Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm - Product standard

This standard specifies the required characteristics and test applicable to sealing sleeves used in elements of connection according to EN 3155-002 and EN 4530-002.

Luft- und Raumfahrt - Dichtungshülsen zur Verwendung in Verbindungselementen - Teil 005: Dichtungshülsen für Leitungen mit einem Außendurchmesser von 3 mm bis 4,1 mm - Produktnorm

Diese Norm legt die Anforderungen und Prüfungen fest, die auf Dichtungshülsen zur Verwendung in Verbin¬dungselementen nach EN 3155 002 and EN 4530 002 anwendbar sind.

Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion - Partie 005 : Manchons d'étanchéité pour câbles de diamètre extérieur 3 mm à 4,1 mm - Norme de produit

Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 005. del: Tesnilne puše za kable z zunanjim premerom od 3 mm do 4,1 mm - Standard za proizvod

General Information

Status
Published
Publication Date
14-Jun-2009
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
29-May-2009
Due Date
03-Aug-2009
Completion Date
15-Jun-2009

Buy Standard

Standard
SIST EN 4530-005:2009
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 4530-005:2009
01-september-2009
Aeronavtika - Tesnilne puše za uporabo v veznih elementih - 005. del: Tesnilne
puše za kable z zunanjim premerom od 3 mm do 4,1 mm - Standard za proizvod

Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing

sleeves for external diameter cable 3 mm to 4,1 mm - Product standard

Luft- und Raumfahrt - Dichtungshülsen zur Verwendung in Verbindungselementen - Teil

005: Dichtungshülsen für Leitungen mit einem Außendurchmesser von 3 mm bis 4,1 mm

- Produktnorm

Série aérospatiale - Manchons d'étanchéité utilisés dans les organes de connexion -

Partie 005 : Manchons d'étanchéité pour câbles de diamètre extérieur 3 mm à 4,1 mm -

Norme de produit
Ta slovenski standard je istoveten z: EN 4530-005:2006
ICS:
49.060 /HWDOVNDLQYHVROMVND Aerospace electric
HOHNWULþQDRSUHPDLQVLVWHPL equipment and systems
SIST EN 4530-005:2009 en,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 4530-005:2009
---------------------- Page: 2 ----------------------
SIST EN 4530-005:2009
EUROPEAN STANDARD
EN 4530-005
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 49.060
English Version
Aerospace series - Sealing sleeves used in elements of
connection - Part 005: Sealing sleeves for external diameter
cable 3 mm to 4,1 mm - Product standard

Série aérospatiale - Manchons d'étanchéité utilisés dans Luft- und Raumfahrt - Dichtungshülse zur Verwendung in

les organes de connexion - Partie 005 : Manchons Verbindungselementen - Teil 005: Dichtungshülse für

d'étanchéité pour câbles de diamètre extérieur 3 mm à 4,1 Leitungen mit einem Aussendurchmesser von 3 mm bis 4,1

mm - Norme de produit mm - Produktnorm
This European Standard was approved by CEN on 24 June 2006.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,

Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 4530-005:2006: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 4530-005:2009
EN 4530-005:2006 (E)
Contents Page

Foreword..............................................................................................................................................................3

1 Scope ......................................................................................................................................................4

2 Normative references ............................................................................................................................4

3 Terms and definitions ...........................................................................................................................4

4 Required characteristics.......................................................................................................................4

5 Designation ............................................................................................................................................7

6 Marking ...................................................................................................................................................8

7 Delivery conditions................................................................................................................................8

8 Technical specification .........................................................................................................................8

---------------------- Page: 4 ----------------------
SIST EN 4530-005:2009
EN 4530-005:2006 (E)
Foreword

This document (EN 4530-005:2006) has been prepared by the Aerospace and Defence Industries Association

of Europe - Standardization (ASD-STAN).

After enquiries and votes carried out in accordance with the rules of this Association, this Standard has

received the approval of the National Associations and the Official Services of the member countries of ASD,

prior to its presentation to CEN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by June 2007, and conflicting national standards shall be withdrawn at

the latest by June 2007.
Attention is drawn to the possibil
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.