iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TP ISO/TR 10064-5:2006/TC 1:2006

(Main)

ISO/TR 10064-5:2005/Cor 1:2006

ISO/TR 10064-5:2005/Cor 1:2006

This part of ISO/TR 10064 provides additional information and examples to support the implementation of ISO 18653. It proposes evaluation and calibration procedures for involute, helix, pitch, runout, and tooth thickness measurement processes. Methods are given for evaluation of the condition and alignments of instrument elements such as centres, guideways, probe systems, etc. Recommendations are included for establishment of a proper environment and for statistical data evaluation procedures. It also covers the application of gear artifacts to the estimation of U95 measurement process uncertainty. Guidance on the application of measurement processes to the inspection of product gears is provided, including fitness for use and the recommended limits for U95 uncertainty based upon the accuracy tolerances of product gears to be inspected. Many of its recommendations may also be applicable to the measurement of worms, worm wheels, bevel gears and gear cutting tools.

Code pratique de réception — Partie 5: Recommandations relatives à l'évaluation des instruments de mesure des engrenages — Rectificatif technique 1

Valjasti zobniki – Smernice za pregledovanje – 5. del: Priporočila za vrednotenje merilne negotovosti instrumentov za merjenje zobnikov – Tehnični popravek 1

General Information

Status
Published
Publication Date
30-Nov-2006
ICS
21.200 - Gears
Technical Committee
ISEL - Mechanical elements
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Dec-2006
Due Date
01-Dec-2006
Completion Date
01-Dec-2006
Ref Project
ISO/TR 10064-5:2005/Cor 1:2006 - Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments — Technical Corrigendum 1

Relations

Child
SIST-TP ISO/TR 10064-5:2006 - Cylindrical gears - Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments
Effective Date
12-May-2008
Child
ISO/TR 10064-5:2005 - Code of inspection practice — Part 5: Recommendations relative to evaluation of gear measuring instruments
Effective Date
14-Aug-2008
Corrects
SIST-TP ISO/TR 10064-5:2006 - Cylindrical gears - Code of inspection practice -- Part 5: Recommendations relative to evaluation of gear measuring instruments
Effective Date
06-Jun-2022

Buy Standard

ISO 10064-5:2006/TC1:2006ISO 10064-5:2006/TC1:2006
PreviousNext
Corrigendum
ISO 10064-5:2006/TC1:2006
English language
1 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SIST-TP ISO/TR 10064-5:2006/TC 1:2006SLOVENSKIdecember 2006
STANDARDValjasti zobniki – Smernice za pregledovanje – 5. del: Priporočila za vrednotenje merilne negotovosti instrumentov za merjenje zobnikov – Tehnični popravek 1Cylindrical gears - Code of inspection practice -
Part 5: Recommendations relative to evaluation of
gear measuring instruments - Technical
Corrigendum 1©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST-TP ISO/TR 10064-5:2006/TC 1:2006(en)ICS21.200







ICS
21.200 Ref. No. ISO/TR 10064-5:2005/Cor.1:2006(E)©
ISO 2006 – All rights reserved Printed in Switzerland
TECHNICAL REPORT ISO/TR 10064-5:2005 TECHNICAL CORRIGENDUM 1 Published 2006-08-01 INTERNATIONAL ORGANIZATION FOR STANDARDI
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST ISO 1328-2:2023(Main)
Cylindrical gears - ISO system of flank tolerance classification - Part 2: Definitions and allowable values of double flank radial composite deviations
ISO 1328-2:2020

This document establishes a gear tooth classification system relevant to double flank radial composite deviations of individual cylindrical involute gears and sector gears. It specifies the appropriate definitions of gear tooth deviations, the structure of the gear tooth flank classification system, and the allowable values of the gear tooth deviations. It provides formulae to calculate tolerances for individual product gears when mated in double flank contact with a master gear. Tolerance tables are not included.
This document is applicable to gears with three or more teeth that have reference diameters of up to 600 mm.
This document does not provide guidance on gear design nor does it recommend tolerances.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    22 pages
    English language
    sale 15% off
  • Standard
    25 pages
    French language
    sale 15% off
SIST
SIST ISO 4468:2020(Main)
Gear hobs - Accuracy requirements
ISO 4468:2020

This document specifies requirements for the accuracy of general-purpose hobs of 0,5 module to 40 module.
These hobs are intended for producing gears which conform to ISO 53 and ISO 54.
This document applies to hobs for spur and helical gears. It applies to solid (monobloc) and inserted blade hobs.
The elemental features of hobs are graded according to accuracy, as follows:
— Grade 4A;
— Grade 3A;
— Grade 2A;
— Grade A;
— Grade B;
— Grade C;
— Grade D.
Grade 4A is the highest order of precision.
In addition to the elemental tests for hobs, this document gives permitted tolerances for composite tests that are taken along the cutting edges on the line of action. The two groups of tests are not equivalent and one can choose between one or the other. If there was no previous agreement, the hob is regarded as belonging to the precision class specified if it satisfies one or the other of the two methods of inspection.
NOTE The tolerances in this document were determined for gear hobs whose dimensions conform to ISO 2490, but with certain precautions they can be applied to hobs not specified in this document.

  • Standard
    39 pages
    English language
    sale 15% off
  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 15% off
SIST
SIST ISO 6336-1:2020(Main)
Calculation of load capacity of spur and helical gears - Part 1: Basic principles, introduction and general influence factors
ISO 6336-1:2019

This document presents the basic principles of, an introduction to, and the general influence factors for the calculation of the load capacity of spur and helical gears. Together with the other documents in the ISO 6336 series, it provides a method by which different gear designs can be compared. It is not intended to assure the performance of assembled drive gear systems. It is not intended for use by the general engineering public. Instead, it is intended for use by the experienced gear designer who is capable of selecting reasonable values for the factors in these formulae based on the knowledge of similar designs and the awareness of the effects of the items discussed.
The formulae in the ISO 6336 series are intended to establish a uniformly acceptable method for calculating the load capacity of cylindrical gears with straight or helical involute teeth.
The ISO 6336 series includes procedures based on testing and theoretical studies as referenced by each method. The methods are validated for:
— normal working pressure angle from 15° to 25°;
— reference helix angle up to 30°;
— transverse contact ratio from 1,0 to 2,5.
If this scope is exceeded, the calculated results will need to be confirmed by experience.
The formulae in the ISO 6336 series are not applicable when any of the following conditions exist:
— gears with transverse contact ratios less than 1,0;
— interference between tooth tips and root fillets;
— teeth are pointed;
— backlash is zero.
The rating formulae in the ISO 6336 series are not applicable to other types of gear tooth deterioration such as plastic deformation, case crushing and wear, and are not applicable under vibratory conditions where there can be an unpredictable profile breakdown. The ISO 6336 series does not apply to teeth finished by forging or sintering. It is not applicable to gears which have a poor contact pattern.
The influence factors presented in these methods form a method to predict the risk of damage that aligns with industry and experimental experience. It is possible that they are not entirely scientifically exact. Therefore, the calculation methods from one part of the ISO 6336 series is not applicable in another part of the ISO 6336 series unless specifically referenced.
The procedures in the ISO 6336 series provide rating formulae for the calculation of load capacity with regard to different failure modes such as pitting, tooth root breakage, tooth flank fracture, scuffing and micropitting. At pitch line velocities below 1 m/s the gear load capacity is often limited by abrasive wear (see other literature such as References [23] and [22] for further information on such calculation).

  • Standard
    142 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    134 pages
    English language
    sale 15% off
  • Standard
    137 pages
    French language
    sale 15% off
SIST
SIST-TP ISO/TR 10064-1:2020(Main)
Code of inspection practice - Part 1: Measurement of cylindrical gear tooth flanks
ISO/TR 10064-1:2019

This document supplements ISO 1328‑1:2013. It provides a code of practice dealing with measurements on flanks of individual cylindrical involute gears, i.e. with the measurement of pitch, profile, helix and tangential composite characteristics. It describes measuring equipment, provides advice for gear measuring methods and for the analysis of measurement results, and discusses the interpretation of results.
Measurements using a double flank tester are not included (see ISO/TR 10064‑2). This document only applies to involute gears.

  • Technical report
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    88 pages
    English language
    sale 15% off
  • Technical report
    103 pages
    French language
    sale 15% off
SIST
SIST ISO 6336-3:2020(Main)
Calculation of load capacity of spur and helical gears - Part 3: Calculation of tooth bending strength
ISO 6336-3:2019

This document specifies the fundamental formulae for use in tooth bending stress calculations for involute external or internal spur and helical gears with a rim thickness sR > 0,5 ht for external gears and sR > 1,75 mn for internal gears. In service, internal gears can experience failure modes other than tooth bending fatigue, i.e. fractures starting at the root diameter and progressing radially outward. This document does not provide adequate safety against failure modes other than tooth bending fatigue. All load influences on the tooth root stress are included in so far as they are the result of loads transmitted by the gears and in so far as they can be evaluated quantitatively.
This document includes procedures based on testing and theoretical studies such as those of Hirt[11], Strasser[14] and Brossmann[10]. The results are in good agreement with other methods (References [5], [6], [7] and [12]). The given formulae are valid for spur and helical gears with tooth profiles in accordance with the basic rack standardized in ISO 53. They can also be used for teeth conjugate to other basic racks if the virtual contact ratio εαn is less than 2,5.
The load capacity determined on the basis of permissible bending stress is termed "tooth bending strength". The results are in good agreement with other methods for the range, as indicated in the scope of ISO 6336‑1.
If this scope does not apply, refer to ISO 6336-1:2019, Clause 4.

  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    55 pages
    English language
    sale 15% off
  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    French language
    sale 15% off
  • Standard
    56 pages
    French language
    sale 15% off
SIST
SIST ISO 23509:2020(Main)
Bevel and hypoid gear geometry
ISO 23509:2016

ISO 23509:2016 specifies the geometry of bevel gears.
The term bevel gears is used to mean straight, spiral, zerol bevel and hypoid gear designs. If the text pertains to one or more, but not all, of these, the specific forms are identified.
The manufacturing process of forming the desired tooth form is not intended to imply any specific process, but rather to be general in nature and applicable to all methods of manufacture.
The geometry for the calculation of factors used in bevel gear rating, such as ISO 10300 (all parts), is also included.
ISO 23509:2016 is intended for use by an experienced gear designer capable of selecting reasonable values for the factors based on his/her knowledge and background. It is not intended for use by the engineering public at large.
Annex A provides a structure for the calculation of the methods provided in this document.

  • Standard
    144 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    138 pages
    English language
    sale 15% off
  • Standard
    138 pages
    French language
    sale 15% off
SIST
SIST ISO 6336-6:2020(Main)
Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load
ISO 6336-6:2019

This document specifies the information and standardized conditions necessary for the calculation of the service life (or safety factors for a required life) of gears subject to variable loading for only pitting and tooth root bending strength.
If this scope does not apply, refer ISO 6336-1:2019, Clause 4.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    39 pages
    French language
    sale 15% off
SIST
SIST ISO 6336-2:2020(Main)
Calculation of load capacity of spur and helical gears - Part 2: Calculation of surface durability (pitting)
ISO 6336-2:2019

This document specifies the fundamental formulae for use in the determination of the surface load capacity of cylindrical gears with involute external or internal teeth. It includes formulae for all influences on surface durability for which quantitative assessments can be made. It applies primarily to oil‑lubricated transmissions, but can also be used to obtain approximate values for (slow‑running) grease‑lubricated transmissions, as long as sufficient lubricant is present in the mesh at all times.
The given formulae are valid for cylindrical gears with tooth profiles in accordance with the basic rack standardized in ISO 53. They can also be used for teeth conjugate to other basic racks where the actual transverse contact ratio is less than εαn = 2,5. The results are in good agreement with other methods (see References [5], [7], [10], [12]).
These formulae cannot be directly applied for the assessment of types of gear tooth surface damage such as plastic yielding, scratching, scuffing and so on, other than that described in Clause 4.
The load capacity determined by way of the permissible contact stress is called the "surface load capacity" or "surface durability".
If this scope does not apply, refer to ISO 6336-1:2019, Clause 4.

  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    37 pages
    English language
    sale 15% off
  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    French language
    sale 15% off
  • Standard
    37 pages
    French language
    sale 15% off
SIST
SIST ISO 14104:2020(Main)
Gears - Surface temper etch inspection after grinding, chemical method
ISO 14104:2017

ISO 14104:2017 specifies procedures and requirements for the detection and classification of localized overheating on ground surfaces by chemical etch methods.
The process described in this document is typically used on ground surfaces; however, it is also useful for the detection of surface anomalies that result from post-heat treatment machining such as hard turning, milling and edge breaking (deburring) processes. Surface metallurgical anomalies caused by carburization or decarburization are also readily detectable with this process.
Some methods which have been used in the past are no longer recommended. Specifications are intended to be changed to use the methods in this document. These etching methods are more sensitive to changes in surface hardness than most hardness testing methods.
ISO 14104:2017 applies to steel parts such as gears, shafts, splines and bearings. It is not applicable to nitrided parts and stainless steels.
NOTE This process, although at times called "nital etch", is not intended to be confused with other processes also known as "nital etch".
The surface temper etch procedure is performed after grinding and before additional finishing operations such as superfinishing, shot peening and honing.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    17 pages
    English language
    sale 15% off
  • Standard
    18 pages
    French language
    sale 15% off
SIST
SIST ISO 6336-5:2018(Main)
Calculation of load capacity of spur and helical gears - Part 5: Strength and quality of materials (ISO 6336-5:2016)
ISO 6336-5:2016

This document describes contact and tooth-root stresses and gives numerical values for both limit
stress numbers. It specifies requirements for material quality and heat treatment and comments on
their influences on both limit stress numbers.
Values in accordance with this document are suitable for use with the calculation procedures provided
in ISO 6336-2, ISO 6336-3 and ISO 6336-6 and in the application standards for industrial, high-speed
and marine gears. They are applicable to the calculation procedures given in ISO 10300 for rating the
load capacity of bevel gears. This document is applicable to all gearing, basic rack profiles, profile
dimensions, design, etc., covered by those standards. The results are in good agreement with other
methods for the range indicated in the scope of ISO 6336-1 and ISO 10300-1.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    47 pages
    English language
    sale 15% off
  • Standard
    48 pages
    French language
    sale 15% off