SIST EN ISO 17232:2017
(Main)Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2017)
Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2017)
This document specifies two methods for determining the heat resistance of patent leather.
Method A makes use of a modified lastometer, while Method B uses the “Zwik” apparatus. Both methods
are applicable to patent leathers for all end uses.
Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wärmebeständigkeit von Lackleder (ISO 17232:2017)
Cuir - Essais physiques et mécaniques - Détermination de la résistance à la chaleur des cuirs vernis (ISO 17232:2017)
ISO 17232:2017 spécifie deux méthodes permettant de déterminer la résistance à la chaleur du cuir vernis.
La méthode A met en ?uvre un lastomètre modifié, tandis que la méthode B utilise l'appareillage Zwik. Ces deux méthodes sont applicables aux cuirs vernis quelles que soient leurs utilisations finales.
Usnje - Fizikalni in mehanski preskusi - Ugotavljanje odpornosti lakastega usnja proti vročini (ISO 17232:2017)
Ta dokument določa metodi za ugotavljanje odpornosti lakastega usnja proti vročini. Metoda A predvideva uporabo modificiranega lastometra, metoda B pa aparata »Zwik«. Obe metodi se uporabljata za lakasto usnje za vse vrste končne uporabe.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17232:2017
01-maj-2017
1DGRPHãþD
SIST EN ISO 17232:2009
8VQMH)L]LNDOQLLQPHKDQVNLSUHVNXVL8JRWDYOMDQMHRGSRUQRVWLODNDVWHJDXVQMD
SURWLYURþLQL ,62
Leather - Physical and mechanical tests - Determination of heat resistance of patent
leather (ISO 17232:2017)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Wärmebeständigkeit von Lackleder (ISO 17232:2017)
Cuir - Essais physiques et mécaniques - Détermination de la résistance à la chaleur des
cuirs vernis (ISO 17232:2017)
Ta slovenski standard je istoveten z: EN ISO 17232:2017
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 17232:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17232:2017
---------------------- Page: 2 ----------------------
SIST EN ISO 17232:2017
EN ISO 17232
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2017
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 17232:2009
English Version
Leather - Physical and mechanical tests - Determination of
heat resistance of patent leather (ISO 17232:2017)
Cuir - Essais physiques et mécaniques - Détermination Leder - Physikalische und mechanische Prüfungen -
de la résistance à la chaleur des cuirs vernis (ISO Bestimmung der Wärmebeständigkeit von Lackleder
17232:2017) (ISO 17232:2017)
This European Standard was approved by CEN on 5 January 2017.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17232:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17232:2017
EN ISO 17232:2017 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17232:2017
EN ISO 17232:2017 (E)
European foreword
This document (EN ISO 17232:2017) has been prepared by Technical Committee IULTCS "International
Union of Leather Technologists and Chemists Societies" in collaboration with Technical Committee
CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall
be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 17232:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17232:2017 has been approved by CEN as EN ISO 17232:2017 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 17232:2017
---------------------- Page: 6 ----------------------
SIST EN ISO 17232:2017
INTERNATIONAL ISO
STANDARD 17232
IULTCS/IUP 38
Second edition
2017-02
Leather — Physical and mechanical
tests — Determination of heat
resistance of patent leather
Cuir — Essais physiques et mécaniques — Détermination de la
résistance à la chaleur des cuirs vernis
Reference numbers
ISO 17232:2017(E)
IULTCS/IUP 38:2017(E)
©
ISO 2017
---------------------- Page: 7 ----------------------
SIST EN ISO 17232:2017
ISO 17232:2017(E)
IULTCS/IUP 38:2017(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2017 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 17232:2017
ISO 17232:2017(E)
IULTCS/IUP 38:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Method A — Lastometer method . 1
4.1 Principle . 1
4.2 Apparatus . 1
4.3 Sampling and sample preparation . 2
4.4 Procedure . 2
4.5 Test report . 3
5 Method B — Zwik method. 3
5.1 Principle . 3
5.2 Apparatus . 3
5.3 Sampling and sample preparation . 5
5.4 Procedure . 5
5.5 Test report . 5
Annex A (informative) Sources of apparatus . 7
© ISO 2017 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 17232:2017
ISO 17232:2017(E)
IULTCS/IUP 38:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity assessment,
as well as information about ISO’s adherence to the World Trade Organization (WTO) principles in the
Technical Barriers to Trade (TBT) see the following URL: www . i so .org/ iso/ foreword .html.
IULTCS, originally formed in 1897, is a world-wide organization of professional leather societies to
further the advancement of leather science and technology. IULTCS has three Commissions, which
are responsible for establishing international methods for the sampling and testing of leather. ISO
recognizes IULTCS as an international standardizing body for the preparation of test methods for
leather.
ISO 17232 was prepared by the European Committee for Standardization (CEN) Technical Committee
CEN/TC 289, Leather, the secretariat of which is held by UNI, in collaboration with the Physical
Test Commission of the International Union of Leather Technologists and Chemists Societies (IUP
Commission, IULTCS), in accordance with the Agreement on technical cooperation between ISO and
CEN (Vienna Agreement).
It is based on IUP 38 published in J. Soc. Leather Tech. Chem., 84 (7), p. 403, (2000), and declared an
official method of the IULTCS in March 2001.
This second edition cancels and replaces the first edition (ISO 17232:2006), which has been technically
revised with the following changes:
— the test conditions in 4.4.4 have been clarified;
— a reference to specific standard conditions in 4.5 e) and 5.5 d) has been removed.
iv © ISO 2017 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 17232:2017
ISO 17232:2017(E)
INTERNATIONAL STANDARD
IULTCS/IUP 38:2017(E)
Leather — Physical and mechanical tests — Determination
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.