SIST EN ISO 19232-4:2013

Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (ISO 19232-4:2013)

This part of ISO 19232 gives instructions for the determination of image quality values and image quality tables. If the IQI requirements specified in ISO 19232-3 cannot be used because, for example, the absorption coefficients of the IQI material and the inspected material differ by more than 30 %, test exposures are necessary to determine acceptance of image quality values. The image quality values achieved by the test exposures are required for all exposures made under the same radiographic conditions.

Zerstörungsfreie Prüfung - Bildgüte von Durchstrahlungsaufnahmen - Teil 4: Experimentelle Ermittlung von Bildgütezahl und Bildgütetabellen (ISO 19232-4:2013)

Dieser Teil von ISO 19232 gibt Anleitungen für die Bestimmung von Bildgütezahlen und Bildgütetabellen.
Wenn die Bildgüteanforderungen nach Teil 3 dieser Norm nicht verwendet werden können, zum Beispiel, weil sich die Absorptionskoeffizienten des BPK Materials und des untersuchten Materials um mehr als 30 % unter-scheiden, sind Testaufnahmen notwendig, um die Annahme von Bildgütezahlen sicherzustellen. Die Bildgüte-zahlen, die durch Testaufnahmen erreicht wurden, werden für alle Durchstrahlungsaufnahmen gefordert, die unter denselben Durchstrahlungsbedingungen gemacht werden.

Essais non destructifs - Qualité d'image des radiogrammes - Partie 4: Évaluation expérimentale des indices de qualité d'image et des tables de qualité d'image (ISO 19232-4:2013)

L'ISO 19232-4:2013 donne les instructions pour déterminer les indices de qualité d'image et les tables de qualité d'image.
S'il n'est pas possible d'appliquer à l'IQI les exigences spécifiées dans l'ISO 19232-3, parce que, par exemple, les coefficients d'absorption du matériau de l'IQI et du matériau soumis à essai diffèrent de plus de 30 %, il est nécessaire d'utiliser des expositions d'essai pour déterminer des indices de qualité d'image acceptables. Les indices de qualité d'image obtenus par les expositions d'essai sont requis pour toutes les expositions faites dans les mêmes conditions radiographiques.

Neporušitveno preskušanje - Kakovost radiografske slike - 4. del: Eksperimentalno ugotavljanje stopnje kakovosti slike in tabel kakovosti slike (ISO 19232-4:2013)

Ta del standarda ISO 19232 podaja navodila za ugotavljanje stopnje kakovosti slike in tabel kakovosti slike. Če zahtev IQI, ki so določene v standardu ISO 19232-3, ni mogoče uporabljati, ker se na primer koeficienta absorbcije materiala IQI in pregledanega materiala razlikujeta za več kot 30 %, so potrebne preskusne izpostavitve, da se ugotovi sprejemljivost stopenj kakovosti slike. Stopnje kakovosti slike, pridobljene s preskusnimi izpostavitvami, so zahtevane za vse izpostavitve, opravljene pod enakimi radiografskimi pogoji.

General Information

• Status: Published
• Public Enquiry End Date: 29-Sep-2011
• Publication Date: 22-Sep-2013
• ICS: 19.100 - Non-destructive testing
• Technical Committee: PKG - Testing of metallic materials
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Jul-2013
• Due Date: 05-Sep-2013
• Completion Date: 23-Sep-2013
• Ref Project: EN ISO 19232-4:2013 - Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables (ISO 19232-4:2013)

Relations

• Replaces: SIST EN 462-4:1996 - Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
• Effective Date: 01-Oct-2013
• Replaces: SIST EN 462-4:1996 - Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19232-4:2013
01-oktober-2013
1DGRPHãþD
SIST EN 462-4:1996
Neporušitveno preskušanje - Kakovost radiografske slike - 4. del: Eksperimentalno
ugotavljanje stopnje kakovosti slike in tabel kakovosti slike (ISO 19232-4:2013)
Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation
of image quality values and image quality tables (ISO 19232-4:2013)
Zerstörungsfreie Prüfung - Bildgüte von Durchstrahlungsaufnahmen - Teil 4:
Experimentelle Ermittlung von Bildgütezahl und Bildgütetabellen (ISO 19232-4:2013)
Essais non destructifs - Qualité d'image des radiogrammes - Partie 4: Évaluation
expérimentale des indices de qualité d'image et des tables de qualité d'image (ISO
19232-4:2013)
Ta slovenski standard je istoveten z: EN ISO 19232-4:2013
ICS:
19.100 Neporušitveno preskušanje Non-destructive testing
SIST EN ISO 19232-4:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19232-4:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 19232-4:2013


EUROPEAN STANDARD
EN ISO 19232-4

NORME EUROPÉENNE

EUROPÄISCHE NORM
June 2013
ICS 19.100 Supersedes EN 462-4:1994
English Version
Non-destructive testing - Image quality of radiographs - Part 4:
Experimental evaluation of image quality values and image
quality tables (ISO 19232-4:2013)
Essais non destructifs - Qualité d'image des radiogrammes Zerstörungsfreie Prüfung - Bildgüte von
- Partie 4: Évaluation expérimentale des indices de qualité Durchstrahlungsaufnahmen - Teil 4: Experimentelle
d'image et des tables de qualité d'image (ISO 19232- Ermittlung von Bildgütezahl und Bildgütetabellen (ISO
4:2013) 19232-4:2013)
This European Standard was approved by CEN on 15 May 2013.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19232-4:2013: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19232-4:2013
EN ISO 19232-4:2013 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 19232-4:2013
EN ISO 19232-4:2013 (E)
Foreword
This document (EN ISO 19232-4:2013) has been prepared by Technical Committee ISO/TC 135 "Non-
destructive testing" in collaboration with Technical Committee CEN/TC 138 “Non-destructive testing” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2013, and conflicting national standards shall be withdrawn
at the latest by December 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 462-4:1994.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19232-4:2013 has been approved by CEN as EN ISO 19232-4:2013 without any modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 19232-4:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 19232-4:2013
INTERNATIONAL ISO
STANDARD 19232-4
Second edition
2013-06-15
Non-destructive testing — Image
quality of radiographs —
Part 4:
Experimental evaluation of image
quality values and image quality tables
Essais non destructifs — Qualité d’image des radiogrammes —
Partie 4: Évaluation expérimentale des indices de qualité d’image et
des tables de qualité d’image
Reference number
ISO 19232-4:2013(E)
©
ISO 2013

---------------------- Page: 7 ----------------------

SIST EN ISO 19232-4:2013
ISO 19232-4:2013(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2013
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 19232-4:2013
ISO 19232-4:2013(E)

Contents Page
Foreword .iv
1 Scope .
...