iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST ENV 50152-3-1:1998

(Main)

Railway applications - Fixed installations - Particular requirements for a.c. switchgear -- Part 3: Measurement, control and protection devices for specific use in a.c. traction systems -- Section 1: Application guide

Railway applications - Fixed installations - Particular requirements for a.c. switchgear -- Part 3: Measurement, control and protection devices for specific use in a.c. traction systems -- Section 1: Application guide

Superseded by EN 50152-3-1:2003

Bahnanwendungen - Ortsfeste Anlagen - Besondere Anforderungen an Wechselstrom-Schalteinrichtungen -- Teil 3: Meß-, Steuer- und Schutzeinrichtungen für Wechselstrom-Bahnanlagen -- Hauptabschnitt 1: Anwendungsleitfaden

Applications ferroviaires - Installations fixes - Prescriptions particulières pour appareillage à courant alternatif -- Partie 3: Dispositifs de mesure, de commande et de protection pour usage spécifique dans les systèmes de traction à courant alternatif -- Section 1: Guide d'application

Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3: Measurement, control and protection devices for specific use in a.c. traction systems - Section 1: Application guide

General Information

Status
Withdrawn
Publication Date
31-Oct-1998
Withdrawal Date
31-Aug-2004
ICS
29.120.50 - Fuses and other overcurrent protection devices
Technical Committee
ŽEN - Electrical applications for railways
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2004
Due Date
01-Sep-2004
Completion Date
01-Sep-2004
Ref Project
ENV 50152-3-1:1998 - Railway applications - Fixed installations - Particular requirements for a.c. switchgear - Part 3: Measurement, control and protection devices for specific use in a.c. traction systems - Section 1: Application guide

Relations

Replaced By
SIST EN 50152-3-1:2004 - Railway applications - Fixed installations - Particular requirements for a.c. switchgear -- Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Application guide
Effective Date
06-May-2014
Replaced By
SIST EN 50152-3-1:2004 - Railway applications - Fixed installations - Particular requirements for a.c. switchgear -- Part 3-1: Measurement, control and protection devices for specific use in a.c. traction systems - Application guide
Effective Date
29-Jan-2023

Buy Standard

ENV 50152-3-1:1998ENV 50152-3-1:1998
PreviousNext
Standard
ENV 50152-3-1:1998
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST ENV 50152-3-1:1998
01-november-1998
Railway applications - Fixed installations - Particular requirements for a.c.
switchgear - Part 3: Measurement, control and protection devices for specific use
in a.c. traction systems - Section 1: Application guide
Railway applications - Fixed installations - Particular requirements for a.c. switchgear --
Part 3: Measurement, control and protection devices for specific use in a.c. traction
systems -- Section 1: Application guide
Bahnanwendungen - Ortsfeste Anlagen - Besondere Anforderungen an Wechselstrom-
Schalteinrichtungen -- Teil 3: Meß-, Steuer- und Schutzeinrichtungen für Wechselstrom-
Bahnanlagen -- Hauptabschnitt 1: Anwendungsleitfaden
Applications ferroviaires - Installations fixes - Prescriptions particulières pour
appareillage à courant alternatif -- Partie 3: Dispositifs de mesure, de commande et de
protection pour usage spécifique dans les systèmes de traction à courant alternatif --
Section 1: Guide d'application
Ta slovenski standard je istoveten z: ENV 50152-3-1:1998
ICS:
29.120.50 9DURYDONHLQGUXJD
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 50122-3:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 3: Mutual Interaction of AC and DC traction systems
EN 50122-3:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50122-2:2022(Main)
Railway applications - Fixed installations - Electrical safety, earthing and the return circuit - Part 2: Provisions against the effects of stray currents caused by DC traction systems
EN 50122-2:2022

1 - General
- adaptation of the Scope of this standard (include electrical safety related interface with vehicles, extension for electrified road transport – as shown above)
- Incorporate such small technical improvements from IEC 62128, made when transferring from previous version 50122-1, only insofar as these are essential for the coherence of the standard 50122-1
- Harmonize definitions with other railway standards (esp. EN 50119)
- check and redefine some definitions, harmonize with IEC 60050:
   o Check and harmonize terms and definitions specific to railway terminology with IEC 60050 chapters 811 and 821. If modification of a definition is essential, consider harmonization with a recent definition used in a railway specific standard and which should postdate the IEC entry.
   o Check and harmonize terms and definitions specific to electric shock with IEC60050 chapter 195 except where the terms and definitions in IEC 61140:2016 are appropriate and postdate IEC 60050 entry.
   o Check and harmonise other terms and definitions with IEC 50050 where appropriate.
- Review and ensure the document accurately and consistently uses the correct ‘verbal forms for expressions of provisions’ (according to the Internal Regulations, Part 3, clause 7), the wording used is clear and achieves good differentiation between normative and informative content.
- Review and ensure the document’s content relating to the prevention of electric shock is harmonized with basic safety publication IEC/EN 61140. In particular, the IEC/EN61140 content on fundamental rules, terminology, protective provisions (i.e. basic protection, fault protection, enhanced protective provisions).
- Review and revise clause 1 to ensure that the document’s scope is clear and accurately stated, it is harmonised with the title and only aspects falling within this scope are included within the document’s normative content. This take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards and in particular the scope of prEN 50488.
2 – Specific
- Review and modify clause 5 and harmonize its content with the relevant aspects of IEC61140, EN50124 series, prEN50488. Particular consideration to be given to the dimensioning of air clearance associated with protective provisions. This will take note of the on-going SC9XC work on coordination between SC9XC / TC9X standards.
- Review and revise clause 6, in particular the content on protective provisions to improve its alignment with basic safety publication IEC/EN 61140 content for this aspect.
- revision of Chapter 7
- Review and revise clause 10.5 to ensure that the content is fit for purpose and is coordinated with EN 50124, EN 50119 and EN5 0488 in particular, such that these standards will provide a coherent approach. This will take note of the on-going SC9XC work on coordination between these standards.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60077-4:2020(Main)
Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers
EN IEC 60077-4:2019

In addition to the general requirements of IEC 60077-2, this part of IEC 60077 gives rules for
AC circuit-breakers, the main contacts of which are connected to AC overhead contact lines;
the nominal voltage of these circuits being in accordance with IEC 60850.
This document, together with IEC 60077-2, states specifically:
a) the characteristics of the circuit-breakers;
b) the service conditions with which circuit-breakers comply with reference to:
– operation and behaviour in normal service;
– operation and behaviour in short-circuit;
– dielectric properties;
c) the tests for confirming the compliance of the components with the characteristics under
the service conditions and the methods to be adopted for these tests;
d) the information to be marked on, or given with the circuit-breaker.
NOTE 1 Circuit-breakers which are dealt with in this document can be provided with devices for automatic
opening under pre-determined conditions other than those of overcurrent, for example, undervoltage and reversal
of power flow direction. This document does not deal with the verification of operation under such predetermined
conditions.
NOTE 2 The incorporation of electronic components or electronic sub-assemblies into electrotechnical components
is now common practice.
Although this document is not applicable to electronic equipment, the presence of electronic components does not
provide a reason to exclude such electrotechnical components from the scope.
Electronic sub-assemblies included in the circuit-breakers comply with the relevant standard for electronics
(IEC 60571).
NOTE 3 Certain of these rules, after agreement between the user and the manufacturer, are used for
electrotechnical components installed on vehicles other than rail rolling stock such as mine locomotives,
trolleybuses, etc. In this case, particular additional requirements can be necessary.
This document does not cover industrial circuit-breakers which comply with IEC 62271-100.
For these, in order to ensure satisfactory operation, this document is used to specify only the
particular requirements for rolling stock. In such cases, a specific document states the
additional requirements with which the industrial circuit-breakers comply, for example:
– either to be adapted (e.g. for control voltage, environmental conditions, etc.);
– or to be installed and used so that they do not have to endure specific rolling stock
conditions;
– or to be additionally tested to prove that these components can withstand satisfactorily the
rolling stock conditions.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60077-5:2020(Main)
Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses
EN IEC 60077-5:2019

The purpose of NEN-EN-IEC 60077-5 is to give additional or amended rules for high voltage (HV) fuses as a supplement to those given by IEC 60077-2. The high voltage fuses concerned are those connected into power and/or auxiliary circuits. The nominal voltage of these circuits lies between 600 V DC and 3 000 V DC, according to IEC 60850. These fuses can also be used in auxiliary AC circuits up to a nominal voltage of 1500 V. This document together with IEC 60077-2 states specifically: a) the characteristics of the fuses; b) the service conditions with which the fuses comply with reference to: - operation and behaviour in normal service; - operation and behaviour in case of short circuit; - dielectric properties. c) the tests intended for confirming the compliance of the fuse with the characteristics under the service conditions and the methods adopted for these tests; d) the information marked on, or given with, the fuse. This document does not cover parallel connection of fuses. During preparation of this document, IEC 60269-1 and IEC 60282-1 have been considered and their requirements have been kept as far as possible. This document makes reference to the general rules for electrotechnical components given in IEC 60077-2, but for general conditions reference is made directly to IEC 60077-1.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60077-3:2020(Main)
Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers
EN IEC 60077-3:2019

In addition to the general requirements of NEN-EN-IEC 60077-2, NEN-EN-IEC 60077-3 gives the rules for circuit-breakers, the main contacts of which are connected to DC power and/or auxiliary circuits. The nominal voltage of these circuits does not exceed 3 000 V DC according to IEC 60850. This part of IEC 60077, together with IEC 60077-2, states specifically: a) the characteristics of the circuit-breakers; b) the service conditions with which circuit-breakers complies with reference to: - operation and behaviour in normal service; - operation and behaviour in the case of short circuit; - dielectric properties; c) the tests for confirming the compliance of the components with the characteristics under the service conditions and the methods to be adopted for these tests; d) the information to be marked on, or given with, the circuit breaker.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50526-3:2016(Main)
Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 3 Application guide
EN 50526-3:2016

This Application Guide supports the European Standards EN 50526 1 and EN 50526 2.
Guidance is offered on the following subjects.
–   The selection and installation of surge arresters
–   The selection and installation of voltage limiting devices as VLD-O and VLD-F.
–   The arrangement of the surge arresters and VLDs
Because of differences in the established, proven methods, electric traction systems of nominal voltage 600 V – 750 V are treated separately from the systems at higher nominal voltages.
This application guide does not treat systems different from the d.c. electrified traction systems

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50526-2:2014(Main)
Railway Applications - Fixed Installations - D.C. surge arresters and voltage limiting devices - Part 2: Voltage limiting devices
EN 50526-2:2014

This European Standard applies to Voltage Limiting Devices (VLDs) to be applied in d.c. traction systems in order to comply with protective provisions against electric shock from d.c., and mixed a.c. – d.c. voltages, in accordance with EN 50122, taking into account stray current provisions.
VLDs operate in a way as to connect the track return circuit of d.c. railway systems to earthing system or conductive parts within the overhead contact line zone or current collector zone in order to:
1)   prevent impermissible touch voltages caused by train traffic or short circuits; and/or
2)    prevent impermissible touch voltages by reducing the fault circuit impedance and thus causing tripping of the circuit breaker by overcurrent.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50526-1:2012(Main)
Railway applications - Fixed installations - D.C. surge arresters and voltage limiting devices - Part 1: Surge arresters
EN 50526-1:2012

This European Standard applies to non-linear metal-oxide resistor type surge arresters without spark gaps designed to limit voltage surges on d.c. systems with nominal voltage up to 3 kV.

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60077-5:2004(Main)
Railway applications - Electrotechnical equipment for rolling stock -- Part 5: Electrotechnical components - Rules for HV fuses
EN 60077-5:2003

Gives additional or amended rules for high voltage fuses as a supplement to those given by EN 60077-2. States specifically the characteristics of the fuses, their service conditions, the tests to be performed, and the markings.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62423:2013/A12:2023(Amendment)
Type F and type B residual current operated circuit-breakers with and without integral overcurrent protection for household and similar uses
EN 62423:2012/A12:2022

The scope of EN 61008-1 and EN 61008-2-1 or EN 61009-1 and EN 61009-2-1 applies with the following additions.
This standard specifies requirements and tests for Type F and Type B RCDs (Residual current devices). Requirements and tests given in this standard are in addition to the requirements of Type A residual current devices according to EN 61008-2-1 or EN 61009-2-1. This standard can only be used together with EN 61008-1 and EN 61009-1.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day