SIST EN ISO 15995:2021/A1:2024
(Amendment)Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 (ISO 15995:2021/Amd 1:2024)
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 (ISO 15995:2021/Amd 1:2024)
Gasflaschen - Spezifikation und Prüfung von Flaschenventilen für Flüssiggas (LPG) - Handbetätigt - Änderung 1 (ISO 15995:2021/Amd 1:2024)
No scope available
Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture manuelle - Amendement 1 (ISO 15995:2021/Amd 1:2024)
Plinske jeklenke - Specifikacija in preskušanje ventilov jeklenk za utekočinjeni naftni plin (UNP) - Ročno upravljanje - Dopolnilo A1 (ISO 15995:2021/Amd 1:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Plinske jeklenke - Specifikacija in preskušanje ventilov jeklenk za utekočinjeni
naftni plin (UNP) - Ročno upravljanje - Dopolnilo A1 (ISO 15995:2021/Amd 1:2024)
Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated -
Amendment 1 (ISO 15995:2021/Amd 1:2024)
Gasflaschen - Spezifikation und Prüfung von Flaschenventilen für Flüssiggas (LPG) -
Handbetätigt - Änderung 1 (ISO 15995:2021/Amd 1:2024)
Bouteilles à gaz - Spécifications et essais pour valves de bouteilles de GPL - Fermeture
manuelle - Amendement 1 (ISO 15995:2021/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 15995:2021/A1:2024
ICS:
23.020.35 Plinske jeklenke Gas cylinders
23.060.40 Tlačni regulatorji Pressure regulators
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 15995:2021/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 23.020.35
English Version
Gas cylinders - Specifications and testing of LPG cylinder
valves - Manually operated - Amendment 1 (ISO
15995:2021/Amd 1:2024)
Bouteilles à gaz - Spécifications et essais pour valves de Gasflaschen - Spezifikation und Prüfung von
bouteilles de GPL - Fermeture manuelle - Amendement Flaschenventilen für Flüssiggas (LPG) - Handbetätigt -
1 (ISO 15995:2021/Amd 1:2024) Änderung 1 (ISO 15995:2021/Amd 1:2024)
This amendment A1 modifies the European Standard EN ISO 15995:2021; it was approved by CEN on 3 September 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15995:2021/A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 15995:2021/A1:2024) has been prepared by Technical Committee ISO/TC 58
"Gas cylinders" in collaboration with Technical Committee CEN/TC 286 “Liquefied petroleum gas
equipment and accessories” the secretariat of which is held by NSAI.
This Amendment to the European Standard EN ISO 15995:2021 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by March 2025, and
conflicting national standards shall be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 15995:2021/Amd 1:2024 has been approved by CEN as EN ISO 15995:2021/A1:2024
without any modification.
International
Standard
ISO 15995
Third edition
Gas cylinders — Specifications and
2021-06
testing of LPG cylinder valves —
Manually operated
AMENDMENT 1
2024-08
AMENDMENT 1
Bouteilles à gaz — Spécifications et essais pour valves de
bouteilles de GPL — Fermeture manuelle
AMENDEMENT 1
Reference number
ISO 15995:2021/Amd.1:2024(en) © ISO 2024
ISO 15995:2021/Amd.1:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 15995:2021/Amd.1:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO document should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed patent
rights in respect thereof. As of the date of publication of this document, ISO had not received notice of (a)
patent(s) which may be required to implement this document. However, implementers are cautioned that
this may not represent the latest information, which may be obtained from the patent database available at
www.iso.org/patents. ISO shall not be held responsible for identifying any or all such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and expressions
related to conformity assessment, as well as information about ISO's adherence to the World Trade
Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, Subcommittee SC 2, Cylinder
fittings, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/
TC 286, Liquefied petroleum gas equipment and accessories, in accordance with the Agreement on technical
cooperation between ISO and CEN (Vienna Agreement).
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iii
ISO 15995:2021/Amd.1:2024(en)
Gas cylinders — Specifications and testing of LPG cylinder
valves — Manually operated
AMENDMENT 1
Normative references
Add the following normative reference:
MIL -STD -810G: 2008, Department of Defence Test Method Standard, Environmental Engineering Considerations
and Laboratory Tests
4.2
Add the following new subclause:
4.2.5 Adhesives
Where used, adhesives shall be proven compatible with LPG in accordance with recognized international,
regional or national standards.
4.3.1, last paragraph
Replace paragraph with the following:
All valves shall close when turned clockwise and open when turned anti-clockwise. The hand wheel shall
be visibly marked with a portion(s) of circle terminating by an arrow for each direction. One arrow shall be
marked with “–" or "close” (closure) and the other arrow with “+” or "open" (opening) to indicate the result
of the rotation.
4.3.3, first sentence
Replace sentence with the following:
Valve inlet connections shall conform to an international, regional or national standard or proprietary
designs that have been qualified to an acceptable industry standard.
4.3.3, NOTE
Replace NOTE with the following:
NOTE 1 Valve inlet connection standards are, for example, ISO 11363-1 and ISO 15245-1.
NOTE 2 Qualification procedures for proprietary valve inlet connection designs are, for example, given in
ISO 10692-2.
ISO 15995:2021/Amd.1:2024(en)
4.3.3, third paragraph
Replace the reference "Table 3" with "Table 4".
4.3.4, first sentence
Replace sentence with the following:
Valve outlet connections shall conform to an international, regional or national standard or proprietary
designs that have been qualified to an acceptable industry standard.
4.3.4, NOTE
Replace NOTE with the following:
NOTE 1 Valve outlet connection standards are, for example, ISO 5145 and EN 15202.
NOTE 2 Qualification procedures for proprietary valve outlet connection designs are, for example, given in CGA V-1.
4.4.1
Add the following paragraph at the end of the subclause:
Where threaded joints are used within the valve, an anaerobic sealant may be used if proven compatible
with LPG in accordance with recognized international, regional (e.g. EN 751-1) or national standards.
4.4.4
Add the following indents to the end of the list:
d) There shall be sufficient thread engagement between the vent screw and the fixed liquid level gauge to
allow metal to metal contact in the event of absence of the seal.
e) The dip tube shall be securely fitted to the valve to ensure that it does not disassemble during installation
or operation.
EXAMPLE Using adhesive, press fitting or any other mechanical means.
4.4.9
Add the following paragraph at the end of the subclause:
The sediment tube shall be securely fitted to the valve to ensure that it does not disassemble during
installation or operation.
EXAMPLE Using adhesive, press fitting or any other mechanical means.
5.1
Delete subclause numbering "5.1.1" and retain text as normal style.
ISO 15995:2021/Amd.1:2024(en)
5.1, third paragraph
Replace the reference "Table 1" with "Table 2".
5.1
Add the following text as new fifth paragraph:
For valves designed to incorporate pressure relief valves, their ports shall be plugged or sealed, or their
setting shall be adjusted to allow applying the test pressure without activating the pressure relief valve.
5.1.2
Delete subclause numbering "5.1.2" and replace paragraph and list with the following text and Table 1:
Changes or variations to the valve configuration which can adversely affect valve performance shall require
additional inspection and tests in accordance with Table 1, using the number of test samples quoted in
Table 2.
ISO 15995:2021/Amd.1:2024(en)
Vibration including subse-
quent external and internal
leak tightness
Non-return valve
Excess flow valve
Examination of disassembled
valves
External and internal leak
tightness at low, high and
room temperature
Endurance – Part 1 and Part 2
External and internal leak
tightness at room tempera-
ture
Excessive torque tests includ-
ing subsequent internal/ex-
ternal leak tightness
Impact including subsequent
internal leak tightness
Hand wheel fire exposure
Valve stem including subse-
quent external and internal
leak tightness
Hydraulic pressure includ-
ing subsequent external and
internal leak tightness
Inspection
Table 1 — Inspections and tests required after changes or variations to the valve configuration
Repetition of any tests to be decided on a case by case basis depending on
Changes of the material of the valve body
changes of chemical composition and mechanical properties.
Changes of the material of the handwheel x x x x x
Change of the handwheel diameter of a regular valve design No tests required.
Increase of the handwheel diameter of a special valve design
x
in accordance with Annex A
Change of configuration from special valve design to regular
x x x x
valve des
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.