iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

kSIST-TS FprCEN/TS 17471:2020

(Main)

Cranes - Loader cranes - Interface between loader cranes and work platforms

Cranes - Loader cranes - Interface between loader cranes and work platforms

This document gives technical information for dual purpose machines that comply with both EN 12999:2011+A2:2018 and EN 280:2013+A1:2015 and deals with the specific aspects related to the fitting and interface of a work platform that is an interchangeable equipment to the base machine.
Loader cranes which are equipped with work platforms as interchangeable equipment are regarded as Mobile Elevating Work Platforms (MEWPs) as defined in 3.1 of EN 280:2013+A1:2015 and are classified as Group B Type 1 as specified in 1.4 of EN 280:2013+A1:2015 and are listed under Annex IV, item 17 of the Machinery Directive 2006/42/EC.
This document does not address hazards which may occur:
a)   when handling suspended work platforms which may swing freely;
b)   when using non-integrated work platforms or other attachments not intended for the lifting of persons.

Krane - Interface zwischen Ladekran und Arbeitsbühne

Dieses Dokument enthält technische Informationen für kombinierte Maschinen nach EN 12999:2011+A2:2018 und nach EN 280:2013+A1:2015, und behandelt die besonderen Aspekte in Zusammenhang mit der Montage und dem Anschluss einer Arbeitsbühne, die ein austauschbares Arbeitsgerät der Hauptmaschine darstellt.
Ladekrane, die mit Arbeitsbühnen in Form von austauschbaren Arbeitsgeräten versehen sind, werden nach EN 280:2013+A1:2015, 3.1 als fahrbare Hubarbeitsbühnen (FHAB) bezeichnet, in Gruppe B, Typ 1 nach EN 280:2013+A1:2015, 1.4 eingestuft und unter Punkt 17 im Anhang IV der Maschinen-richtlinie 2006/42/EG aufgeführt.
Dieses Dokument enthält keine Anforderungen hinsichtlich der Gefährdungen, die entstehen können:
a)   durch das Befördern hängender Arbeitsbühnen, die frei pendeln können;
b)   durch die Benutzung von nicht integrierten Arbeitsbühnen oder anderen nicht für die Personen-beförderung bestimmten Einrichtungen.

Appareils de levage à charge suspendue- Grues de chargement - Interface entre les grues de chargement et les plates-formes de travail

Le présent document fournit des informations techniques sur les machines à double usage qui sont conformes à la fois à l’EN 12999:2011+A2:2018 et à l’EN 280:2013+A1:2015, et il traite des aspects spécifiques liés au raccordement et à l’interface d’une plate-forme de travail, qui est un équipement interchangeable, avec la machine de base.
Les grues de chargement qui sont équipées de plates-formes de travail en tant qu’équipements interchangeables sont considérées comme des plates-formes élévatrices mobiles de personnel (PEMP) telles que définies en 3.1 de l’EN 280:2013+A1:2015, sont classées dans le Groupe B Type 1 comme spécifié en 1.4 de l’EN 280:2013+A1:2015 et figurent dans l’Annexe IV, article 17 de la Directive Machines 2006/42/CE.
Le présent document ne traite pas des phénomènes dangereux pouvant se produire :
a)   lors de la manutention de plates-formes de travail suspendues qui peuvent se balancer librement ;
b)   lors de l’utilisation de plates-formes de travail non intégrées ou autres accessoires non prévus pour le levage de personnes.

Žerjavi - Nakladalni žerjavi - Vmesnik med nakladalnimi žerjavi in delovnimi ploščadmi

General Information

Status
Not Published
Public Enquiry End Date
30-Mar-2020
ICS
53.020.20 - Cranes
Technical Committee
DTN - Lift and transport appliances
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
17-Nov-2022
Due Date
22-Nov-2022
Completion Date
17-Nov-2022
Ref Project
FprCEN/TS 17471 - Cranes - Loader cranes - Interface between loader cranes and work platforms

Buy Standard

kTS FprCEN/TS 17471:2020kTS FprCEN/TS 17471:2020
PreviousNext
Draft
kTS FprCEN/TS 17471:2020
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
kSIST-TS FprCEN/TS 17471:2020
01-marec-2020
Žerjavi - Nakladalni žerjavi - Vmesnik med nakladalnimi žerjavi in delovnimi
ploščadmi
Cranes - Loader cranes - Interface between loader cranes and work platforms
Krane - Interface zwischen Ladekran und Arbeitsbühne
Appareils de levage à charge suspendue- Grues de chargement - Interface entre les
grues de chargement et les plates-formes de travail
Ta slovenski standard je istoveten z: FprCEN/TS 17471
ICS:
53.020.20 Dvigala Cranes
kSIST-TS FprCEN/TS 17471:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
kSIST-TS FprCEN/TS 17471:2020

---------------------- Page: 2 ----------------------
kSIST-TS FprCEN/TS 17471:2020


FINAL DRAFT
TECHNICAL SPECIFICATION
FprCEN/TS 17471
SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION

January 2020
ICS
English Version

Cranes - Loader cranes - Interface between loader cranes
and work platforms
Appareils de levage à charge suspendue- Grues de Krane - Interface zwischen Ladekran und Arbeitsbühne
chargement - Interface entre les grues de chargement
et les plates-formes de travail


This draft Technical Specification is submitted to CEN members for Vote. It has been drawn up by the Technical Committee
CEN/TC 147.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a Technical Specification. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a Technical Specification.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprCEN/TS 17471:2020 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
kSIST-TS FprCEN/TS 17471:2020
FprCEN/TS 17471:2020 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Safety requirements . 5
4.1 Mode of operation . 5
4.1.1 General . 5
4.1.2 Manual control device . 6
4.1.3 Automatic control device . 6
4.2 Transport position . 6
4.3 Cables and connections . 6
4.4 Locking of the work platform . 6
5 Verification of requirements . 7
5.1 Work platform as interchangeable equipment . 7
5.2 Work platform as integral part of the dual-purpose machine . 7

2

---------------------- Page: 4 ----------------------
kSIST-TS FprCEN/TS 17471:2020
FprCEN/TS 17471:2020 (E)
European foreword
This document (FprCEN/TS 17471:2020) has been prepared by Technical Committee CEN/TC 147,
“Cranes – Safety”, the secretariat of which is held by BSI.
This document is currently submitted to the Vote on TS.
3

---------------------- Page: 5 ----------------------
kSIST-TS FprCEN/TS 17471:2020
FprCEN/TS 17471:2020 (E)
Introduction
This document provides one means to define the technical characteristic of the loader crane and the work
platform to create a MEWP by combining them and thereby to conform to the essential health and safety
requirements of the Machinery Directive 2006/42/EC.
The machinery concerned and the extent to which hazards are covered are indicated in the scope of this
document.
4

---------------------- Page: 6 ----------------------
kSIST-TS FprCEN/TS 17471:2020
FprCEN/TS 17471:2020 (E)
1 Scope
This document gives technical information for dual purpose machines that comply with both
EN 12999:2011+A2:2018 and EN 280:2013+A1:2015 and deals with the specific aspects related to the
fitting and interface of a work platform that is an interchangeable equipment to the bas
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 13001-3-6:2018+A1:2021(Main)
Cranes - General design - Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders
EN 13001-3-6:2018+A1:2021

This document is to be used together with the other generic parts of EN 13001 series of standards, see Annex E, as well as pertinent crane type product EN standards, and as such they specify general conditions, requirements and methods to, by design and theoretical verification, prevent mechanical hazards of hydraulic cylinders that are part of the load carrying structures of cranes. Hydraulic piping, hoses and connectors used with the cylinders are not within the scope of this document, as well as cylinders made from other material than carbon steel.
NOTE 1   Specific requirements for particular crane types are given in the appropriate European product standards, see Annex E.
The significant hazardous situations and hazardous events that could result in risks to persons during intended use are identified in Annex F. Clauses 4 to 7 of this document provide requirements and methods to reduce or eliminate these risks:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   elastic instability (column buckling).
NOTE 2   EN 13001-3-6 deals only with the limit state method in accordance with EN 13001-1.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13001-3-5:2016+A1:2021(Main)
Cranes - General design - Part 3-5: Limit states and proof of competence of forged and cast hooks
EN 13001-3-5:2016+A1:2021

This European Standard is to be used together with EN 13001-1 and EN 13001-2 and, as such, they specify general conditions, requirements and methods to prevent by design and theoretical verification, mechanical hazards in crane hooks.
This European Standard covers the following parts of hooks and types of hooks:
-   bodies of any type of hooks made of steel forgings;
-   machined shanks of hooks with a thread/nut suspension.
Principles of this European Standard can be applied to machined shanks of hooks in general. However, stress concentration factors relevant to designs not given in this standard would have to be determined and applied.
NOTE 1   Cast hooks and plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this European Standard.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clauses 4 to 8 of this document are necessary to reduce or eliminate the risks associated with the following hazards:
a)   exceeding the limits of strength (yield, ultimate, fatigue);
b)   exceeding temperature limits of material.
The requirements of this European Standard are stated in the main body of the document and are applicable to forged hook designs in general.
The commonly used hook body and shank designs listed in Annexes A, B and F are only examples and should not be referred to as requirements of this European Standard. Annex I gives guidance for the selection of a hook size, where a hook body is in accordance with Annex A or B. The selection of hook form is not limited to those shown in Annexes A and B.
This European Standard is applicable to cranes, which are manufactured after the date of approval of this European Standard by CEN, and serves as a reference base for product standards of particular crane types.
NOTE 2   This part of EN 13001 deals only with the limit state method in accordance with EN 13001-1.
FprA1:
Add after 1st paragraph the following sentence:
"
It has to be used together with the other generic parts of EN 13001 series of standards, see Annex L.
".
Replace in 2nd paragraph the 1st list item with:
"
-   bodies of any type of hooks made of steel forgings or steel castings, including stainless steel;".
Replace NOTE 1 with:
"
NOTE 1   Plate hooks, which are those, assembled of one or several parallel parts of rolled steel plates, are not covered in this document.".
In the 4th paragraph, replace the 1st list item with:
"
a)   exceeding the limits of yield strength, ultimate strength, fatigue strength, brittle fracture;".
Replace the 5th paragraph with:
"The requirements of this document are stated in the main body of the document and are applicable to hook designs in general.".
After 4th paragraph, add the sentence:
"
The hazards covered by this document are identified by Annex M.
".

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13001-2:2021(Main)
Crane safety - General design - Part 2: Load actions
EN 13001-2:2021

This document specifies load actions to be used together with the standards EN 13001 1 and EN 13001 3, and as such they specify conditions and requirements on design to prevent mechanical hazards of cranes, and provides a method of verification of those requirements.
NOTE   Specific requirements for particular types of crane are given in the appropriate European Standard for the particular crane type.
The following is a list of significant hazardous situations and hazardous events that could result in risks to persons during normal use and foreseeable misuse. Clause 4 of this document is necessary to reduce or eliminate the risks associated with the following hazards:
a)   instability of the crane or its parts (tilting);
b)   exceeding the limits of strength (yield, ultimate, fatigue);
c)   elastic instability of the crane or its parts (buckling, bulging);
d)   exceeding temperature limits of material or components;
e)   exceeding the deformation limits.
This document is not applicable to cranes that are manufactured before the date of its publication as EN.

  • Standard
    75 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13852-3:2021(Main)
Cranes - Offshore cranes - Part 3: Light offshore cranes
EN 13852-3:2021

This document applies to light offshore cranes including their supporting pedestals and structures.
NOTE   The supporting pedestal and structures such as columns and boom rests are covered by this standard to the extent where their main purpose is to support the crane.
This document is applicable to light offshore cranes, whose structures are made of steel.
The following characteristics distinguish light offshore cranes from other types of offshore cranes:
-   maximum rated capacity 20 tonnes, maximum load moment 300 tm;
-   limitation for off-board lifting operation Hs = 2,0 m and wind speed 15 m/s (3s gust);
-   maximum number of working cycles class U3 (C ≤ 125.000) according to EN 13001-1.
This document gives requirements for all significant hazards, hazardous situations and events relevant to light offshore cranes, when used as intended and under conditions foreseen by the risk assessment (see Clause 4).
This document is not applicable for:
a)   transportation, assembly, disabling, scrapping or changing the configuration of the crane;
b)   non- fixed load lifting attachments, i.e. any item between the hook and the load;
c)   lifting operations in ambient temperatures below −20 °C;
d)   lifting operations in ambient temperatures above 45 °C;
e)   lifting operations involving more than one crane;
f)   accidental loads due to collisions or earthquakes;
g)   emergency personnel rescue operations (except training);
h)   subsea lifting operations;
i)   general purpose offshore cranes, floating cranes and motion compensated cranes.
This document is applicable for the lifting of personnel.
This document is applicable to light offshore cranes, which are manufactured after the date of approval by CEN of this document.

  • Standard
    111 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    95 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 13586:2021(Main)
Cranes - Access
EN 13586:2020

This European Standard specifies design requirements for non-powered access installed on cranes.
NOTE 1 For other type of access a requirement for information to be supplied is specified.
This European Standard covers access to control stations and all access required for maintenance, certain erection
and dismantling operations (see below) and emergency.
For those cranes which are intended to be erected and dismantled at their places of work, specific requirements for the
access needed during these operations are given in the appropriate European Standards for specific crane types.
NOTE 2 Specific requirements for access on particular types of crane are given in the appropriate European Standard for the
particular crane type.
The dimensions given in this European Standard do not take into account the safety distances related to:
- guarding;
-  relative movement between crane and adjacent structure;
- hazardous surface temperature;
- electrical equipment.
The significant hazards covered by this European Standard are identified in clause 4.
This European Standard is not applicable to cranes which are manufactured before the date of publication by CEN of
this standard.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17076:2021(Main)
Tower cranes - Anti-collision systems - Safety requirements
EN 17076:2020

This European Standard specifies the functional requirements of anti-collision devices and systems installed on self-erecting tower cranes or tower cranes assembled from component parts to avoid the risks of collision between several cranes in use, between a crane in use and fixed obstacles, and over prohibited zones.
It applies to anti-collision devices manufactured after the publication of this standard.
NOTE   For anti-collision systems used to avoid the risk of collision with power lines, additional requirements might be necessary.
This document defines the safety characteristics and requirements of anti-collision devices and systems intended for installation on self-erecting tower cranes or tower cranes assembled from component parts.
In particular:
-   performance level;
-   information to be provided by the sensors installed on the crane;
-   operation, particularly in the event of failure, override and free jib slewing states of a crane;
-   type of communication between devices;
-   information for the crane operator and outside indicator.
It also specifies the requirements for marking the device or the system and the content of the instruction for use.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16851:2017+A1:2021(Main)
Cranes - Light crane systems
EN 16851:2017+A1:2020

This document applies to:
-   light crane systems, either suspended or free-standing systems, where the rated capacity of any single lifting device is 4 t or less;
-   pillar and wall-mounted jib cranes, without an operator's cabin, whose rated capacity is 10 t or less and whose overturning load moment is 500 kNm or less.
NOTE   For illustration of crane types, see Annex B.
This document is not applicable to cranes covered by another product specific crane standard, e.g. EN 15011:2011+A1:2014 or EN 14985:2012.
This document is applicable to cranes and crane systems, whose structures are made of steel or aluminium, excluding aluminium structures containing welded joints.
This document gives requirements for all significant hazards, hazardous situations and events relevant to cranes, when used as intended and under conditions foreseen by the manufacturer (see Clause 4).
The specific hazards due to potentially explosive atmospheres, ionizing radiation, operation in electro-magnetic fields beyond the range of EN 61000 6 2:2016 and operation in pharmacy or food industry are not covered by this document.
This document does not cover hazards related to the lifting of persons.
This document is applicable to cranes, which are manufactured after the date of its publication by CEN as a European Standard.
This document is not applicable to cranes manufactured before the date of its publication.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 15011:2021(Main)
Cranes - Bridge and gantry cranes
EN 15011:2020

This European Standard applies to bridge and gantry cranes able to travel by wheels on rails, runways or roadway surfaces, and to gantry cranes without wheels mounted in a stationary position.
This European Standard specifies requirements for all significant hazards, hazardous situations and events relevant to bridge and gantry cranes when used as intended and under conditions foreseen by the manufacturer (see Clause 4).
This European Standard does not include requirements for the lifting of persons.
The specific hazards due to potentially explosive atmospheres, ionising radiation and operation in electromagnetic fields beyond the range of EN 61000-6-2 are not covered by this European Standard.
This European Standard is applicable to bridge and gantry cranes manufactured after the date of its publication as an EN.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12999:2020(Main)
Cranes - Loader cranes
EN 12999:2020

This document specifies minimum requirements for design, calculation, examinations and tests of hydraulic powered loader cranes and their mountings on vehicles or static foundations.
This document does not apply to loader cranes used on board sea going vessel or to articulated boom system cranes which are designed as total integral parts of special equipment such as forwarders.
The hazards covered by this standard are identified in Clause 4.
This document does not cover hazards related to the lifting of persons.
NOTE   The use of cranes for lifting of persons can be subject to specific national regulations.
This document is not applicable to loader cranes manufactured before the publication of this document. For loader cranes designed before the publication of this document, the new provisions concerning stress calculations are not applicable.

  • Standard
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 4305:2015/Amd 1:2020(Amendment)
Mobile cranes - Determination of stability
ISO 4305:2014/Amd 1:2016
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off
  • Amendment
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day