Graphic technology -- Safety requirements for printing press systems

ISO 12648:2002 applies to printing press systems, including auxiliary equipment and finishing machines, in which all the machine actuators (e.g. drives) of the equipment in the system are controlled by the same control system.
It is applicable only to systems in which a printing press is part of the system. In cases where a binding/finishing system is not integrated with a printing press, ISO 12649 will apply.
ISO 12648:2002 provides safety requirements for the design and construction of the classes of machines listed in Clause 2. It addresses recognized hazards specific to printing press systems in the following areas:
mechanical;
electrical;
slipping, tripping, falling;
ergonomics;
noise;
radiation;
fire and explosion;
thermal;
emissions.
ISO 12648:2002 applies to new machines (see Clause 2) manufactured after December 31 of the year following the year of publication of this standard.

Technologie graphique -- Exigences de sécurité pour systèmes de presses d'impression

Grafična tehnologija – Varnostne zahteve za sisteme tiskarskih strojev

General Information

Status
Withdrawn
Publication Date
31-Dec-2004
Withdrawal Date
31-Aug-2006
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2006
Due Date
01-Sep-2006
Completion Date
01-Sep-2006

Relations

Buy Standard

Standard
ISO 12648:2003 - Graphic technology -- Safety requirements for printing press systems
English language
91 pages
sale 15% off
Preview
sale 15% off
Preview
Standard
ISO 12648:2005
English language
91 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

INTERNATIONAL ISO
STANDARD 12648
First edition
2003-04-01

Graphic technology — Safety
requirements for printing press systems
Technologie graphique — Exigences de sécurité pour systèmes de
presses d'impression




Reference number
ISO 12648:2003(E)
©
ISO 2003

---------------------- Page: 1 ----------------------
ISO 12648:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 2 ----------------------
ISO 12648:2003(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope. 1
2 Classifications. 1
2.1 Machines for producing printing by various processes. 1
2.2 Auxiliary equipment. 2
3 Normative references . 2
4 Terms and definitions. 4
5 Guarding of significant hazards . 13
5.1 Guards. 13
5.2 In-running (in-going) nips . 15
5.3 Guarding in-running nips. 16
5.4 Interlocks . 19
5.5 Hold-to-run controls . 21
5.6 Automatic format setting operations . 23
5.7 Other safeguarding measures . 23
5.8 Guarding of machine devices and components. 24
6 Requirements for protection against other hazards . 35
6.1 Fire and explosion . 35
6.2 Spillage from washing devices. 39
6.3 Electrical equipment . 40
6.4 Working platforms, access stairs, passageways and raised workplaces . 40
6.5 Stability . 43
6.6 High contact temperatures. 44
6.7 Noise. 44
6.8 Electrostatic toner dust. 45
6.9 Radiation hazards . 45
6.10 Stationary knives . 46
6.11 Rotary tools . 46
6.12 Hazardous tools . 46
6.13 Protruding machine parts . 47
6.14 Handwheels and cranks . 47
6.15 Washing equipment . 47
6.16 Alcohol dosing devices. 47
6.17 Refrigerating devices in ink and dampening units. 48
6.18 Powder spraying devices. 48
6.19 Routine handling of heavy machine parts. 48
6.20 Oxidizers, incinerators or thermal cleaning plants . 48
7 Release from hazardous situation . 49
8 Control zones . 49
9 Controls. 50
9.1 Manual control devices . 50
9.2 Initiating machine motion. 58
9.3 Hold-to-run controls . 59
9.4 Two-hand controls . 59
9.5 Electro-sensitive protective devices. 60
9.6 Pressure-sensitive mats, pressure-sensitive bumpers, trip devices . 60
© ISO 2003 — All rights reserved iii

---------------------- Page: 3 ----------------------
ISO 12648:2003(E)
9.7 Braking devices, clutches .61
10 Control stations.61
10.1 Location of operator control stations .62
10.2 Operator control station orientation.62
10.3 Typical operator control stations .62
10.4 Motion control stations.62
11 Control systems .66
11.1 General requirements .66
11.2 Additional requirements for hand-fed machines where the operator's hands enter the
point of operation.67
11.3 Control systems for screen printing presses.68
12 Ergonomics and labelling of indicators and actuators .68
13 Signals and warning devices .68
13.1 Audible warning system .69
13.2 Area light warning system.72
14 Warning signs and labels .72
15 Information for use.73
15.1 Minimum requirements for machine markings .73
15.2 Contents of instruction handbook.74
Annex A (informative) Hazards on printing press systems.78
Annex B (normative) Explosion protection zones .81
Annex C (informative) Risk analysis relating to the pitch angle of access stairs.84
Annex D (informative) Example of layout of instruction handbooks .86
Annex E (normative) Area warning light system.88
Bibliography.90

iv © ISO 2003 — All rights reserved

---------------------- Page: 4 ----------------------
ISO 12648:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12648 was prepared by Technical Committee ISO/TC 130, Graphic technology.
© ISO 2003 — All rights reserved v

---------------------- Page: 5 ----------------------
ISO 12648:2003(E)
Introduction
During the development of this International Standard, existing relevant standards of other countries were
taken into consideration. An effort has been made to harmonize the requirements of all countries, recognizing
that national standards or laws may dictate national requirements. In cases where it was known that there is a
national requirement that differs from this International Standard, that has been noted.
This International Standard has taken into consideration material contained in ANSI B65.1-1995 Safety
standard — Printing press systems, prEN 1010-1, Technical safety requirements for the design and
construction of printing and paper converting machines — Part 1: Common requirements, and prEN 1010-2,
Technical safety requirements for the design and construction of printing and paper converting machines —
Part 2: Printing and varnishing machines including pre-press machinery.

vi © ISO 2003 — All rights reserved

---------------------- Page: 6 ----------------------
INTERNATIONAL STANDARD ISO 12648:2003(E)

Graphic technology — Safety requirements for printing press
systems
1 Scope
This International Standard applies to printing press systems, including auxiliary equipment and finishing
machines, in which all the machine actuators (e.g. drives) of the equipment in the system are controlled by the
same control system.
It is applicable only to systems in which a printing press is part of the system. In cases where a
binding/finishing system is not integrated with a printing press, ISO 12649 will apply.
This International Standard provides safety requirements for the design and construction of the classes of
machines listed in Clause 2. It addresses recognized hazards specific to printing press systems in the
following areas:
 mechanical;
 electrical;
 slipping, tripping, falling;
 ergonomics;
 noise;
 radiation;
 fire and explosion;
 thermal;
 emissions.
This International Standard applies to new machines (see Clause 2) manufactured after December 31 of the
year following the year of publication of this International Standard.
2 Classifications
2.1 Machines for producing printing by various processes
 relief (letterpress, flexographic);
 offset (lithographic);
 gravure (rotogravure, intaglio);
 screen printing;
 digital presses (electrostatic, ink jet, thermal, airbrush, etc.).
© ISO 2003 — All rights reserved 1

---------------------- Page: 7 ----------------------
ISO 12648:2003(E)
2.2 Auxiliary equipment
 washing equipment for cylinders and rollers;
 powder spraying devices;
 alcohol dosing devices;
 imprinting/addressing/numbering equipment;
 automatic plate clamping devices, automatic pile handling equipment;
 washing equipment;
 inserting machines;
 pile turners, reel turners, elevators;
 dryers/pollution control;
 radiation equipment;
 in-line processing and finishing equipment;
 stackers;
 palletizers;
 bundlers;
 coaters;
 chilling systems;
 electrostatic equipment;
 humidifiers;
 accumulating or piling-off devices;
 conveyors;
 unwinding, rewinding, reel transport devices.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 8031, Rubber and plastics hoses and hose assemblies — Determination of electrical resistance
ISO 11553, Safety of machinery — Laser processing machines — Safety requirements
ISO/TR 11688-1, Acoustics — Recommended practice for the design of low-noise machinery and
equipment — Part 1: Planning
ISO 12100-1, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology, methodology
2 © ISO 2003 — All rights reserved

---------------------- Page: 8 ----------------------
ISO 12648:2003(E)
ISO 12100-2, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical
principles
ISO 13849-1:1999, Safety of machinery — Safety-related parts of control systems — Part 1: General
principles for design
ISO 13850:1996, Safety of machinery — Emergency stop — Principles for design
ISO 13851, Safety of machinery — Two-hand control devices — Functional aspects and design principles
ISO 13852:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the
upper limbs
ISO 13854, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 13855, Safety of machinery — Positioning of protective equipment with respect to the approach speeds of
parts of the human body
ISO 13856-1, Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for
design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 14119:1998, Safety of machinery — Interlocking devices associated with guards — Principles for design
and selection
ISO 14120, Safety of machinery — Guards — General requirements for the design and construction of fixed
and movable guards
ISO 14122-1, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed
means of access between two levels
ISO 14122-2, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms
and walkways
ISO 14122-3, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders
and guard-rails
ISO 14122-4, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
IEC 60079-1, Electrical apparatus for explosive gas atmospheres — Part 1: Flameproof enclosures “d”
IEC 60079-2, Electrical apparatus for explosive gas atmospheres — Part 2: Pressurized enclosures “p”
IEC 60079-5, Electrical apparatus for explosive gas atmospheres — Part 5: Powder filling “q”
IEC 60079-6, Electrical apparatus for explosive gas atmospheres — Part 6: Oil-immersion “o”
IEC 60079-7, Electrical apparatus for explosive gas atmospheres — Part 7: Increased safety “e”
IEC 60079-11, Electrical apparatus for explosive gas atmospheres — Part 11: Intrinsic safety “i”
IEC 60079-14, Electrical apparatus for explosive gas atmospheres — Part 14: Electrical installations in
hazardous areas (other than mines)
IEC 60079-18, Electrical apparatus for explosive gas atmospheres — Part 18: Encapsulation “m”
IEC 60204-1:2000, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
IEC 60825-1, Safety of laser products — Part 1: Equipment classification, requirements and user’s guide
© ISO 2003 — All rights reserved 3

---------------------- Page: 9 ----------------------
ISO 12648:2003(E)
IEC 60947-5-1, Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching
elements — Electromechanical control circuit devices
IEC 61010-1, Safety requirements for electrical equipment for measurement, control, and laboratory use —
Part 1: General requirements
IEC 61310-1, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual,
auditory and tactile signals
IEC 61310-2, Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking
IEC 61496-1, Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements
and tests
IEC 61496-2, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular requirements
for equipment using active opto-electronic protective devices (AOPDs)
ANSI/NFPA 86, Standard for Ovens and Furnaces
EN 378-1, Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1: Basic
requirements, definitions, classification and selection criteria
EN 563, Safety of machinery — Temperatures of touchable surfaces — Ergonomics data to establish
temperature limit values for hot surfaces
EN 1127-1, Explosive atmospheres — Explosion prevention and protection — Basic concepts and
methodology
EN 1539, Dryers and ovens, in which flammable substances are released — Safety requirements
EN 1760-2, Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for the
design and testing of pressure-sensitive edges and pressure-sensitive bars
EN 12198-1:2000, Safety of machinery — Assessment and reduction of risks arising from radiation emitted by
machinery — Part 1: General principles
prEN 13023, Noise measurement methods for printing, paper converting, paper making machines and
auxiliary equipment — Accuracy grades 2 and 3
4 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
4.1
actuator
part of the actuating system to which an external actuating force is applied
[IEV 441-15-22]
NOTE 1 The actuator may take the form of a handle, knob, pushbutton, roller, plunger, etc.
NOTE 2 There are some actuating means that do not require an external actuating force but only an action.
NOTE 3 See also machine actuator (4.32).
4.2
alcohol dosing equipment
equipment for dosing the amount of alcohol in the dampening water of offset printing presses
4 © ISO 2003 — All rights reserved

---------------------- Page: 10 ----------------------
ISO 12648:2003(E)
4.3
armed condition
machine condition in which machine motion can be automatically initiated
NOTE Zero speed (4.88) may be considered to be an armed condition.
4.4
audible alarm
horn, bell or other distinctive audible warning device which, when sounded, indicates impending machine
motion
4.5
authorized person
person designated as such by plant management as having been trained in the following:
a) the task to be performed;
b) the function of the adjustments in the work zone;
c) proper operation of adjustments and controls;
d) all types of hazards in the area where the task is to be performed;
e) the application of equivalent, alternative protection to perform the task;
f) improper actions that can cause injury; and
g) the consequences of those improper actions
4.6
automatic plate clamping device
device for automatic or semi-automatic changing of printing plates
4.7
auxiliary devices for printing presses
devices used for the production process which are either built in or attached to the printing press
4.8
barrier guard
guard closing off access to an area containing one or more hazards
4.9
category 0 stop
stopping by immediate removal of power to the machine actuators (i.e. an uncontrolled stop)
[IEC 60204-1]
4.10
category 1 stop
controlled stop with power to the machine actuators available to achieve the stop and then removal of power
when the stop is achieved
[IEC 60204-1]
4.11
category 2 stop
controlled stop with power to the drive elements of the machines being maintained
[IEC 60204-1]
© ISO 2003 — All rights reserved 5

---------------------- Page: 11 ----------------------
ISO 12648:2003(E)
4.12
coating unit
coater
type of finishing machine for applying liquid substances (for example glue, varnish, ink) on substances made
of paper or similar material in a predetermined thickness; the thickness of the layer is determined by a doctor
blade (scraper) or by the gap between two rollers (metering gap)
4.13
continuous flow drying and curing device
device built into printing presses for drying and curing substrates after the printing process (for example by hot
air, IR or UV radiation)
4.14
crawl speed
continuous motion at a steady slow speed, and initiated by a momentary contact control
4.15
cylinder screen printing press
sheet-fed printing press where the substrate (sheet) is guided along the screen by a printing cylinder
4.16
digital printing press
printing press where the printing image is produced from data stored in digital form
EXAMPLE Exposing a photo-sensitive drum or film in the machine.
4.17
electrical hazard
source of potential injury or death from electric shock or burn
4.18
emergency stop device
manually actuated control device used to initiate an emergency stop function
[ISO 13850:1996]
4.19
emergency stop function
function initiated by a single human action that is intended to avoid injury to persons, damage to machinery or
damage to work in progress
4.20
enabling device
actuating device that needs to be operated in addition to at least one more actuator or device in order to start
a machine under hold-to-run control; machine movement is stopped as soon as one of the hold-to-run controls
or enabling devices is released
4.21
exposing equipment
machinery used for taking images by exposing photo-sensitive material such as printing plates or printing
forms
4.22
fixed guard
guard that is securely affixed by fasteners that require a tool(s) to gain access to a significant hazard
6 © ISO 2003 — All rights reserved

---------------------- Page: 12 ----------------------
ISO 12648:2003(E)
4.23
forms printing press
leporello printing press
machine for the production of continuous forms where paper webs printed with one or multiple colours are
leporello folded or wound onto a reel
NOTE In addition to the printing section, the machine consists of devices for punching, rema liners, cross perforation,
longitudinal perforation and leporello folding.
4.24
gravure press
machine consisting of a printing cylinder, an impression cylinder and an inking system, in which ink is applied
to the printing cylinder by an ink roll or spray, and the excess is removed by a doctor blade; the impression
cylinder, covered with a rubber composition, presses the substrate into contact with the ink in the cells of the
printing surface
4.25
guard
physical barrier that restricts access to a significant hazard
4.26
hazard zone
any area within and/or around machinery in which a person is exposed to risk of injury or damage to health
NOTE Adapted from ISO 12100-1.
4.27
hold-to-run control
control that starts and maintains machine motion only as long as the control is activated (see 5.5)
4.28
in-running nip
in-going nip
area created by either two rotating components that are rotating inward, or one rotating component rotating
toward an adjacent surface
See Figure 1.


a) Two counter- b) Two rolls rotating c) Two rolls rotating d) One rotating roll e) Belt, chain, and
rotating rolls at different speeds in the same and an adjacent fixed possibly a web
direction, but with object driving or being
different surface driven by a roll
properties (friction)
Figure 1 — In-running nips
© ISO 2003 — All rights reserved 7

---------------------- Page: 13 ----------------------
ISO 12648:2003(E)
4.29
inch
jog
motion condition requiring maintained activation of a hold-to-run control; motion will continue until the control
is released or until a pre-determined displacement has been reached (limited inch)
4.30
inch speed
speed at which the press is operating while in inch mode
4.31
infrequently used workplace
area where a function that is routine, repetitive, and integral to (but not necessarily during) production, but
done on an infrequent basis, is conducted
NOTE Examples of such activities include observation, refill of the ink pan, blanket change and plate change, access
to elevated sheet-fed presses, make-ready, minor servicing, jam clearing, etc.
4.32
machine actuator
power mechanism used to effect motion of a machine
[ISO 13850:1996]
4.33
maintained contact control
control that remains opened/closed after activation of the control
4.34
maintenance
operation that is usually performed when the machine is not available for production
EXAMPLE Examples of maintenance operations are repairing or replacing broken, worn or damaged parts;
performing lubrication; preventive servicing, etc. Maintenance is normall
...

SLOVENSKI STANDARD
SIST ISO 12648:2005
01-januar-2005
*UDILþQDWHKQRORJLMD±9DUQRVWQH]DKWHYH]DVLVWHPHWLVNDUVNLKVWURMHY
Graphic technology -- Safety requirements for printing press systems
Technologie graphique -- Exigences de sécurité pour systèmes de presses d'impression
Ta slovenski standard je istoveten z: ISO 12648:2003
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
SIST ISO 12648:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ISO 12648:2005

---------------------- Page: 2 ----------------------

SIST ISO 12648:2005


INTERNATIONAL ISO
STANDARD 12648
First edition
2003-04-01

Graphic technology — Safety
requirements for printing press systems
Technologie graphique — Exigences de sécurité pour systèmes de
presses d'impression




Reference number
ISO 12648:2003(E)
©
ISO 2003

---------------------- Page: 3 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.


©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2003 — All rights reserved

---------------------- Page: 4 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
Contents Page
Foreword. v
Introduction . vi
1 Scope. 1
2 Classifications. 1
2.1 Machines for producing printing by various processes. 1
2.2 Auxiliary equipment. 2
3 Normative references . 2
4 Terms and definitions. 4
5 Guarding of significant hazards . 13
5.1 Guards. 13
5.2 In-running (in-going) nips . 15
5.3 Guarding in-running nips. 16
5.4 Interlocks . 19
5.5 Hold-to-run controls . 21
5.6 Automatic format setting operations . 23
5.7 Other safeguarding measures . 23
5.8 Guarding of machine devices and components. 24
6 Requirements for protection against other hazards . 35
6.1 Fire and explosion . 35
6.2 Spillage from washing devices. 39
6.3 Electrical equipment . 40
6.4 Working platforms, access stairs, passageways and raised workplaces . 40
6.5 Stability . 43
6.6 High contact temperatures. 44
6.7 Noise. 44
6.8 Electrostatic toner dust. 45
6.9 Radiation hazards . 45
6.10 Stationary knives . 46
6.11 Rotary tools . 46
6.12 Hazardous tools . 46
6.13 Protruding machine parts . 47
6.14 Handwheels and cranks . 47
6.15 Washing equipment . 47
6.16 Alcohol dosing devices. 47
6.17 Refrigerating devices in ink and dampening units. 48
6.18 Powder spraying devices. 48
6.19 Routine handling of heavy machine parts. 48
6.20 Oxidizers, incinerators or thermal cleaning plants . 48
7 Release from hazardous situation . 49
8 Control zones . 49
9 Controls. 50
9.1 Manual control devices . 50
9.2 Initiating machine motion. 58
9.3 Hold-to-run controls . 59
9.4 Two-hand controls . 59
9.5 Electro-sensitive protective devices. 60
9.6 Pressure-sensitive mats, pressure-sensitive bumpers, trip devices . 60
© ISO 2003 — All rights reserved iii

---------------------- Page: 5 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
9.7 Braking devices, clutches .61
10 Control stations.61
10.1 Location of operator control stations .62
10.2 Operator control station orientation.62
10.3 Typical operator control stations .62
10.4 Motion control stations.62
11 Control systems .66
11.1 General requirements .66
11.2 Additional requirements for hand-fed machines where the operator's hands enter the
point of operation.67
11.3 Control systems for screen printing presses.68
12 Ergonomics and labelling of indicators and actuators .68
13 Signals and warning devices .68
13.1 Audible warning system .69
13.2 Area light warning system.72
14 Warning signs and labels .72
15 Information for use.73
15.1 Minimum requirements for machine markings .73
15.2 Contents of instruction handbook.74
Annex A (informative) Hazards on printing press systems.78
Annex B (normative) Explosion protection zones .81
Annex C (informative) Risk analysis relating to the pitch angle of access stairs.84
Annex D (informative) Example of layout of instruction handbooks .86
Annex E (normative) Area warning light system.88
Bibliography.90

iv © ISO 2003 — All rights reserved

---------------------- Page: 6 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 12648 was prepared by Technical Committee ISO/TC 130, Graphic technology.
© ISO 2003 — All rights reserved v

---------------------- Page: 7 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
Introduction
During the development of this International Standard, existing relevant standards of other countries were
taken into consideration. An effort has been made to harmonize the requirements of all countries, recognizing
that national standards or laws may dictate national requirements. In cases where it was known that there is a
national requirement that differs from this International Standard, that has been noted.
This International Standard has taken into consideration material contained in ANSI B65.1-1995 Safety
standard — Printing press systems, prEN 1010-1, Technical safety requirements for the design and
construction of printing and paper converting machines — Part 1: Common requirements, and prEN 1010-2,
Technical safety requirements for the design and construction of printing and paper converting machines —
Part 2: Printing and varnishing machines including pre-press machinery.

vi © ISO 2003 — All rights reserved

---------------------- Page: 8 ----------------------

SIST ISO 12648:2005
INTERNATIONAL STANDARD ISO 12648:2003(E)

Graphic technology — Safety requirements for printing press
systems
1 Scope
This International Standard applies to printing press systems, including auxiliary equipment and finishing
machines, in which all the machine actuators (e.g. drives) of the equipment in the system are controlled by the
same control system.
It is applicable only to systems in which a printing press is part of the system. In cases where a
binding/finishing system is not integrated with a printing press, ISO 12649 will apply.
This International Standard provides safety requirements for the design and construction of the classes of
machines listed in Clause 2. It addresses recognized hazards specific to printing press systems in the
following areas:
 mechanical;
 electrical;
 slipping, tripping, falling;
 ergonomics;
 noise;
 radiation;
 fire and explosion;
 thermal;
 emissions.
This International Standard applies to new machines (see Clause 2) manufactured after December 31 of the
year following the year of publication of this International Standard.
2 Classifications
2.1 Machines for producing printing by various processes
 relief (letterpress, flexographic);
 offset (lithographic);
 gravure (rotogravure, intaglio);
 screen printing;
 digital presses (electrostatic, ink jet, thermal, airbrush, etc.).
© ISO 2003 — All rights reserved 1

---------------------- Page: 9 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
2.2 Auxiliary equipment
 washing equipment for cylinders and rollers;
 powder spraying devices;
 alcohol dosing devices;
 imprinting/addressing/numbering equipment;
 automatic plate clamping devices, automatic pile handling equipment;
 washing equipment;
 inserting machines;
 pile turners, reel turners, elevators;
 dryers/pollution control;
 radiation equipment;
 in-line processing and finishing equipment;
 stackers;
 palletizers;
 bundlers;
 coaters;
 chilling systems;
 electrostatic equipment;
 humidifiers;
 accumulating or piling-off devices;
 conveyors;
 unwinding, rewinding, reel transport devices.
3 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 8031, Rubber and plastics hoses and hose assemblies — Determination of electrical resistance
ISO 11553, Safety of machinery — Laser processing machines — Safety requirements
ISO/TR 11688-1, Acoustics — Recommended practice for the design of low-noise machinery and
equipment — Part 1: Planning
ISO 12100-1, Safety of machinery — Basic concepts, general principles for design — Part 1: Basic
terminology, methodology
2 © ISO 2003 — All rights reserved

---------------------- Page: 10 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
ISO 12100-2, Safety of machinery — Basic concepts, general principles for design — Part 2: Technical
principles
ISO 13849-1:1999, Safety of machinery — Safety-related parts of control systems — Part 1: General
principles for design
ISO 13850:1996, Safety of machinery — Emergency stop — Principles for design
ISO 13851, Safety of machinery — Two-hand control devices — Functional aspects and design principles
ISO 13852:1996, Safety of machinery — Safety distances to prevent danger zones being reached by the
upper limbs
ISO 13854, Safety of machinery — Minimum gaps to avoid crushing of parts of the human body
ISO 13855, Safety of machinery — Positioning of protective equipment with respect to the approach speeds of
parts of the human body
ISO 13856-1, Safety of machinery — Pressure-sensitive protective devices — Part 1: General principles for
design and testing of pressure-sensitive mats and pressure-sensitive floors
ISO 14119:1998, Safety of machinery — Interlocking devices associated with guards — Principles for design
and selection
ISO 14120, Safety of machinery — Guards — General requirements for the design and construction of fixed
and movable guards
ISO 14122-1, Safety of machinery — Permanent means of access to machinery — Part 1: Choice of fixed
means of access between two levels
ISO 14122-2, Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms
and walkways
ISO 14122-3, Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders
and guard-rails
ISO 14122-4, Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders
IEC 60079-1, Electrical apparatus for explosive gas atmospheres — Part 1: Flameproof enclosures “d”
IEC 60079-2, Electrical apparatus for explosive gas atmospheres — Part 2: Pressurized enclosures “p”
IEC 60079-5, Electrical apparatus for explosive gas atmospheres — Part 5: Powder filling “q”
IEC 60079-6, Electrical apparatus for explosive gas atmospheres — Part 6: Oil-immersion “o”
IEC 60079-7, Electrical apparatus for explosive gas atmospheres — Part 7: Increased safety “e”
IEC 60079-11, Electrical apparatus for explosive gas atmospheres — Part 11: Intrinsic safety “i”
IEC 60079-14, Electrical apparatus for explosive gas atmospheres — Part 14: Electrical installations in
hazardous areas (other than mines)
IEC 60079-18, Electrical apparatus for explosive gas atmospheres — Part 18: Encapsulation “m”
IEC 60204-1:2000, Safety of machinery — Electrical equipment of machines — Part 1: General requirements
IEC 60825-1, Safety of laser products — Part 1: Equipment classification, requirements and user’s guide
© ISO 2003 — All rights reserved 3

---------------------- Page: 11 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
IEC 60947-5-1, Low-voltage switchgear and controlgear — Part 5-1: Control circuit devices and switching
elements — Electromechanical control circuit devices
IEC 61010-1, Safety requirements for electrical equipment for measurement, control, and laboratory use —
Part 1: General requirements
IEC 61310-1, Safety of machinery — Indication, marking and actuation — Part 1: Requirements for visual,
auditory and tactile signals
IEC 61310-2, Safety of machinery — Indication, marking and actuation — Part 2: Requirements for marking
IEC 61496-1, Safety of machinery — Electro-sensitive protective equipment — Part 1: General requirements
and tests
IEC 61496-2, Safety of machinery — Electro-sensitive protective equipment — Part 2: Particular requirements
for equipment using active opto-electronic protective devices (AOPDs)
ANSI/NFPA 86, Standard for Ovens and Furnaces
EN 378-1, Refrigerating systems and heat pumps — Safety and environmental requirements — Part 1: Basic
requirements, definitions, classification and selection criteria
EN 563, Safety of machinery — Temperatures of touchable surfaces — Ergonomics data to establish
temperature limit values for hot surfaces
EN 1127-1, Explosive atmospheres — Explosion prevention and protection — Basic concepts and
methodology
EN 1539, Dryers and ovens, in which flammable substances are released — Safety requirements
EN 1760-2, Safety of machinery — Pressure-sensitive protective devices — Part 2: General principles for the
design and testing of pressure-sensitive edges and pressure-sensitive bars
EN 12198-1:2000, Safety of machinery — Assessment and reduction of risks arising from radiation emitted by
machinery — Part 1: General principles
prEN 13023, Noise measurement methods for printing, paper converting, paper making machines and
auxiliary equipment — Accuracy grades 2 and 3
4 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
4.1
actuator
part of the actuating system to which an external actuating force is applied
[IEV 441-15-22]
NOTE 1 The actuator may take the form of a handle, knob, pushbutton, roller, plunger, etc.
NOTE 2 There are some actuating means that do not require an external actuating force but only an action.
NOTE 3 See also machine actuator (4.32).
4.2
alcohol dosing equipment
equipment for dosing the amount of alcohol in the dampening water of offset printing presses
4 © ISO 2003 — All rights reserved

---------------------- Page: 12 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
4.3
armed condition
machine condition in which machine motion can be automatically initiated
NOTE Zero speed (4.88) may be considered to be an armed condition.
4.4
audible alarm
horn, bell or other distinctive audible warning device which, when sounded, indicates impending machine
motion
4.5
authorized person
person designated as such by plant management as having been trained in the following:
a) the task to be performed;
b) the function of the adjustments in the work zone;
c) proper operation of adjustments and controls;
d) all types of hazards in the area where the task is to be performed;
e) the application of equivalent, alternative protection to perform the task;
f) improper actions that can cause injury; and
g) the consequences of those improper actions
4.6
automatic plate clamping device
device for automatic or semi-automatic changing of printing plates
4.7
auxiliary devices for printing presses
devices used for the production process which are either built in or attached to the printing press
4.8
barrier guard
guard closing off access to an area containing one or more hazards
4.9
category 0 stop
stopping by immediate removal of power to the machine actuators (i.e. an uncontrolled stop)
[IEC 60204-1]
4.10
category 1 stop
controlled stop with power to the machine actuators available to achieve the stop and then removal of power
when the stop is achieved
[IEC 60204-1]
4.11
category 2 stop
controlled stop with power to the drive elements of the machines being maintained
[IEC 60204-1]
© ISO 2003 — All rights reserved 5

---------------------- Page: 13 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
4.12
coating unit
coater
type of finishing machine for applying liquid substances (for example glue, varnish, ink) on substances made
of paper or similar material in a predetermined thickness; the thickness of the layer is determined by a doctor
blade (scraper) or by the gap between two rollers (metering gap)
4.13
continuous flow drying and curing device
device built into printing presses for drying and curing substrates after the printing process (for example by hot
air, IR or UV radiation)
4.14
crawl speed
continuous motion at a steady slow speed, and initiated by a momentary contact control
4.15
cylinder screen printing press
sheet-fed printing press where the substrate (sheet) is guided along the screen by a printing cylinder
4.16
digital printing press
printing press where the printing image is produced from data stored in digital form
EXAMPLE Exposing a photo-sensitive drum or film in the machine.
4.17
electrical hazard
source of potential injury or death from electric shock or burn
4.18
emergency stop device
manually actuated control device used to initiate an emergency stop function
[ISO 13850:1996]
4.19
emergency stop function
function initiated by a single human action that is intended to avoid injury to persons, damage to machinery or
damage to work in progress
4.20
enabling device
actuating device that needs to be operated in addition to at least one more actuator or device in order to start
a machine under hold-to-run control; machine movement is stopped as soon as one of the hold-to-run controls
or enabling devices is released
4.21
exposing equipment
machinery used for taking images by exposing photo-sensitive material such as printing plates or printing
forms
4.22
fixed guard
guard that is securely affixed by fasteners that require a tool(s) to gain access to a significant hazard
6 © ISO 2003 — All rights reserved

---------------------- Page: 14 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
4.23
forms printing press
leporello printing press
machine for the production of continuous forms where paper webs printed with one or multiple colours are
leporello folded or wound onto a reel
NOTE In addition to the printing section, the machine consists of devices for punching, rema liners, cross perforation,
longitudinal perforation and leporello folding.
4.24
gravure press
machine consisting of a printing cylinder, an impression cylinder and an inking system, in which ink is applied
to the printing cylinder by an ink roll or spray, and the excess is removed by a doctor blade; the impression
cylinder, covered with a rubber composition, presses the substrate into contact with the ink in the cells of the
printing surface
4.25
guard
physical barrier that restricts access to a significant hazard
4.26
hazard zone
any area within and/or around machinery in which a person is exposed to risk of injury or damage to health
NOTE Adapted from ISO 12100-1.
4.27
hold-to-run control
control that starts and maintains machine motion only as long as the control is activated (see 5.5)
4.28
in-running nip
in-going nip
area created by either two rotating components that are rotating inward, or one rotating component rotating
toward an adjacent surface
See Figure 1.


a) Two counter- b) Two rolls rotating c) Two rolls rotating d) One rotating roll e) Belt, chain, and
rotating rolls at different speeds in the same and an adjacent fixed possibly a web
direction, but with object driving or being
different surface driven by a roll
properties (friction)
Figure 1 — In-running nips
© ISO 2003 — All rights reserved 7

---------------------- Page: 15 ----------------------

SIST ISO 12648:2005
ISO 12648:2003(E)
4.29
inch
jog
motion condition requiring maintained activation of a hold-to-run control; motion will continue until the control
is released or until a pre-determined displacement
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.