SIST-TP ISO/TR 23750:2024
(Main)Cosmetics - Answers to frequently asked questions on ingredients and product characterization according to ISO 16128-1 and ISO 16128-2
Cosmetics - Answers to frequently asked questions on ingredients and product characterization according to ISO 16128-1 and ISO 16128-2
This document provides answers to questions which can arise when calculating indexes and contents according to ISO 16128-1 and ISO 16128-2.
It clarifies conditions on process, solvents and carbon sources to qualify ingredients regarding the ISO 16128 series. Detailed examples, explaining how to use the ISO 16128 series are also provided.
Cosmétiques - Réponses aux questions fréquentes sur la caractérisation des ingrédients et produits conformément à l’ISO 16128-1 et l’ISO 16128-2
Le présent document apporte des réponses aux questions qui peuvent se poser lors du calcul des indices et contenus conformément à l’ISO 16128-1 et l’ISO 16128-2.
Il clarifie les conditions relatives aux procédés, solvants et sources de carbone permettant de qualifier les ingrédients suivant la série ISO 16128. Des exemples détaillés expliquant comment utiliser la série ISO 16128 sont également présentés.
Kozmetika - Odgovori na pogosto zastavljena vprašanja o karakterizaciji sestavin in izdelkov v skladu z ISO 16128-1 in ISO 16128-2
Ta dokument podaja odgovore na pogosto zastavljena vprašanja, ki se lahko pojavijo pri izračunavanju indeksov in vsebnosti v skladu s standardom ISO 16128-1 in ISO 16128-2.
Pojasnjuje pogoje o procesih, topilih in virih ogljika za kvalificiranje sestavin glede na skupino standardov ISO 16128. Podani so tudi podrobni primeri, ki pojasnjujejo, kako uporabljati skupino standardov ISO 16128.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2024
Kozmetika - Odgovori na pogosto zastavljena vprašanja o karakterizaciji sestavin
in izdelkov v skladu z ISO 16128-1 in ISO 16128-2
Cosmetics - Answers to frequently asked questions on ingredients and product
characterization according to ISO 16128-1 and ISO 16128-2
Cosmétiques - Réponses aux questions fréquentes sur la caractérisation des ingrédients
et produits conformément à l’ISO 16128-1 et l’ISO 16128-2
Ta slovenski standard je istoveten z: ISO/TR 23750:2021
ICS:
71.100.70 Kozmetika. Toaletni Cosmetics. Toiletries
pripomočki
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
TECHNICAL ISO/TR
REPORT 23750
First edition
2021-08
Cosmetics — Answers to frequently
asked questions on ingredients and
product characterization according to
ISO 16128-1 and ISO 16128-2
Cosmétiques — Réponses aux questions fréquemment posées sur la
caractérisation des ingrédients et des produits conformément à l'ISO
16128-1 et à l'ISO 16128-2
Reference number
©
ISO 2021
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Questions and answers . 1
4.1 General . 1
4.2 Natural ingredients . 2
4.3 Physical processes for natural ingredients . 3
4.4 Fermentation for natural ingredients . 5
4.5 Process solvents . 6
4.6 Mineral ingredients . 7
4.7 Derived natural ingredients . 8
4.8 Calculating the natural origin index . 9
4.9 Examples .12
4.10 Other chemical and biological processes .13
4.11 Index and content .13
4.12 Other FAQs .15
Annex A (Informative) Green chemistry principles referred to in ISO 16128-1:2016 Annex B .16
Bibliography .17
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 217, Cosmetics.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
Introduction
The ISO 16128 series provides guidelines on definitions and criteria for natural and organic cosmetic
ingredients and products. These guidelines are specific to the cosmetics sector, taking into account that
most existing approaches written for the agricultural and food sector are not directly transferrable to
cosmetics. They apply scientific judgment and offer principles towards a consistent logical framework
for natural and organic cosmetic ingredients and products incorporating common approaches employed
in existing references.
The purpose of the ISO 16128 series is to encourage a wider choice of natural and organic ingredients in
the formulation of a diverse variety of cosmetic products to encourage innovation.
The purpose of this document is to help ingredient manufacturers and cosmetic companies, or any
reader, to qualify cosmetic ingredients as natural, natural derived or non-natural when using the
ISO 16128 series.
TECHNICAL REPORT ISO/TR 23750:2021(E)
Cosmetics — Answers to frequently asked questions on
ingredients and product characterization according to ISO
16128-1 and ISO 16128-2
1 Scope
This document provides answers to questions which can arise when calculating indexes and contents
according to ISO 16128-1 and ISO 16128-2.
It clarifies conditions on process, solvents and carbon sources to qualify ingredients regarding the
ISO 16128 series. Detailed examples, explaining how to use the ISO 16128 series are also provided.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Questions and answers
4.1 General
Table 1 — General questions
No. Question Answer
0 How can an ingredient manufacturer and/or Ingredient manufacturers are recommended to provide
a cosmetic manufacturer assign the category cosmetic manufacturers with information related to com-
and index of an ingredient? position, origin and processing of ingredients to determine
ingredient indexes. For all ingredients, cosmetic manufac-
turers verify the category and index based on information
provided. Therefore, dialogue between ingredient and
cosmetic manufacturers is encouraged.
1 What are the differences between the following A cosmetic raw material is an ingredient or a mixture of
terms: ingredient, substance, raw material, and ingredients. An ingredient is a substance, i.e. a chemical
renewable material? element and its compounds in the natural state or the result
of a manufacturing process, excluding any solvent which
may be separated without affecting the stability of the
substance or changing its composition. Certain substances
are renewable if they are replenished naturally at a rate at
least the same as their consumption.
2 How does the definition of an extract relate to An extract is a substance or a mixture of substances. In most
its INCI composition? cases, its INCI name is the same as the natural ingredient
it comes from, with, when relevant, the INCI name(s) of the
ingredient solvent(s) used for extraction.
Table 1 (continued)
No. Question Answer
3 Can the INCI ingredient lists be used to deter- No. More information is needed to make that determination.
mine if a product is natural, derived natural INCI ingredients can be produced in different ways and pro-
or non-natural? cess solvents used will not appear in the INCI ingredients
list. For example, it is possible to have two products with
the exact same INCI names list be classified differently when
using the methods set out in ISO 16128-1.
4 How do the different categories of solvents ISO 16128-1 refers to two categories of solvents: ingredient
relate to their INCI nomenclature? solvents and process solvents, which are defined in ISO
16128-1:2016, Annex A. Ingredient solvents appear in the
INCI ingredients list. Process solvents do not remain in the
ingredient (except as traces) and will not appear in the INCI
ingredient list.
4.2 Natural ingredients
Per ISO 16128-1, natural ingredients are cosmetic ingredients obtained only from plants, animals,
micro-organisms, or minerals, including those obtained from these materials by:
— physical processes (e.g. as grinding, drying, distillation);
— fermentation reactions occurring in nature and leading to molecules occurring in nature; and
— other processes of preparation, including traditional ones (e.g. extraction using solvents) without
intentional chemical modification.
See Table 2.
Table 2 — Questions on natural ingredients
No. Question Answer
5 How is water defined in ISO 16128-1? Water is defined as always natural in ISO 16128-1:2016, 2.4.
6 The definition of water of crystallization is not In chemistry, water of crystallization is water molecules that
provided in ISO 16128-1. How is it defined? are present inside crystals of minerals. It can be considered
as constitutive water in natural minerals. In the cases which
water is either added during or produced after a reaction,
it is considered as formulation water.
7 How is aromatic water obtained by distillation It is classified as extraction water.
classified in ISO 16128-1?
8 Are ingredients such as ethanol, amino acids, Yes. As long as the feedstock is natural, the reaction fermen-
or nucleic acids considered natural if obtained tation occurs in nature and the fermentation product is one
by fermentation reaction using a substance that occurs in nature, the result is natural.
occurring in nature as a starting material?
9 Can Formula (1) in ISO 16128-2:2017, 4.3.1 be Formula (1) in ISO 16128-2:2017, 4 3 1 is used only for ex-
used to calculate the natural index of an ingre- tracts when ingredient solvents are present. Otherwise, the
dient that does not contain ingredient sol
...
TECHNICAL ISO/TR
REPORT 23750
First edition
2021-08
Cosmetics — Answers to frequently
asked questions on ingredients and
product characterization according to
ISO 16128-1 and ISO 16128-2
Cosmétiques — Réponses aux questions fréquemment posées sur la
caractérisation des ingrédients et des produits conformément à l'ISO
16128-1 et à l'ISO 16128-2
Reference number
©
ISO 2021
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Questions and answers . 1
4.1 General . 1
4.2 Natural ingredients . 2
4.3 Physical processes for natural ingredients . 3
4.4 Fermentation for natural ingredients . 5
4.5 Process solvents . 6
4.6 Mineral ingredients . 7
4.7 Derived natural ingredients . 8
4.8 Calculating the natural origin index . 9
4.9 Examples .12
4.10 Other chemical and biological processes .13
4.11 Index and content .13
4.12 Other FAQs .15
Annex A (Informative) Green chemistry principles referred to in ISO 16128-1:2016 Annex B .16
Bibliography .17
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 217, Cosmetics.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
Introduction
The ISO 16128 series provides guidelines on definitions and criteria for natural and organic cosmetic
ingredients and products. These guidelines are specific to the cosmetics sector, taking into account that
most existing approaches written for the agricultural and food sector are not directly transferrable to
cosmetics. They apply scientific judgment and offer principles towards a consistent logical framework
for natural and organic cosmetic ingredients and products incorporating common approaches employed
in existing references.
The purpose of the ISO 16128 series is to encourage a wider choice of natural and organic ingredients in
the formulation of a diverse variety of cosmetic products to encourage innovation.
The purpose of this document is to help ingredient manufacturers and cosmetic companies, or any
reader, to qualify cosmetic ingredients as natural, natural derived or non-natural when using the
ISO 16128 series.
TECHNICAL REPORT ISO/TR 23750:2021(E)
Cosmetics — Answers to frequently asked questions on
ingredients and product characterization according to ISO
16128-1 and ISO 16128-2
1 Scope
This document provides answers to questions which can arise when calculating indexes and contents
according to ISO 16128-1 and ISO 16128-2.
It clarifies conditions on process, solvents and carbon sources to qualify ingredients regarding the
ISO 16128 series. Detailed examples, explaining how to use the ISO 16128 series are also provided.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Questions and answers
4.1 General
Table 1 — General questions
No. Question Answer
0 How can an ingredient manufacturer and/or Ingredient manufacturers are recommended to provide
a cosmetic manufacturer assign the category cosmetic manufacturers with information related to com-
and index of an ingredient? position, origin and processing of ingredients to determine
ingredient indexes. For all ingredients, cosmetic manufac-
turers verify the category and index based on information
provided. Therefore, dialogue between ingredient and
cosmetic manufacturers is encouraged.
1 What are the differences between the following A cosmetic raw material is an ingredient or a mixture of
terms: ingredient, substance, raw material, and ingredients. An ingredient is a substance, i.e. a chemical
renewable material? element and its compounds in the natural state or the result
of a manufacturing process, excluding any solvent which
may be separated without affecting the stability of the
substance or changing its composition. Certain substances
are renewable if they are replenished naturally at a rate at
least the same as their consumption.
2 How does the definition of an extract relate to An extract is a substance or a mixture of substances. In most
its INCI composition? cases, its INCI name is the same as the natural ingredient
it comes from, with, when relevant, the INCI name(s) of the
ingredient solvent(s) used for extraction.
Table 1 (continued)
No. Question Answer
3 Can the INCI ingredient lists be used to deter- No. More information is needed to make that determination.
mine if a product is natural, derived natural INCI ingredients can be produced in different ways and pro-
or non-natural? cess solvents used will not appear in the INCI ingredients
list. For example, it is possible to have two products with
the exact same INCI names list be classified differently when
using the methods set out in ISO 16128-1.
4 How do the different categories of solvents ISO 16128-1 refers to two categories of solvents: ingredient
relate to their INCI nomenclature? solvents and process solvents, which are defined in ISO
16128-1:2016, Annex A. Ingredient solvents appear in the
INCI ingredients list. Process solvents do not remain in the
ingredient (except as traces) and will not appear in the INCI
ingredient list.
4.2 Natural ingredients
Per ISO 16128-1, natural ingredients are cosmetic ingredients obtained only from plants, animals,
micro-organisms, or minerals, including those obtained from these materials by:
— physical processes (e.g. as grinding, drying, distillation);
— fermentation reactions occurring in nature and leading to molecules occurring in nature; and
— other processes of preparation, including traditional ones (e.g. extraction using solvents) without
intentional chemical modification.
See Table 2.
Table 2 — Questions on natural ingredients
No. Question Answer
5 How is water defined in ISO 16128-1? Water is defined as always natural in ISO 16128-1:2016, 2.4.
6 The definition of water of crystallization is not In chemistry, water of crystallization is water molecules that
provided in ISO 16128-1. How is it defined? are present inside crystals of minerals. It can be considered
as constitutive water in natural minerals. In the cases which
water is either added during or produced after a reaction,
it is considered as formulation water.
7 How is aromatic water obtained by distillation It is classified as extraction water.
classified in ISO 16128-1?
8 Are ingredients such as ethanol, amino acids, Yes. As long as the feedstock is natural, the reaction fermen-
or nucleic acids considered natural if obtained tation occurs in nature and the fermentation product is one
by fermentation reaction using a substance that occurs in nature, the result is natural.
occurring in nature as a starting material?
9 Can Formula (1) in ISO 16128-2:2017, 4.3.1 be Formula (1) in ISO 16128-2:2017, 4 3 1 is used only for ex-
used to calculate the natural index of an ingre- tracts when ingredient solvents are present. Otherwise, the
dient that does not contain ingredient solvents? natural index is assigned, according to the same paragraph,
is either 1 or 0.
10 Aromatic natural raw materials are defined “Fragrance/Parfum” are often mixtures including aromatic
according to ISO 9235. How are the indexes natural materials. The calculation of indexes of all ingredi-
of aromatic natural raw materials calculated ents containing aromatic natural raw materials follows ISO
per ISO 16128? 16128. The exact composition, according to ISO 16128-1, can
be obtained from the suppliers.
2 © ISO 2021 – All rights reserved
4.3 Physical processes for natural ingredients
Table 3 — Questions on physical processes for natural ingredients
No. Question Answer
11 Can “processing by micro-waves” be considered Yes. Any sort of drying process can be considered as physical
as physical process? process if it does not lead to chemical modification.
12 Are new technologies for physical extraction Yes, new technologies, such as use of micro-waves, sonication
considered as physical extraction process? and ultrasounds can be considered, as long
...
TECHNICAL ISO/TR
REPORT 23750
First edition
2021-08
Cosmetics — Answers to frequently
asked questions on ingredients and
product characterization according to
ISO 16128-1 and ISO 16128-2
Cosmétiques — Réponses aux questions fréquemment posées sur la
caractérisation des ingrédients et des produits conformément à l'ISO
16128-1 et à l'ISO 16128-2
Reference number
©
ISO 2021
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2021 – All rights reserved
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Questions and answers . 1
4.1 General . 1
4.2 Natural ingredients . 2
4.3 Physical processes for natural ingredients . 3
4.4 Fermentation for natural ingredients . 5
4.5 Process solvents . 6
4.6 Mineral ingredients . 7
4.7 Derived natural ingredients . 8
4.8 Calculating the natural origin index . 9
4.9 Examples .12
4.10 Other chemical and biological processes .13
4.11 Index and content .13
4.12 Other FAQs .15
Annex A (Informative) Green chemistry principles referred to in ISO 16128-1:2016 Annex B .16
Bibliography .17
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see www .iso .org/
iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 217, Cosmetics.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www .iso .org/ members .html.
iv © ISO 2021 – All rights reserved
Introduction
The ISO 16128 series provides guidelines on definitions and criteria for natural and organic cosmetic
ingredients and products. These guidelines are specific to the cosmetics sector, taking into account that
most existing approaches written for the agricultural and food sector are not directly transferrable to
cosmetics. They apply scientific judgment and offer principles towards a consistent logical framework
for natural and organic cosmetic ingredients and products incorporating common approaches employed
in existing references.
The purpose of the ISO 16128 series is to encourage a wider choice of natural and organic ingredients in
the formulation of a diverse variety of cosmetic products to encourage innovation.
The purpose of this document is to help ingredient manufacturers and cosmetic companies, or any
reader, to qualify cosmetic ingredients as natural, natural derived or non-natural when using the
ISO 16128 series.
TECHNICAL REPORT ISO/TR 23750:2021(E)
Cosmetics — Answers to frequently asked questions on
ingredients and product characterization according to ISO
16128-1 and ISO 16128-2
1 Scope
This document provides answers to questions which can arise when calculating indexes and contents
according to ISO 16128-1 and ISO 16128-2.
It clarifies conditions on process, solvents and carbon sources to qualify ingredients regarding the
ISO 16128 series. Detailed examples, explaining how to use the ISO 16128 series are also provided.
2 Normative references
There are no normative references in this document.
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
4 Questions and answers
4.1 General
Table 1 — General questions
No. Question Answer
0 How can an ingredient manufacturer and/or Ingredient manufacturers are recommended to provide
a cosmetic manufacturer assign the category cosmetic manufacturers with information related to com-
and index of an ingredient? position, origin and processing of ingredients to determine
ingredient indexes. For all ingredients, cosmetic manufac-
turers verify the category and index based on information
provided. Therefore, dialogue between ingredient and
cosmetic manufacturers is encouraged.
1 What are the differences between the following A cosmetic raw material is an ingredient or a mixture of
terms: ingredient, substance, raw material, and ingredients. An ingredient is a substance, i.e. a chemical
renewable material? element and its compounds in the natural state or the result
of a manufacturing process, excluding any solvent which
may be separated without affecting the stability of the
substance or changing its composition. Certain substances
are renewable if they are replenished naturally at a rate at
least the same as their consumption.
2 How does the definition of an extract relate to An extract is a substance or a mixture of substances. In most
its INCI composition? cases, its INCI name is the same as the natural ingredient
it comes from, with, when relevant, the INCI name(s) of the
ingredient solvent(s) used for extraction.
Table 1 (continued)
No. Question Answer
3 Can the INCI ingredient lists be used to deter- No. More information is needed to make that determination.
mine if a product is natural, derived natural INCI ingredients can be produced in different ways and pro-
or non-natural? cess solvents used will not appear in the INCI ingredients
list. For example, it is possible to have two products with
the exact same INCI names list be classified differently when
using the methods set out in ISO 16128-1.
4 How do the different categories of solvents ISO 16128-1 refers to two categories of solvents: ingredient
relate to their INCI nomenclature? solvents and process solvents, which are defined in ISO
16128-1:2016, Annex A. Ingredient solvents appear in the
INCI ingredients list. Process solvents do not remain in the
ingredient (except as traces) and will not appear in the INCI
ingredient list.
4.2 Natural ingredients
Per ISO 16128-1, natural ingredients are cosmetic ingredients obtained only from plants, animals,
micro-organisms, or minerals, including those obtained from these materials by:
— physical processes (e.g. as grinding, drying, distillation);
— fermentation reactions occurring in nature and leading to molecules occurring in nature; and
— other processes of preparation, including traditional ones (e.g. extraction using solvents) without
intentional chemical modification.
See Table 2.
Table 2 — Questions on natural ingredients
No. Question Answer
5 How is water defined in ISO 16128-1? Water is defined as always natural in ISO 16128-1:2016, 2.4.
6 The definition of water of crystallization is not In chemistry, water of crystallization is water molecules that
provided in ISO 16128-1. How is it defined? are present inside crystals of minerals. It can be considered
as constitutive water in natural minerals. In the cases which
water is either added during or produced after a reaction,
it is considered as formulation water.
7 How is aromatic water obtained by distillation It is classified as extraction water.
classified in ISO 16128-1?
8 Are ingredients such as ethanol, amino acids, Yes. As long as the feedstock is natural, the reaction fermen-
or nucleic acids considered natural if obtained tation occurs in nature and the fermentation product is one
by fermentation reaction using a substance that occurs in nature, the result is natural.
occurring in nature as a starting material?
9 Can Formula (1) in ISO 16128-2:2017, 4.3.1 be Formula (1) in ISO 16128-2:2017, 4 3 1 is used only for ex-
used to calculate the natural index of an ingre- tracts when ingredient solvents are present. Otherwise, the
dient that does not contain ingredient solvents? natural index is assigned, according to the same paragraph,
is either 1 or 0.
10 Aromatic natural raw materials are defined “Fragrance/Parfum” are often mixtures including aromatic
according to ISO 9235. How are the indexes natural materials. The calculation of indexes of all ingredi-
of aromatic natural raw materials calculated ents containing aromatic natural raw materials follows ISO
per ISO 16128? 16128. The exact composition, according to ISO 16128-1, can
be obtained from the suppliers.
2 © ISO 2021 – All rights reserved
4.3 Physical processes for natural ingredients
Table 3 — Questions on physical processes for natural ingredients
No. Question Answer
11 Can “processing by micro-waves” be considered Yes. Any sort of drying process can be considered as physical
as physical process? process if it does not lead to chemical modification.
12 Are new technologies for physical extraction Yes, new technologies, such as use of micro-waves, sonication
considered as physical extraction process? and ultrasounds can be considered, as long
...
RAPPORT ISO/TR
TECHNIQUE 23750
Première édition
2021-08
Cosmétiques — Réponses aux
questions fréquentes sur la
caractérisation des ingrédients et
produits conformément à l’ISO 16128-
1 et l’ISO 16128-2
Cosmetics — Answers to frequently asked questions on ingredients
and product characterization according to ISO 16128-1 and ISO
16128-2
Numéro de référence
©
ISO 2021
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2021 – Tous droits réservés
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Questions et réponses . 1
4.1 Généralités . 1
4.2 Ingrédients naturels . 2
4.3 Procédés physiques des ingrédients naturels . 3
4.4 Fermentation d’ingrédients naturels . 6
4.5 Solvants de procédé . 7
4.6 Ingrédients minéraux . 8
4.7 Ingrédients dérivés de matériaux naturels . 9
4.8 Calcul de l’indice d’origine naturelle .11
4.9 Exemples .14
4.10 Autres procédés chimiques et biologiques .15
4.11 Indice et contenu .15
4.12 Autres FAQ .17
Annexe A (Informative) Principes de chimie verte mentionnés dans l’ISO 16128-1:2016,
Annexe B .18
Bibliographie .19
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www .iso .org/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 217, Cosmétiques.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www .iso .org/ fr/ members .html.
iv © ISO 2021 – Tous droits réservés
Introduction
La série ISO 16128 fournit des lignes directrices relatives aux définitions et aux critères applicables
aux ingrédients et produits cosmétiques naturels et biologiques. Ces lignes directrices sont propres
au secteur des cosmétiques, la majeure partie des approches écrites existantes pour le secteur
agroalimentaire n’étant pas directement transposables aux cosmétiques. Elles reflètent un avis
scientifique et offrent des principes pour un cadre logique cohérent applicable aux ingrédients et
produits cosmétiques naturels et biologiques, et ce, en tenant compte des approches communes
adoptées dans les références existantes.
L’objet de la série ISO 16128 est d’encourager un plus large choix d’ingrédients et produits cosmétiques
naturels et biologiques dans la formulation d’une plus grande variété de produits cosmétiques afin de
favoriser l’innovation.
L’objectif du présent document est d’aider les fabricants d’ingrédients et les entreprises de cosmétiques,
voire tout lecteur, à qualifier les ingrédients cosmétiques de naturels, dérivés de matériaux naturels ou
non naturels lors de l’application de la série ISO 16128.
RAPPORT TECHNIQUE ISO/TR 23750:2021(F)
Cosmétiques — Réponses aux questions fréquentes sur la
caractérisation des ingrédients et produits conformément
à l’ISO 16128-1 et l’ISO 16128-2
1 Domaine d’application
Le présent document apporte des réponses aux questions qui peuvent se poser lors du calcul des indices
et contenus conformément à l’ISO 16128-1 et l’ISO 16128-2.
Il clarifie les conditions relatives aux procédés, solvants et sources de carbone permettant de qualifier
les ingrédients suivant la série ISO 16128. Des exemples détaillés expliquant comment utiliser la série
ISO 16128 sont également présentés.
2 Références normatives
Le présent document ne contient aucune référence normative.
3 Termes et définitions
Aucun terme n’est défini dans le présent document.
L’ISO et l’IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en
normalisation, consultables aux adresses suivantes:
— ISO Online browsing platform: disponible à l’adresse https:// www .iso .org/ obp
— IEC Electropedia: disponible à l’adresse http:// www .electropedia .org/
4 Questions et réponses
4.1 Généralités
Tableau 1 — Questions générales
o
N Question Réponse
0 Comment un fabricant d’ingrédients et/ou un Il est recommandé aux fabricants d’ingrédients de fournir
fabricant de cosmétiques peuvent-ils attribuer aux fabricants de cosmétiques les informations relatives à
une catégorie et un indice à un ingrédient? la composition, à l’origine et au traitement des ingrédients,
afin qu’ils déterminent les indices d’ingrédients. Pour
chaque ingrédient, les fabricants de cosmétiques vérifient
la catégorie et l’indice d’après les informations fournies. Par
conséquent, le dialogue entre fabricants d’ingrédients et de
cosmétiques est vivement encouragé.
1 Quelles sont les différences entre les termes Une matière première cosmétique est un ingrédient ou un
suivants: ingrédient, substance, matière pre- mélange d’ingrédients. Un ingrédient est une substance, c’est-
mière et matière renouvelable? à-dire un élément chimique et ses composés à l’état naturel
ou le résultat d’un procédé de fabrication, à l’exclusion de tout
solvant qui peut être séparé sans affecter la stabilité de la
substance ou modifier sa composition. Certaines substances
sont renouvelables si elles se régénèrent naturellement à une
vitesse au moins identique à leur consommation.
Tableau 1 (suite)
o
N Question Réponse
2 Quel est le lien entre la définition d’un extrait Un extrait est une substance ou un mélange de substances.
et sa composition INCI? Dans la plupart des cas, sa désignation INCI est la même
que l’ingrédient naturel dont il provient et, le cas échéant,
la ou les désignations INCI du ou des solvants ingrédients
utilisés pour l’extraction.
3 Les listes d’ingrédients INCI peuvent-elles Non. Pour déterminer cela, plus d’informations sont né-
être utilisées pour déterminer si un produit cessaires. Les ingrédients INCI peuvent être produits de
est naturel, dérivé de matériaux naturels ou différentes façons et les solvants de procédé employés
non naturel? n’apparaissent pas dans la liste des ingrédients INCI. Par
exemple, il est possible que deux produits, dont la liste des
désignations INCI est parfaitement identique, soient classés
différemment lors de l’application des méthodes spécifiées
dans l’ISO 16128-1.
4 Quel est le lien entre les différentes catégories L’ISO 16128-1 spécifie deux catégories de solvants: les sol-
de solvants et leur nomenclature INCI? vants ingrédients et les solvants de procédé, qui sont définis
dans l’ISO 16128-1:2016, Annexe A. Les solvants ingrédients
apparaissent dans la liste des ingrédients INCI. Les solvants
de procédé ne subsistent pas dans l’ingrédient (sauf à l’état de
traces) et n’apparaissent pas dans la liste d’ingrédients INCI.
4.2 Ingrédients naturels
Selon l’ISO 16128-1, les ingrédients naturels sont des ingrédients cosmétiques obtenus exclusivement à
partir de végétaux, d’animaux, de micro-organismes ou de minéraux, y compris les ingrédients obtenus
à partir de ces matériaux résultant:
— de procédés physiques (tels que broyage, séchage, distillation);
— de réactions de fermentation existant dans la nature et conduisant à des molécules existant à l’état
naturel; et
— d’autres modes opératoires de préparation, y compris des méthodes traditionnelles (par exemple,
extraction à l’aide de solvants) sans intention de modifier chimiquement l’ingrédient.
Voir Tableau 2.
Tableau 2 — Questions sur les ingrédients naturels
o
N Question Réponse
5 Comment l’eau est-elle définie dans l’ISO 16128- L’eau est définie comme étant toujours naturelle dans
1? l’ISO 16128-1:2016, 2.4.
6 La définition de l’eau de cristallisation ne figure En chimie, l’eau de cristallisation consiste en des molécules
pas dans l’ISO 16128-1. Quelle est sa définition? d’eau présentes à l’intérieur de cristaux de minéraux. Elle peut
être considérée comme de l’eau de constitution à l’intérieur
de minéraux naturels. Dans les cas où l’eau est ou ajoutée
pendant une réaction ou produite après celle-ci, elle est
considérée comme étant de l’eau de formulation.
7 Comment l’eau florale obtenue par distillation Elle est classée comme eau d’extraction.
est-elle classée dans l’ISO 16128-1?
8 Les ingrédients comme l’éthanol, les acides Oui. Tant que la matière de base est naturelle,
...
RAPPORT ISO/TR
TECHNIQUE 23750
Première édition
2021-08
Cosmétiques — Réponses aux
questions fréquentes sur la
caractérisation des ingrédients et
produits conformément à l’ISO 16128-
1 et l’ISO 16128-2
Cosmetics — Answers to frequently asked questions on ingredients
and product characterization according to ISO 16128-1 and ISO
16128-2
Numéro de référence
©
ISO 2021
DOCUMENT PROTÉGÉ PAR COPYRIGHT
© ISO 2021
Tous droits réservés. Sauf prescription différente ou nécessité dans le contexte de sa mise en œuvre, aucune partie de cette
publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique,
y compris la photocopie, ou la diffusion sur l’internet ou sur un intranet, sans autorisation écrite préalable. Une autorisation peut
être demandée à l’ISO à l’adresse ci-après ou au comité membre de l’ISO dans le pays du demandeur.
ISO copyright office
Case postale 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Genève
Tél.: +41 22 749 01 11
E-mail: copyright@iso.org
Web: www.iso.org
Publié en Suisse
ii © ISO 2021 – Tous droits réservés
Sommaire Page
Avant-propos .iv
Introduction .v
1 Domaine d’application . 1
2 Références normatives . 1
3 Termes et définitions . 1
4 Questions et réponses . 1
4.1 Généralités . 1
4.2 Ingrédients naturels . 2
4.3 Procédés physiques des ingrédients naturels . 3
4.4 Fermentation d’ingrédients naturels . 6
4.5 Solvants de procédé . 7
4.6 Ingrédients minéraux . 8
4.7 Ingrédients dérivés de matériaux naturels . 9
4.8 Calcul de l’indice d’origine naturelle .11
4.9 Exemples .14
4.10 Autres procédés chimiques et biologiques .15
4.11 Indice et contenu .15
4.12 Autres FAQ .17
Annexe A (Informative) Principes de chimie verte mentionnés dans l’ISO 16128-1:2016,
Annexe B .18
Bibliographie .19
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes
nationaux de normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est
en général confiée aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude
a le droit de faire partie du comité technique créé à cet effet. Les organisations internationales,
gouvernementales et non gouvernementales, en liaison avec l'ISO participent également aux travaux.
L'ISO collabore étroitement avec la Commission électrotechnique internationale (IEC) en ce qui
concerne la normalisation électrotechnique.
Les procédures utilisées pour élaborer le présent document et celles destinées à sa mise à jour sont
décrites dans les Directives ISO/IEC, Partie 1. Il convient, en particulier, de prendre note des différents
critères d'approbation requis pour les différents types de documents ISO. Le présent document a été
rédigé conformément aux règles de rédaction données dans les Directives ISO/IEC, Partie 2 (voir www
.iso .org/ directives).
L'attention est attirée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable
de ne pas avoir identifié de tels droits de propriété et averti de leur existence. Les détails concernant
les références aux droits de propriété intellectuelle ou autres droits analogues identifiés lors de
l'élaboration du document sont indiqués dans l'Introduction et/ou dans la liste des déclarations de
brevets reçues par l'ISO (voir www .iso .org/ brevets).
Les appellations commerciales éventuellement mentionnées dans le présent document sont données
pour information, par souci de commodité, à l’intention des utilisateurs et ne sauraient constituer un
engagement.
Pour une explication de la nature volontaire des normes, la signification des termes et expressions
spécifiques de l'ISO liés à l'évaluation de la conformité, ou pour toute information au sujet de l'adhésion
de l'ISO aux principes de l’Organisation mondiale du commerce (OMC) concernant les obstacles
techniques au commerce (OTC), voir www .iso .org/ avant -propos.
Le présent document a été élaboré par le comité technique ISO/TC 217, Cosmétiques.
Il convient que l’utilisateur adresse tout retour d’information ou toute question concernant le présent
document à l’organisme national de normalisation de son pays. Une liste exhaustive desdits organismes
se trouve à l’adresse www .iso .org/ fr/ members .html.
iv © ISO 2021 – Tous droits réservés
Introduction
La série ISO 16128 fournit des lignes directrices relatives aux définitions et aux critères applicables
aux ingrédients et produits cosmétiques naturels et biologiques. Ces lignes directrices sont propres
au secteur des cosmétiques, la majeure partie des approches écrites existantes pour le secteur
agroalimentaire n’étant pas directement transposables aux cosmétiques. Elles reflètent un avis
scientifique et offrent des principes pour un cadre logique cohérent applicable aux ingrédients et
produits cosmétiques naturels et biologiques, et ce, en tenant compte des approches communes
adoptées dans les références existantes.
L’objet de la série ISO 16128 est d’encourager un plus large choix d’ingrédients et produits cosmétiques
naturels et biologiques dans la formulation d’une plus grande variété de produits cosmétiques afin de
favoriser l’innovation.
L’objectif du présent document est d’aider les fabricants d’ingrédients et les entreprises de cosmétiques,
voire tout lecteur, à qualifier les ingrédients cosmétiques de naturels, dérivés de matériaux naturels ou
non naturels lors de l’application de la série ISO 16128.
RAPPORT TECHNIQUE ISO/TR 23750:2021(F)
Cosmétiques — Réponses aux questions fréquentes sur la
caractérisation des ingrédients et produits conformément
à l’ISO 16128-1 et l’ISO 16128-2
1 Domaine d’application
Le présent document apporte des réponses aux questions qui peuvent se poser lors du calcul des indices
et contenus conformément à l’ISO 16128-1 et l’ISO 16128-2.
Il clarifie les conditions relatives aux procédés, solvants et sources de carbone permettant de qualifier
les ingrédients suivant la série ISO 16128. Des exemples détaillés expliquant comment utiliser la série
ISO 16128 sont également présentés.
2 Références normatives
Le présent document ne contient aucune référence normative.
3 Termes et définitions
Aucun terme n’est défini dans le présent document.
L’ISO et l’IEC tiennent à jour des bases de données terminologiques destinées à être utilisées en
normalisation, consultables aux adresses suivantes:
— ISO Online browsing platform: disponible à l’adresse https:// www .iso .org/ obp
— IEC Electropedia: disponible à l’adresse http:// www .electropedia .org/
4 Questions et réponses
4.1 Généralités
Tableau 1 — Questions générales
o
N Question Réponse
0 Comment un fabricant d’ingrédients et/ou un Il est recommandé aux fabricants d’ingrédients de fournir
fabricant de cosmétiques peuvent-ils attribuer aux fabricants de cosmétiques les informations relatives à
une catégorie et un indice à un ingrédient? la composition, à l’origine et au traitement des ingrédients,
afin qu’ils déterminent les indices d’ingrédients. Pour
chaque ingrédient, les fabricants de cosmétiques vérifient
la catégorie et l’indice d’après les informations fournies. Par
conséquent, le dialogue entre fabricants d’ingrédients et de
cosmétiques est vivement encouragé.
1 Quelles sont les différences entre les termes Une matière première cosmétique est un ingrédient ou un
suivants: ingrédient, substance, matière pre- mélange d’ingrédients. Un ingrédient est une substance, c’est-
mière et matière renouvelable? à-dire un élément chimique et ses composés à l’état naturel
ou le résultat d’un procédé de fabrication, à l’exclusion de tout
solvant qui peut être séparé sans affecter la stabilité de la
substance ou modifier sa composition. Certaines substances
sont renouvelables si elles se régénèrent naturellement à une
vitesse au moins identique à leur consommation.
Tableau 1 (suite)
o
N Question Réponse
2 Quel est le lien entre la définition d’un extrait Un extrait est une substance ou un mélange de substances.
et sa composition INCI? Dans la plupart des cas, sa désignation INCI est la même
que l’ingrédient naturel dont il provient et, le cas échéant,
la ou les désignations INCI du ou des solvants ingrédients
utilisés pour l’extraction.
3 Les listes d’ingrédients INCI peuvent-elles Non. Pour déterminer cela, plus d’informations sont né-
être utilisées pour déterminer si un produit cessaires. Les ingrédients INCI peuvent être produits de
est naturel, dérivé de matériaux naturels ou différentes façons et les solvants de procédé employés
non naturel? n’apparaissent pas dans la liste des ingrédients INCI. Par
exemple, il est possible que deux produits, dont la liste des
désignations INCI est parfaitement identique, soient classés
différemment lors de l’application des méthodes spécifiées
dans l’ISO 16128-1.
4 Quel est le lien entre les différentes catégories L’ISO 16128-1 spécifie deux catégories de solvants: les sol-
de solvants et leur nomenclature INCI? vants ingrédients et les solvants de procédé, qui sont définis
dans l’ISO 16128-1:2016, Annexe A. Les solvants ingrédients
apparaissent dans la liste des ingrédients INCI. Les solvants
de procédé ne subsistent pas dans l’ingrédient (sauf à l’état de
traces) et n’apparaissent pas dans la liste d’ingrédients INCI.
4.2 Ingrédients naturels
Selon l’ISO 16128-1, les ingrédients naturels sont des ingrédients cosmétiques obtenus exclusivement à
partir de végétaux, d’animaux, de micro-organismes ou de minéraux, y compris les ingrédients obtenus
à partir de ces matériaux résultant:
— de procédés physiques (tels que broyage, séchage, distillation);
— de réactions de fermentation existant dans la nature et conduisant à des molécules existant à l’état
naturel; et
— d’autres modes opératoires de préparation, y compris des méthodes traditionnelles (par exemple,
extraction à l’aide de solvants) sans intention de modifier chimiquement l’ingrédient.
Voir Tableau 2.
Tableau 2 — Questions sur les ingrédients naturels
o
N Question Réponse
5 Comment l’eau est-elle définie dans l’ISO 16128- L’eau est définie comme étant toujours naturelle dans
1? l’ISO 16128-1:2016, 2.4.
6 La définition de l’eau de cristallisation ne figure En chimie, l’eau de cristallisation consiste en des molécules
pas dans l’ISO 16128-1. Quelle est sa définition? d’eau présentes à l’intérieur de cristaux de minéraux. Elle peut
être considérée comme de l’eau de constitution à l’intérieur
de minéraux naturels. Dans les cas où l’eau est ou ajoutée
pendant une réaction ou produite après celle-ci, elle est
considérée comme étant de l’eau de formulation.
7 Comment l’eau florale obtenue par distillation Elle est classée comme eau d’extraction.
est-elle classée dans l’ISO 16128-1?
8 Les ingrédients comme l’éthanol, les acides Oui. Tant que la matière de base est naturelle,
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.