SIST EN 14313:2010/kFprA1:2012

Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification

This European Standard specifies the requirements for factory made flexible polyethylene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 80 °C to + 150 °C.
The products are manufactured in the form of tubes, profiles, sheets, rolls and tapes with or without coating and/or self-adhesive backing and/or different closure systems.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.
This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.
Products with a declared thermal conductivity greater than 0,050 W/(m·K) at 10 °C are not covered by this standard.
This standard does not cover products for the insulation of the building structure.
The normative part of this standard does not cover compressive stress (see Annex C, C.4).

Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Polyethylenschaum (PEF) - Spezifikation

Produits isolants thermiques pour l’équipement du bâtiment et les installations industrielles - Produits manufacturés en mousse de polyéthylène (PEF) - Spécification

Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Proizvodi iz polietilenske pene (PEF) - Specifikacija

General Information

• Status: Not Published
• Public Enquiry End Date: 29-Aug-2012
• ICS: 91.100.60 - Thermal and sound insulating materials
• Technical Committee: TOP - Thermal insulation
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 15-Jul-2015
• Due Date: 20-Jul-2015
• Completion Date: 15-Jul-2015
• Directive: 89/106/EEC - Construction products
• Mandate: M/103 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on thermal insulating products
• Ref Project: EN 14313:2009/FprA1 - Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification

Relations

• Consolidated By: SIST EN 14313:2010+A1:2013 - Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 14313:2010+A1:2013 - Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 14313:2010/kFprA1:2012
01-julij-2012
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Proizvodi iz polietilenske pene (PEF) - Specifikacija
Thermal insulation products for building equipment and industrial installations - Factory
made polyethylene foam (PEF) products - Specification
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus Polyethylenschaum
(PEF) - Spezifikation
Produits isolants thermiques pour l’équipement du bâtiment et les installations
industrielles - Produits manufacturés en mousse de polyéthylène (PEF) - Spécification
Ta slovenski standard je istoveten z: EN 14313:2009/FprA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 14313:2010/kFprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 14313:2010/kFprA1:2012

---------------------- Page: 2 ----------------------

SIST EN 14313:2010/kFprA1:2012


EUROPEAN STANDARD
FINAL DRAFT
EN 14313:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2012
ICS 91.100.60
English Version
Thermal insulation products for building equipment and industrial
installations - Factory made polyethylene foam (PEF) products -
Specification
Produits isolants thermiques pour l'équipement du bâtiment Wärmedämmstoffe für die technische Gebäudeausrüstung
et les installations industrielles - Produits manufacturés en
und für betriebstechnische Anlagen in der Industrie -
mousse de polyéthylène (PEF) - Spécification Werkmäßig hergestellte Produkte aus Polyethylenschaum
(PEF) - Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 88.

This draft amendment A1, if approved, will modify the European Standard EN 14313:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

Recipients of this draft are invited to subm
...