SIST EN 16284:2013

Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane

This European Standard is applicable to plastic and laminate tubes which have a peal-off membrane for tamperevidence purposes. This membrane is made of either aluminium or plastic. A test is performed to ensure that the consumer can remove the membrane without excessive force leading to a completely opened orifice.

Packmittel - Laminat- und Kunststofftuben - Prüfverfahren zur Bestimmung der Haftkraft der Membran

Kunststoff- und Laminattuben verfügen über eine Abreißmembran zur Originalitätssicherung. Diese Membran wird entweder aus Aluminium oder Kunststoff hergestellt. Eine Prüfung wird durchgeführt, um die Unversehrtheit der Membran und die Abziehbarkeit ohne übermäßige Krafteinwirkung durch den Verbraucher sicherzustellen.

Emballage - Tubes souples plastiques et tubes souples laminés - Méthode d'essai pour déterminer la force d'adhérence de la membrane

La présente Norme européenne est applicable aux tubes plastiques et aux tubes laminés qui comportent une membrane pelable servant de témoin de violabilité. Cette membrane est en aluminium ou en plastique. Un essai est effectué pour s'assurer que le consommateur peut retirer la membrane sans effort excessif pour obtenir un orifice complètement ouvert.

Embalaža - Prožne laminatne in plastične tube - Preskusne metode za določanje sile lepljivosti membrane

Ta evropski standard velja za plastične in laminatne tube z odstranljivo membrano za namene nedovoljenega spreminjanja. Ta membrana je izdelana iz aluminija ali plastike. Izveden je bil preskus za zagotovitev, da potrošnik lahko odstrani membrano brez prekomerne sile, s katero bi povzročil popolno odprtje odprtine.

General Information

• Status: Published
• Public Enquiry End Date: 31-Aug-2011
• Publication Date: 21-Apr-2013
• ICS: 55.120 - Cans. Tins. Tubes
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 03-Apr-2013
• Due Date: 08-Jun-2013
• Completion Date: 22-Apr-2013
• Ref Project: EN 16284:2013 - Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Packmittel - Laminat- und Kunststofftuben - Prüfverfahren zur Bestimmung der Haftkraft der MembranEmballage - Tubes souples plastiques et tubes souples laminés - Méthode d'essai pour déterminer la force d'adhérence de la membranePackaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane55.120Cans. Tins. TubesICS:Ta slovenski standard je istoveten z:EN 16284:2013SIST EN 16284:2013en,fr,de01-maj-2013SIST EN 16284:2013SLOVENSKI
STANDARD



SIST EN 16284:2013



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16284
February 2013 ICS 55.120 English Version
Packaging - Flexible laminate and plastic tubes - Test method to determine the adhesive strength of the membrane
Emballage - Tubes souples plastiques et tubes souples laminés - Méthode d'essai pour déterminer la force d'adhérence de la membrane
Packmittel - Laminat- und Kunststofftuben - Prüfverfahren zur Bestimmung der Haftkraft der Membran This European Standard was approved by CEN on 21 December 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16284:2013: ESIST EN 16284:2013



EN 16284:2013 (E) 2 Contents Page Foreword . 3 1 Scope . 4 2 Equipment . 4 3 Method of operation . 5 4 Interpretation of results .
...