced by ETSI in response to a mandate from the European Commission issued under Directive 98/34/EC [i.2] as amended by Directive 98/48 [i.12]. The title and reference to the present document are intended to be included in the publication in the Official Journal of the European Union of titles and references of Harmonized Standard under the Directive 1999/5/EC [i.1]. See article 5.1 of Directive 1999/5/EC [i.1] for information on presumption of conformity and Harmonised Standards or parts thereof the references of which have been published in the Official Journal of the European Union. The present document is part 17 of a multi-part deliverable. Full details of the entire series can be found in part 1 [1].
National transposition dates Date of adoption of this EN: 14 August 2012 Date of latest announcement of this EN (doa): 30 November 2012 Date of latest publication of new National Standard or endorsement of this EN (dop/e):
31 May 2013 Date of withdrawal of any conflicting National Standard (dow): 31 May 2014
Introduction The present document is part of a set of standards developed by ETSI and is designed to fit in a modular structure to cover all radio and telecommunications terminal equipment within the scope of the R&TTE Directive [i.1]. The modular structure is shown in EG 201 399 [i.9]. SIST EN 301 489-17 V2.2.1:2012
ETSI ETSI EN 301 489-17 V2.2.1 (2012-09)6 1 Scope The present document, together with EN 301 489-1 [1], covers the assessment of Broadband Data Transmission System equipment, as detailed in annex A, in respect of ElectroMagnetic Compatibility (EMC). Technical specifications related to the antenna port and emissions from the enclosure port of the radio equipment are not included in the present document. Such technical specifications are found in the relevant product standards for the effective use of the radio spectrum. The present document specifies the applicable test conditions, performance assessment and performance criteria for wideband data communication systems. In case of differences (for instance concerning special conditions, definitions, abbreviations) between the present document and EN 301 489-1 [1], the provisions of the present document take precedence. The environmental classification and the emission and immunity requirements used in the present document are as stated in EN 301 489-1 [1], except for any special conditions included in the present document. 2 References References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http://docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of the present document. [1] ETSI EN 301 489-1 (V.1.8.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements". 2.2 Informative references The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. [i.1] Directive 1999/5/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R&TTE Directive). [i.2] Directive 98/34/EC of the European Parliament and of the Council of 22 June 1998 laying down a procedure for the provision of information in the field of technical standards and regulations. [i.3] ETSI EN 301 893: "Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.4] ETSI EN 302 502: "Broadband Radio Access Networks (BRAN); 5,8 GHz fixed broadband data transmitting systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". SIST EN 301 489-17 V2.2.1:2012
ETSI ETSI EN 301 489-17 V2.2.1 (2012-09)7 [i.5] ETSI EN 302 544-2: "Broadband Data Transmission Systems operating in the 2 500 MHz to 2 690 MHz frequency band; Part 2: TDD User Equipment Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.6] ETSI EN 302 567: "Broadband Radio Access Networks (BRAN); 60 GHz Multiple-Gigabit WAS/RLAN Systems; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.7] ETSI EN 302 623: "Broadband Wireless Access Systems (BWA) in the 3 400 MHz to 3 800 MHz frequency band; Mobile Terminal Stations; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.8] ETSI EN 300 328: "Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive". [i.9] ETSI EG 201 399: "Electromagnetic compatibility and Radio spectrum Matters (ERM); A guide to the production of Harmonized Standards for application under the R&TTE Directive". [i.10] ETSI EN 301 908-19: "IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 19: OFDMA TDD WMAN (Mobile WiMAX) TDD User Equipment (UE)". [i.11] ETSI EN 301 908-21: "IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 21: OFDMA TDD WMAN (Mobile WiMAX) FDD User Equipment (UE)". [i.12] Directive 98/48/EC of the European Parliament and of the Council of 20 July 1998 amending Directive 98/34/EC laying down a procedure for the provision of information in the field of technical standards and regulations. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in EN 301 489-1 [1] and the following apply: Equipment Un
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.