iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13087-3:2000

(Main)

Protective helmets - Test methods - Part 3: Resistance to penetration

Protective helmets - Test methods - Part 3: Resistance to penetration

The European Standard prEN 13087:1998 describes methods of test for protective helmets. The purpose of these tests is to enable assessment of the performance of the helmet as specified in the appropriate helmet standard. This Part of EN 13087 specifies the method of test for resistance to penetration.

Schutzhelme - Prüfverfahren - Teil 3: Durchdringungsfestigkeit

Die Europäische Norm prEN 13087:1998 beschreibt Prüfverfahren für Schutz- helme. Zweck dieser Prüfungen ist die Beurteilung der Gebrauchstauglichkeit desHelmes, wie es in der entsprechenden Norm für Helme festgelegt ist. Dieser Teilvon prEN 13087:1998 legt Verfahren zur Bestimmung der Durchdringungsfestigkeit fest.

Casques de protection - Méthodes d'essai - Partie 3: Résistance a la pénétration

La présente norme européenne prEN 13087:1998 décrit des méthodes d'essai pour les casques de protection. Ces essais sont destinés a permettre l'évaluation de la performance du casque spécifiée dans la norme de casque appropriée. La présente partie de l'EN 13087 spécifie la méthode d'essai pour la résistance a la pénétration.

Varovalne čelade - Preskusne metode - 3. del: Odpornost proti prediranju

General Information

Status
Published
Publication Date
31-Aug-2000
ICS
13.340.20 - Head protective equipment
Technical Committee
OVP - Personal protecting equipment
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Sep-2000
Due Date
01-Sep-2000
Completion Date
01-Sep-2000
Directive
89/686/EEC - Council Directive 89/686/EEC of 21 December 1989 on the approximation of the laws of the Member States relating to personal protective equipment
Mandate
M/031 - Standardization mandate to CEN/CENELEC concerning standards for Personal Protective Equipment
Ref Project
EN 13087-3:2000 - Protective helmets - Test methods - Part 3: Resistance to penetration

Relations

Amended By
SIST EN 13087-3:2000/A1:2002 - Protective helmets - Test methods - Part 3: Resistance to penetration
Effective Date
22-Dec-2008

Buy Standard

EN 13087-3:2000EN 13087-3:2000
PreviousNext
Standard
EN 13087-3:2000
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13087-3:2000
01-september-2000
9DURYDOQHþHODGH3UHVNXVQHPHWRGHGHO2GSRUQRVWSURWLSUHGLUDQMX
Protective helmets - Test methods - Part 3: Resistance to penetration
Schutzhelme - Prüfverfahren - Teil 3: Durchdringungsfestigkeit
Casques de protection - Méthodes d'essai - Partie 3: Résistance
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 1384:2023(Main)
Helmets for equestrian activities
EN 1384:2023

This European Standard specifies requirement for protective helmets that may or may not have a peak, for people involved in equestrian activities. It gives safety requirements that include methods of test and levels of performance for shock absorption, for resistance to penetration and for the strength and effectiveness of the retention system and the deflection of a peak if fitted.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17946:2023(Main)
Helmets for S-EPAC riders
CEN/TS 17946:2023

This document specifies requirements and test methods for helmets worn by users of speed electrically power assisted bicycles (S-EPACs). This document also specifies requirements and test methods for integrated visors in helmets worn by users of S-EPACS.
Requirements and the corresponding methods of test are given for the following:
-   construction, including field of vision;
-   shock absorbing properties;
-   retention system properties, including chin strap and fastening devices;
-   marking and information.

  • Technical specification
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16321-1:2022(Main)
Eye and face protection for occupational use - Part 1: General requirements (ISO 16321-1:2021)
EN ISO 16321-1:2022

This document specifies general requirements for protectors designed to provide protection for the eyes and
faces of persons against common occupational hazards such as impacts from flying particles and fragments,
optical radiation, dusts, splashing materials, molten metals, heat, flame, hot solids, harmful gases, vapours
and aerosols.
Additional requirements for protectors used during welding and related techniques and for mesh protectors
are given in ISO 16321-2 and ISO 16321-3.
This document applies to all afocal (plano power) and prescription lens protectors and components.
This document also applies to those articles of eye and face protection used for occupational-type tasks but
not performed as part of an occupation, e.g. "do-it-yourself".
This document does not apply to:
— sunglasses for general use for which ISO 12312-1 applies;
— protectors for medically prescribed applications (not occupational); e.g. eye protection for severe
dry eye, tints prescribed for medical conditions;
— protectors intended to control exposure of the eyes of patients during diagnosis or treatment (e.g.
ISO/DTR 22463);
— protectors for use during medical or aesthetic applications intense light sources (ILS) for which ISO
12609 series applies;
— protectors intended for direct observation of the sun, such as for solar-eclipse viewing for which
ISO 12312-2 applies;
— protectors specifically intended for sports for which ISO 18527 series applies;
— laser protectors, for which ISO 19818 applies;
— face protectors intended for live-working to protect against short-circuit electric arcs for which
IEC 62819 applies;
— protectors intended to protect against ionizing radiation for which IEC 61331-3 applies.

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 12312-1:2022(Main)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
EN ISO 12312-1:2022

This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including
road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used
as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar
eclipse, for which ISO 12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO 16321 (all parts)

  • Standard
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18527-1:2022(Main)
Eye and face protection for sports use - Part 1: Requirements for downhill skiing and snowboarding goggles (ISO 18527-1:2021)
EN ISO 18527-1:2022

This International Standard applies to all afocal (plano power) goggles, intended for eye protection against
hazards including ultraviolet and visible solar radiation, rain, snow and wind, during downhill skiing, snowboarding
and other activities with similar hazards and no greater risks.
It deals with materials, construction, optical properties, testing, labelling and marking.
Requirements for the marking of goggles and for information to be supplied by the manufacturer are also
specified.
Information on the selection and use of ski and snow-boarding goggles is given in Annex A.
This International Standard does not apply to:
a) eyewear for protection when operating or travelling on a motorized vehicle;
b) eyewear for protection against radiation from artificial light sources, such as those used in
solaria;
c) eyewear for direct observation of the sun;
d) eye protectors intended for sports with unrelated hazards and risks.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16321-3:2022(Main)
Eye and face protection for occupational use - Part 3: Additional requirements for mesh protectors (ISO 16321-3:2021)
EN ISO 16321-3:2022

This document specifies additional requirements for mesh protectors designed to provide protection
for the eyes and faces of persons against mechanical hazards such as impacts from flying particles and
fragments.
The other applicable requirements for mesh protectors and the frames/mountings to which they are
intended to be fitted are given in ISO 16321-1.
This document specifies materials, design, performance requirements, and marking requirements for
mesh protectors that are different from and/or supplement ISO 16321-1.
This document is not applicable to protectors for use against liquid splash (including molten metal), hot
solid risks, electrical hazards, infrared and ultraviolet radiation. For protection against these hazards
suitable additional or alternative protectors according ISO 16321-1 will be needed.
Mesh protectors for use in sports such as fencing are excluded.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17479:2022(Main)
Hearing protectors - Guidance on selection of individual fit testing methods
EN 17479:2021

This document gives guidance on the appropriate selection of fit testing methods and measurement, and provides practical guidance on fit testing methods, their uses and limitations.
This document does not specify the technical requirements for manufacturing fit testing equipment.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16321-2:2021(Main)
Eye and face protection for occupational use - Part 2: Additional requirements for protectors used during welding and related techniques (ISO 16321-2:2021)
EN ISO 16321-2:2021

This document specifies additional requirements for eye and face protectors designed to provide protection
for the eyes and faces of persons against occupational hazards during welding and allied processes, such as
optical radiation, impacts from flying particles and fragments, and hot solids.
This document also applies to those articles of eye- and face-protection used for occupational-type tasks but
not performed as part of an occupation, e.g. "do-it-yourself".
This document specifies materials, design, performance requirements, and marking requirements for
welding protectors which are different from and/or supplement ISO 16321-1.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18527-2:2021(Main)
Eye and face protection for sports use - Part 2: Requirements for eye protectors for squash and eye protectors for racquetball and squash 57 (ISO 18527-2:2021)
EN ISO 18527-2:2021

This International Standard applies to all eye protectors intended for eye protection against hazards during the
sports of Squash, Racquetball and Squash 57 and sports with similar hazards and no greater risks.
It deals with materials, construction, optical properties, testing, labelling and marking.
It applies to eye protectors that incorporate prescription lenses, but not to eye protectors designed for use
over spectacles.
Requirements for the marking of eye protectors and for information to be supplied by the manufacturer are
also specified.
Information on the selection and use of eye protectors for Squash, Racquetball and Squash 57 is given in
Annex A.
This International Standard does not apply to:
a. sports eye protectors designed for use over prescription spectacles;
b. eye protectors for occupational applications;
c. eye protectors without lenses;
d. eye protectors for sports where the hazards are unrelated to the hazards in or involve greater risks
than Squash, Racquetball and Squash 57.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19818-1:2021(Main)
Eye and face protection - Protection against laser radiation - Part 1: Requirements and test methods (ISO 19818-1:2021)
EN ISO 19818-1:2021

This document applies to eye and face protectors intended to provide protection against accidental
exposure to laser radiation within the wavelength range 180 nm to 1 mm. It defines the requirements,
test methods and marking. Laser protective filters used for intentional exposure to laser radiation, as
viewing windows in laser equipment or incorporated into optical instruments such as operating
microscopes which may be used for deliberate viewing of laser radiation as part of their function, and
loupes, are outside the scope of this document.
This document is applicable to devices intended for patient protection during medical laser procedures
except for treatment in the periorbital area.
The eye protection described in this document is intended for use at normal ambient temperature (23 ±
5)°C, unless specified in particular requirement(s).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    German language
    sale 10% off
    e-Library read for
    1 day