Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2004)

This European Standard specifies a test method for measuring the force required to pull a single heel pin out of a heel. This test method can be used to measure the heel pin holding strength of heel materials by using a standard heel pin and a method of insertion, or it can be used to assess the heel nailing of commercial production.
This test method is applicable to testing plastics and wooden heels for women's footwear. Heels composed of layers of fibreboard or leather and low plastics heels for men's footwear cannot be tested by this method.

Schuhe - Prüfverfahren für Absätze - Absatznagel-Haltefestigkeit (ISO 19957:2004)

Chaussures - Méthodes d'essai relatives aux talons - Résistance a l'arrachement de pointe a talon (ISO 19957:2004)

L'ISO 19957:2004 spécifie une méthode d'essai pour mesurer la force exigée pour retirer une pointe d'un talon. Cette méthode d'essai peut être utilisée pour mesurer la résistance à l'arrachement de pointes des matériaux de talon au moyen d'une pointe à talon et d'une méthode d'insertion normalisées, ou pour évaluer le clouage des talons de production commerciale.
La présente méthode d'essai est applicable à l'essai des talons en plastique et en bois pour chaussures pour femmes. Les talons composés de couches de panneaux de fibres ou de cuir et les talons bas en plastique pour chaussures pour hommes ne peuvent être mis à l'essai par cette méthode.

Obutev – Preskusne metode za pete – Vzdržljivost žeblja za pritrjevanje (ISO 19957:2004)

General Information

Status
Published
Publication Date
28-Feb-2005
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Mar-2005
Due Date
01-Mar-2005
Completion Date
01-Mar-2005

Relations

Buy Standard

Standard
EN ISO 19957:2005
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19957:2005
01-marec-2005
Obutev – Preskusne metode za pete – Vzdržljivost žeblja za pritrjevanje (ISO
19957:2004)
Footwear - Test methods for heels - Heel pin holding strength (ISO 19957:2004)
Schuhe - Prüfverfahren für Absätze - Absatznagel-Haltefestigkeit (ISO 19957:2004)
Chaussures - Méthodes d'essai relatives aux talons - Résistance a l'arrachement de
pointe a talon (ISO 19957:2004)
Ta slovenski standard je istoveten z: EN ISO 19957:2004
ICS:
61.060 Obuvala Footwear
SIST EN ISO 19957:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 19957:2005

---------------------- Page: 2 ----------------------

SIST EN ISO 19957:2005
EUROPEAN STANDARD
EN ISO 19957
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2004
ICS 61.060

English version
Footwear - Test methods for heels - Heel pin holding strength
(ISO 19957:2004)
Chaussures - Méthodes d'essai relatives aux talons - Schuhe - Prüfverfahren für Absätze - Absatznagel-
Résistance à l'arrachement de pointe à talon (ISO Haltefestigkeit (ISO 19957:2004)
19957:2004)
This European Standard was approved by CEN on 2 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19957:2004: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 19957:2005
EN ISO 19957:2004 (E)
Contents           page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Apparatus and material.4
5 Sampling and conditioning.5
6 Test method.6
7 Expression of results .7
8 Test report .8


2

---------------------- Page: 4 ----------------------

SIST EN ISO 19957:2005
EN ISO 19957:2004 (E)
Foreword
This document (EN ISO 19957:2004) has been prepared by Technical Committee CEN /TC 309 "Footwear", the
secretariat of which is held by AENOR, in collaboration with Technical Committee ISO/TC 216 "Footwear".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2005, and conflicting national standards shall be withdrawn at the latest by
March 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 19957:2005
EN ISO 19957:2004 (E)
1 Scope
This European Standard specifies a test method for measuring the force required to pull a single heel pin out of a
heel. This test method can be used to measure the heel pin holding strength of heel materials by using a standard
heel pin and a method of insertion, or it can be used to assess the heel nailing of commercial production.
This test method is applicable to testing plastics and wooden heels for women’s footwear. Heels composed of
layers of fibreboard or leather and low plastics heels for men’s footwear cannot be tested by this method.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references,
only the edition cited applies. For undated references, the latest edition of the referenced document (including any
amendments) applies.

EN ISO 7500-1, Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression
testing machines (ISO 7500-1:1999).
3 Terms and definitions
For the purposes of this European Standard, the following term and definition apply.

heel pin holding strength
force required to pull a standard pin out of the heel material divided by the effective length of pin buttressing in the
material, expressed as N/mm
4 Apparatus and material
4.1 The following apparatus and material shall be used:
4.2 Tensile testing machine complying with the requirements of EN ISO 7500-1 class 2, with a range of
approximately 0 N to 2000 N and a constant rate of speed of 40 mm/min ± 10 mm/min.
NOTE A constant rate of traverse tester can be used if this is of a type where increase of load produces an appreciable
movement of the load jaw (e.g. a pendulum tester). Its rate of traverse should be set to give on average the specified rate of
loading over the whole range for zero jaw separation. This approximation to constant rate of loading is acceptable because the
amount of jaw separation in the test is small before the maximum load is reached.
4.3 Small clamp or slotted hook, which can be attached to one jaw of the tensile testing machine via a flexible
coupling.
4.4 Commercial heel nailing machine.
4.5 Standard heel pin (see Figure 1), with the following dimensions:
a) length:
18 mm ± 0,5 mm;
b) diameter over the buttress ridges: 1,9 mm, minimum;
c) number of complete formed buttress pressure flanks (the side of
13 minimum;
the buttress which is nearly at right angles to the pin shaft):
d) distance from point to the base of the first fully formed buttress
12 mm, minimum.
groove at the head end:

4

---------------------- Page: 6 ----------------------

SIST EN ISO 19957:2005
EN ISO 19957:2004 (E)
Dimensions in millimetres

Key
1 Minimum of 13 fully formed buttress flanks
Figure 1 — Standard heel pin
4.6 Metal rod
5 Sampling and conditioning
5.1 Number of test specimens
For assessing the heel pin holding properties of a heel material, prepare and test three heels each containing six
inserted pins, or, if it is not possible to insert six pins, four heels each containing four pins. When testing heels
already attached to shoes, where possible, also prepare three containing
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.