SIST EN 13880-5:2024
(Main)Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
This document describes a method for determining the flow resistance of hot applied joint sealants to characterize the stability at elevated temperature.
Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge
Dieses Dokument beschreibt ein Verfahren zur Bestimmung der Fließlänge von heiß verarbeitbaren Fugenmassen, um die Stabilität bei erhöhter Temperatur zu charakterisieren.
Produits d'étanchéité pour joints appliqués à chaud - Partie 5 : Méthode d'essai pour la détermination de la résistance à l'écoulement
Ce document décrit une méthode pour déterminer la résistance au fluage des produits de scellement appliqués à chaud afin de caractériser la stabilité à température élevée.
Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje pretočnega upora
Ta dokument opisuje metodo za ugotavljanje pretočnega upora toplo nanosljivih tesnilnih mas za stike.
General Information
Relations
Overview
EN 13880-5:2024 is the CEN test method for determining the flow resistance of hot-applied joint sealants. Approved by CEN in January 2024, this part of the EN 13880 series characterizes the stability of sealants at elevated temperature and replaces EN 13880-5:2004. The procedure quantifies the movement of a specimen's lower transverse edge after exposure to a controlled high-temperature condition.
Key Topics
- Scope and purpose: Measures resistance to flow (movement) of a rectangular plate-shaped sealant specimen under elevated temperature to assess stability.
- Principle: A representative sealant portion is formed into a rectangular specimen on a metal sample carrier. The specimen is sloped in a test stand and held at the test temperature for the test duration; flow of the lower transverse edge is measured.
- Apparatus: Includes a forced-air ventilated laboratory oven (ISO 188 compatible), a metal grouting frame and roughened metal plate sample carrier, and a sloping test stand to set the specimen axis at (75 ± 2)° to the horizontal.
- Specimen dimensions and preparation: The grouted specimen dimensions are L (60 ± 1) mm × W (40 ± 1) mm × thickness (3,2 ± 0,05) mm, prepared using EN 13880-6 and EN 12594 guidance. A release agent is applied to the frame; excess material is trimmed after cooling.
- Test conditions: Temperature (60,0 ± 1) °C for a duration of 300 ± 3 min (5 hours). The plate is preheated in the oven and then conditioned at slope in the oven for the specified period.
- Results and reporting: Flow resistance is reported as the average of two determinations, rounded to the nearest 1 mm. The test report shall include product identification, batch details, sample preparation and conditioning, individual values, test result, date, and laboratory/analyst identification.
- Precision: Repeatability and reproducibility estimates are not yet available and will be included by amendment when known.
Applications
- Quality control and batch verification of hot-applied joint sealants.
- Specification and compliance checks for road construction and sealing materials.
- Comparative performance assessment during product development or reformulation.
- Part of a combined test regime (density, penetration, heat resistance, adhesion) for comprehensive sealant evaluation.
Related Standards
- EN 13880 series (Parts 1–13) - companion test methods for hot-applied joint sealants.
- EN 13880-6 - sample preparation for testing.
- EN 12594 - preparation of test samples for bitumen and bituminous binders.
- ISO 188 - accelerated ageing and heat resistance tests (oven requirements).
- EN 14188-1 - joint fillers and sealants specification (referenced in bibliography).
This standard is essential for laboratories, manufacturers and specifiers working with hot-applied sealants where thermal stability and flow resistance are critical performance criteria.
Frequently Asked Questions
SIST EN 13880-5:2024 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Hot applied joint sealants - Part 5: Test method for the determination of flow resistance". This standard covers: This document describes a method for determining the flow resistance of hot applied joint sealants to characterize the stability at elevated temperature.
This document describes a method for determining the flow resistance of hot applied joint sealants to characterize the stability at elevated temperature.
SIST EN 13880-5:2024 is classified under the following ICS (International Classification for Standards) categories: 91.100.50 - Binders. Sealing materials; 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 13880-5:2024 has the following relationships with other standards: It is inter standard links to SIST EN 13880-5:2005. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 13880-5:2024 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase SIST EN 13880-5:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of SIST standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Nadomešča:
SIST EN 13880-5:2005
Toplo nanosljive tesnilne mase za stike - 5. del: Preskusna metoda za ugotavljanje
pretočnega upora
Hot applied joint sealants - Part 5: Test method for the determination of flow resistance
Heiß verarbeitbare Fugenmassen - Teil 5: Prüfverfahren zur Bestimmung der Fließlänge
Produits d'étanchéité pour joints appliqués à chaud - Partie 5 : Méthode d'essai pour la
détermination de la résistance à l'écoulement
Ta slovenski standard je istoveten z: EN 13880-5:2024
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13880-5
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2024
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13880-5:2004
English Version
Hot applied joint sealants - Part 5: Test method for the
determination of flow resistance
Produits d'étanchéité pour joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 5:
Partie 5 : Méthode d'essai pour la détermination de la Prüfverfahren zur Bestimmung der Fließlänge
résistance à l'écoulement
This European Standard was approved by CEN on 4 January 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13880-5:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Term and definition . 5
4 Principle . 5
5 Apparatus . 5
6 Preparation and conditioning of the test specimens . 7
7 Test conditions . 8
8 Procedure. 8
9 Expression of results . 8
10 Precision . 8
11 Test report . 9
Bibliography . 10
European foreword
This document (EN 13880-5:2024) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2024, and conflicting national standards shall
be withdrawn at the latest by September 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13880-5:2004.
The main changes compared to the previous edition are listed below:
— normative references have been updated;
— scope, definition and principle have been clarified;
— preparation and conditioning actions have been better specified;
— procedure has been redrafted for better description.
This document is one of a series of standards as listed below:
EN 13880-1, Hot applied joint sealants — Part 1: Test method for the determination of density at 25 °C
EN 13880-2, Hot applied joint sealants — Part 2: Test method for the determination of cone penetration at
25 °C
EN 13880-3, Hot applied joint sealants — Part 3: Test method for the determination of penetration and
recovery (resilience)
EN 13880-4, Hot applied joint sealants — Part 4: Test method for the determination of heat resistance —
Change in penetration value
EN 13880-5, Hot applied joint sealants — Part 5: Test method for the determination of flow resistance
EN 13880-6, Hot applied joint sealants — Part 6: Test method for the preparation of samples for testing
EN 13880-7, Hot applied joint sealants — Part 7: Function testing of joint sealants
EN 13880-8, Hot applied joint sealants — Part 8: Test method for the determination of the change in weight
of fuel resistance joint sealants after fuel immersion
EN 13880-9, Hot applied joint sealants — Part 9: Test method for the determination of compatibility with
asphalt pavements
EN 13880-10, Hot applied joint sealants — Part 10: Test method for the determination of adhesion and
cohesion following continuous extension and compression
EN 13880-11, Hot applied joint sealants — Part 11: Test method for the preparation of asphalt test blocks
used in the function test and for the determination of compatibility with asphalt pavements
EN 13880-12, Hot applied joint sealants — Part 12: Test method for the manufacture of concrete test blocks
for testing (recipe methods)
EN 13880-13, Hot applied joint sealants — Part 13: Test method for the determination of the discontinuous
extension (adherence test)
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Stan
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...