iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST HD 554 S1:1995

(Main)

Voltage transformers

Voltage transformers

CM prepared by BTTF 56-3 * Superseded by EN 60044-2:1999 and EN 60044-5:2004

Spannungswandler

Transformateurs de tension

Voltage transformers (IEC 186:1987 + A1:1988, modified)

General Information

Status
Withdrawn
Publication Date
30-Sep-1995
Withdrawal Date
16-Apr-2008
ICS
29.200 - Rectifiers. Convertors. Stabilized power supply
Technical Committee
MTR - Instrument transformers
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
28-Jan-2008
Due Date
20-Feb-2008
Completion Date
17-Apr-2008
Ref Project
HD 554 S1:1992 - Voltage transformers

Relations

Revised
SIST EN 60044-5:2005 - Instrument transformers -- Part 5: Capacitor voltage transformers
Effective Date
13-May-2010
Replaced By
SIST EN 60044-2:2001 - Instrument transformers -- Part 2: Inductive voltage transformers
Effective Date
06-May-2014
Replaced By
SIST EN 60044-2:2001 - Instrument transformers -- Part 2: Inductive voltage transformers
Effective Date
29-Jan-2023
Replaced By
SIST EN 60044-5:2005 - Instrument transformers -- Part 5: Capacitor voltage transformers
Effective Date
29-Jan-2023
Replaced By
SIST EN 60044-2:2001 - Instrument transformers -- Part 2: Inductive voltage transformers
Effective Date
07-Jun-2022
Replaced By
SIST EN 60044-5:2005 - Instrument transformers -- Part 5: Capacitor voltage transformers
Effective Date
07-Jun-2022
Replaced By
SIST EN 60044-5:2005 - Instrument transformers -- Part 5: Capacitor voltage transformers
Effective Date
01-May-2008

Buy Standard

HD 554 S1:1995HD 554 S1:1995
PreviousNext
Standardization document
HD 554 S1:1995
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST HD 554 S1:1995
01-oktober-1995
Voltage transformers (IEC 186:1987 + A1:1988, modified)
Voltage transformers
Spannungswandler
Transformateurs de tension
Ta slovenski standard je istoveten z: HD 554 S1:1992
ICS:
29.200 8VPHUQLNL3UHWYRUQLNL Rectifiers. Convertors.
6WDELOL]LUDQRHOHNWULþQR Stabilized power supply
QDSDMDQMH
SIST HD 554 S1:1995 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 2 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 3 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 4 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 5 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 6 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 7 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 8 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 9 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 10 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 11 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 12 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 13 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 14 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 15 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 16 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 17 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 18 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 19 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 20 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 21 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 22 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 23 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 24 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 25 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 26 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 27 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 28 ----------------------

SIST HD 554 S1:1995

---------------------- Page: 29 --
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 62927:2018/A1:2023(Amendment)
Amendment 1 - Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing (IEC 62927:2017/AMD1:2023)
EN 62927:2017/A1:2023
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62109-3:2023(Main)
Safety of power converters for use in photovoltaic power systems - Part 3: Particular requirements for electronic devices in combination with photovoltaic elements
EN IEC 62109-3:2022

IEC 62109-3:2020 covers the particular safety requirements for electronic elements that are mechanically and/or electrically incorporated with photovoltaic (PV) modules or systems.
Mechanically and/or electrically incorporated means that the whole combination of electronic device with the photovoltaic element is sold as one product. Nevertheless, tests provided in this document may also be used to evaluate compatibility of PV modules and electronic devices that are sold separately and are intended to be installed close to each other.
The purpose of the requirements of this document is to provide additional safety-related testing requirements for the following types of integrated electronics, collectively referred to as module integrated equipment (MIE):
a) Type A MIE where the PV element can be evaluated as a PV module according to IEC 61730-1 and IEC 61730‑2 independently from the electronic element;
b) Type B MIE where the PV element cannot be evaluated as a PV module according to IEC 61730-1 and IEC 61730-2 independently from the electronic element.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60700-3:2023(Main)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 3: Essential ratings (limiting values) and characteristics
EN IEC 60700-3:2023

This part of IEC 60700 specifies the service conditions, the definitions of essential ratings and characteristics of thyristor valves utilized in line commutated converters with three-phase bridge connections to realize the conversion from AC to DC and vice versa for high voltage direct current (HVDC) power transmission applications. It is applicable for air insulated, liquid cooled and indoor thyristor valves.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 63254:2023(Main)
Management and interfaces for WPT - Device-to-device wireless charging (D2DWC) for mobile devices with wireless power TX/RX module (IEC 63254:2022)
EN IEC 63254:2022

This standard defines specification and control protocol of D2DWC module for using wireless power TX and RX functions by only one single device. And the related antenna physical design examples are presented in Annex A for sharing information. This standard propose D2DWC module circuit requirement which are consisted with the D2DWC main AP, D2DWC IC, EMT/WPT Antenna Unit and PMIC unit. In the Chapter 5, ‘Specifications and control protocol of D2DWC’, the register information and message protocols for WPT control are defined in order to implement the WPT TX function. In this standard, the interface and protocol in the wireless power process of the mobile device can be used in accordance with the corresponding wireless power transfer standard. Any wireless power transfer standard working inside 100 - 350 kHz frequency range can be included from the scope of this standard. This standard can be used to mobile wireless power transfer in mobile phones and other mobile devices, IoT, and micro-sensor industries and related application fields.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62751-1:2014/A2:2022(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 1: General requirements (IEC 62751-1:2014/AMD2:2022)
EN 62751-1:2014/A2:2022
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50171:2022(Main)
Central safety power supply systems
EN 50171:2021

This European Standard specifies the general requirements for central power supply systems for an independent energy supply to essential safety equipment. This standard covers systems that are permanently connected to AC supply voltages not exceeding 1 000 V and use batteries as an alternative power source.
Central safety power supply systems are intended to ensure energy supply to emergency escape lighting in the event of normal supply failure and may be suitable for energising other essential safety equipment, for example:
- electric circuits of automatic fire extinguishing installations;
- paging systems and signalling safety installations;
- smoke extraction equipment;
- carbon monoxide warning systems;
- special safety installations related to specific buildings, e.g. high-risk areas.
The power supply of CPS should be dedicated only to the essential safety equipment, and not for other typeof loads such as general purpose IT or industrial systems etc.
Combinations of the aforementioned safety equipment types and / or non-safety equipment loads are permitted together on the same central safety power supply system providing the availability for safety equipment loads is not impaired. A fault occurring in a circuit should not cause the interruption in any other circuit used to supply safety equipment.
Schematic representations of typical central safety power supply equipment are depicted in Clause 4.
Power supply systems for fire alarm equipment that are covered by EN 54 (series) are excluded.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60700-1:2015/A1:2022(Amendment)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:2015/AMD1:2021)
EN 60700-1:2015/A1:2021

No scope available

  • Amendment
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60335-2-29:2022/A1:2022(Amendment)
Household and similar electrical appliances - Safety - Part 2-29 - Particular requirements for battery chargers
EN 60335-2-29:2021/A1:2021

This European Standard deals with the safety of electric battery chargers for household use having an output at safety extra-low voltage, their rated voltage being not more than 250 V.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 60700-2:2017/A1:2021(Amendment)
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 2: Terminology (IEC 60700-2:2016/AMD1:2021)
EN 60700-2:2016/A1:2021

No scope available

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 62040-3:2021(Main)
Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements (IEC 62040-3:2021)
EN IEC 62040-3:2021

IEC 62040-3:2011 applies to movable, stationary and fixed electronic uninterruptible power systems (UPS) that deliver single or three phase fixed frequency a.c. output voltage not exceeding 1 000 V a.c. and that incorporate an energy storage system, generally connected through a d.c. link. This standard is intended to specify performance and test requirements of a complete UPS and not of individual UPS functional units. The individual UPS functional units are dealt with in IEC publications referred to in the bibliography that apply so far that they are not in contradiction with this standard. The primary function of the UPS covered by this standard is to ensure continuity of an a.c. power source. The UPS may also serve to improve the quality of the power source by keeping it within specified characteristics. UPS have been developed over a wide range of power, from less than hundred watts to several megawatts, to meet requirements for availability and quality of power to a variety of loads. Refer to Annexes A and B for information on typical UPS configurations and topologies. This standard also covers UPS test and performance when power switches form integral part of a UPS and are associated with its output. Included are interrupters, bypass switches, isolating switches, and tie switches. These switches interact with other functional units of the UPS to maintain continuity of load power. This standard does not cover:
- conventional a.c. input and output distribution boards or d.c. boards and their associated switches (e.g. switches for batteries, rectifier output or inverter input);
- stand-alone static transfer systems covered by IEC 62310-3;
- systems wherein the output voltage is derived from a rotating machine.
NOTE 1  This standard recognises that power availability to information technology (IT) equipment represents a major UPS application. The UPS output characteristics specified in this standard are therefore also aimed at ensuring compatibility with the requirements of IT equipment. This, subject any limitation stated in the manufacturer's declaration, includes requirements for steady state and transient voltage variation as well as for the supply of both linear and non-linear load characteristics of IT equipment.
NOTE 2  Test loads specified in this standard simulate both linear and non-linear load characteristics. Their use is prescribed with the objective of verifying design and performance, as declared by the manufacturer, and also of minimising any complexity and energy consumption during the tests.
NOTE 3  This standard is aimed at 50 Hz and 60 Hz applications but does not exclude other frequency applications within the domain of IEC 60196. This is subject to an agreement between manufacturer and purchase in respect to any particular requirements arising.
NOTE 4  Single phase and three-phase voltage UPS covered by this standard include without limitation UPS supplying single-phase, two-wire; single-phase, three-wire; two-phase, three-wire, three-phase, three-wire and three-phase, four-wire loads.
This second edition cancels and replaces first edition published in 1999 and constitutes a technical revision. The significant technical changes are:
- reference test load - definition and application revised (3.3.5 and 6.1.1.3);
- test schedule - presented as a single table grouped by revised type and routine tests (see 6.1.6, Table 3);
- dynamic output voltage performance characteristics - guidance to measure - addition (Annex H);
- UPS efficiency - requirements and methods of measure - addition (Annexes I and J);
- functional availa

  • Standard
    98 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    89 pages
    English language
    sale 10% off
    e-Library read for
    1 day