EN ISO 17232:2017

Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2017)

ISO 17232:2017 specifies two methods for determining the heat resistance of patent leather.
Method A makes use of a modified lastometer, while Method B uses the "Zwik" apparatus. Both methods are applicable to patent leathers for all end uses.

Leder - Physikalische und mechanische Prüfungen - Bestimmung der Wärmebeständigkeit von Lackleder (ISO 17232:2017)

Cuir - Essais physiques et mécaniques - Détermination de la résistance à la chaleur des cuirs vernis (ISO 17232:2017)

ISO 17232:2017 spécifie deux méthodes permettant de déterminer la résistance à la chaleur du cuir vernis.
La méthode A met en ?uvre un lastomètre modifié, tandis que la méthode B utilise l'appareillage Zwik. Ces deux méthodes sont applicables aux cuirs vernis quelles que soient leurs utilisations finales.

Usnje - Fizikalni in mehanski preskusi - Ugotavljanje odpornosti lakastega usnja proti vročini (ISO 17232:2017)

Ta dokument določa metodi za ugotavljanje odpornosti lakastega usnja proti vročini. Metoda A predvideva uporabo modificiranega lastometra, metoda B pa aparata »Zwik«. Obe metodi se uporabljata za lakasto usnje za vse vrste končne uporabe.

General Information

• Status: Published
• Publication Date: 14-Feb-2017
• Withdrawal Date: 30-Aug-2017
• ICS: 59.140.30 - Leather and furs
• Technical Committee: CEN/TC 289 - Leather
• Drafting Committee: CEN/TC 289/WG 2 - Physical test methods
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Feb-2017
• Due Date: 08-Apr-2017
• Completion Date: 15-Feb-2017
• Ref Project: SIST EN ISO 17232:2017 - Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2017)

Relations

• Replaces: EN ISO 17232:2009 - Leather - Physical and mechanical tests - Determination of heat resistance of patent leather (ISO 17232:2006)
• Effective Date: 22-Feb-2017

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17232:2017
01-maj-2017
1DGRPHãþD
SIST EN ISO 17232:2009
8VQMH)L]LNDOQLLQPHKDQVNLSUHVNXVL8JRWDYOMDQMHRGSRUQRVWLODNDVWHJDXVQMD
SURWLYURþLQL,62
Leather - Physical and mechanical tests - Determination of heat resistance of patent
leather (ISO 17232:2017)
Leder - Physikalische und mechanische Prüfungen - Bestimmung der
Wärmebeständigkeit von Lackleder (ISO 17232:2017)
Cuir - Essais physiques et mécaniques - Détermination de la résistance à la chaleur des
cuirs vernis (ISO 17232:2017)
Ta slovenski standard je istoveten z: EN ISO 17232:2017
ICS:
59.140.30 Usnje in krzno Leather and furs
SIST EN ISO 17232:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17232:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 17232:2017


EN ISO 17232
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2017
EUROPÄISCHE NORM
ICS 59.140.30 Supersedes EN ISO 17232:2009
English Version

Leather - Physical and mechanical tests - Determination of
heat resistance of patent leather (ISO 17232:2017)
Cuir - Essais physiques et mécaniques - Détermination Leder - Physikalische und mechanische Prüfungen -
de la résistance à la chaleur des cuirs vernis (ISO Bestimmung der Wärmebeständigkeit von Lackleder
17232:2017) (ISO 17232:2017)
This European Standard was approved by CEN on 5 January 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17232:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17232:2017
EN ISO 17232:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17232:2017
EN ISO 17232:2017 (E)
European foreword
This document (EN ISO 17232:2017) has been prepared by Technical Committee IULTCS "International
Union of Leather Technologists and Chemists Societies" in collaboration with Technical Committee
CEN/TC 289 “Leather” the secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2017, and conflicting national standards shall
be withdrawn at the latest by August 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN ISO 17232:2009.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17232:2017 has been approved by CEN as EN ISO 17232:2017 without any modification.


3

---------------------- Page: 5 ----------------------

SIST EN ISO 17232:2017

---------------------- Page: 6 ----------------------

SIST EN ISO 17232:2017
INTERNATIONAL ISO
STANDARD 17232
IULTC
...