SIST-TS CEN/TS 16157-12:2022
(Main)Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 12: Facility related publications
Intelligent transport systems - DATEX II data exchange specifications for traffic management and information - Part 12: Facility related publications
This new workitem will publish the 12th part of the DATEX II Technical Specifications which defines a new DATEX II namespace “FacilityRelated” and sub-models on the following facility related topics:
• Dimensions
• Equipment or service facilities
• Operating hours
• Organisations
• Tariffs and Payment
These sub-models can be directly accessed and used by other namespaces resp. other parts of the DATEX standard series, as for example by the energy infrastructure publication or the parking publications. By providing a couple of Publications within this new Part 12 (for example OperatingHoursPublication), it is also possible to specify and publish stand-alone information on the abovementioned topics and just doing a reference on this data elsewhere.
Intelligente Verkehrssysteme - Datex II Datenaustauschspezifikationen für Verkehrsmanagement und Verkehrsinformationen - Teil 12: Publikationen im Zusammenhang mit Einrichtungen
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri upravljanju prometa in informiranju - 12. del: Publikacije v zvezi z objekti
Na podlagi te nove delovne postavke bo objavljen 12. del tehničnih specifikacij DATEX II, ki opredeljuje nov imenski prostor DATEX II »FacilityRelated« in podmodele za naslednje teme, povezane z objekti:
• mere;
• oprema ali storitveni objekti;
• delovni čas;
• organizacije;
• tarife in plačilo.
Do teh podmodelov lahko neposredno dostopajo in jih uporabljajo drugi imenski prostori oziroma drugi deli skupine standardov DATEX, kot na primer publikacija o energetski infrastrukturi ali publikacije o parkiriščih. Z zagotavljanjem nekaj publikacij v tem novem 12. delu (na primer OperatingHoursPublication) je mogoče določiti in objaviti tudi samostojne informacije o zgoraj navedenih temah in preprosto vključiti sklice na te podatke drugje.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16157-12:2022
01-september-2022
Inteligentni transportni sistemi - Specifikacije za izmenjavo podatkov DATEX II pri
upravljanju prometa in informiranju - 12. del: Publikacije v zvezi z objekti
Intelligent transport systems - DATEX II data exchange specifications for traffic
management and information - Part 12: Facility related publications
Intelligente Verkehrssysteme - Datex II Datenaustauschspezifikationen für
Verkehrsmanagement und Verkehrsinformationen - Teil 12: Publikationen im
Zusammenhang mit Einrichtungen
Ta slovenski standard je istoveten z: CEN/TS 16157-12:2022
ICS:
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST-TS CEN/TS 16157-12:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16157-12:2022
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
May 2022
TECHNISCHE SPEZIFIKATION
ICS 35.240.60
English Version
Intelligent transport systems - DATEX II data exchange
specifications for traffic management and information -
Part 12: Facility related publications
Intelligente Verkehrssysteme - Datex II
Datenaustauschspezifikationen für
Verkehrsmanagement und Verkehrsinformationen -
Teil 12: Publikationen im Zusammenhang mit
Einrichtungen
This Technical Specification (CEN/TS) was approved by CEN on 20 March 2022 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16157-12:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
Contents
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 8
3 Terms and definitions . 8
4 Symbols and abbreviations . 8
5 Conformance . 8
6 UML notation . 9
7 «D2Namespace» Facilities . 9
7.1 Overview . 9
7.2 «D2Package» Facilities . 9
7.2.1 Overview . 9
7.2.2 Semantics . 12
7.3 «D2Package» Dimension . 12
7.3.1 Overview . 12
7.3.2 Semantics . 13
7.4 «D2Package» OrganisationPublication . 13
7.4.1 Overview . 13
7.4.2 Semantics . 15
7.5 «D2Package» RatesPublication . 16
7.5.1 Overview . 16
7.5.2 Semantics . 19
7.6 «D2Package» SupplementalFacility . 21
7.6.1 Overview . 21
7.6.2 Semantics . 22
7.7 «D2Package» OperatingHoursPublication . 25
7.7.1 Overview . 25
7.7.2 Semantics . 26
7.8 Data types . 27
7.9 Duration value . 28
8 LocationExtension and EmissionsExtension in «D2Namespace» Extension . 28
8.1 FacilityLocation (Address) . 28
8.2 EmissionsExtension . 29
Annex A (normative) Data Dictionary for «D2Namespace» Facilities . 30
A.1 Overview . 30
A.2 Data Dictionary for "Facilities" . 31
A.2.1 "DataValue" package. 31
A.2.2 "Dimension" package . 32
A.2.3 "Eligibility" package . 33
A.2.4 "Facility" package . 36
A.2.5 "OperatingHoursPublication" package . 40
A.2.6 "OrganisationPublication" package . 45
A.2.7 "PaymentMethod" package . 51
2
---------------------- Page: 4 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
A.2.8 "Rates" package . 53
A.2.9 "Right" package . 64
A.2.10 "SupplementalFacility" package . 67
A.3 Data Dictionary of ≤≤D2Datatype≥≥ for "Facilities" . 71
A.3.1 Introduction. 71
A.3.2 The ≤≤D2Datatype≥≥ "AmountOfMoney" . 71
A.3.3 The ≤≤D2Datatype≥≥ "CurrencyCode" . 71
A.3.4 The ≤≤D2Datatype≥≥ "Duration". 71
A.3.5 The ≤≤D2Datatype≥≥ "IndexReference" . 71
A.3.6 The ≤≤D2Datatype≥≥ "SquareMetres" . 71
A.3.7 The ≤≤D2Datatype≥≥ "TimeZone" . 71
A.4 Data Dictionary of ≤≤D2Enumeration≥≥ for "Facilities" . 71
A.4.1 Introduction. 71
A.4.2 The ≤≤D2Enumeration≥≥ "AccessibilityEnum" . 71
A.4.3 The ≤≤D2Enumeration≥≥ "AvailabilityEnum" . 72
A.4.4 The ≤≤D2Enumeration≥≥ "CredentialTypeEnum" . 72
A.4.5 The ≤≤D2Enumeration≥≥ "EnergySourceEnum" . 73
A.4.6 The ≤≤D2Enumeration≥≥ "EquipmentTypeEnum" . 74
A.4.7 The ≤≤D2Enumeration≥≥ "FacilityTypeEnum" . 76
A.4.8 The ≤≤D2Enumeration≥≥ "ImageFormatEnum" . 77
A.4.9 The ≤≤D2Enumeration≥≥ "MeansOfPaymentEnum" . 77
A.4.10 The ≤≤D2Enumeration≥≥ "OpeningStatusEnum". 78
A.4.11 The ≤≤D2Enumeration≥≥ "OperationStatusEnum" . 79
A.4.12 The ≤≤D2Enumeration≥≥ "OrganisationTypeEnum" . 79
A.4.13 The ≤≤D2Enumeration≥≥ "PaymentBrandsEnum" . 79
A.4.14 The ≤≤D2Enumeration≥≥ "PaymentTimingEnum" . 80
A.4.15 The ≤≤D2Enumeration≥≥ "RateAvailabilityTypeEnum" . 80
A.4.16 The ≤≤D2Enumeration≥≥ "RateLineTypeEnum" . 81
A.4.17 The ≤≤D2Enumeration≥≥ "RateTypeEnum" . 81
A.4.18 The ≤≤D2Enumeration≥≥ "RateUsageConditionsTypeEnum" . 81
A.4.19 The ≤≤D2Enumeration≥≥ "RefundTypeEnum" . 81
A.4.20 The ≤≤D2Enumeration≥≥ "ReservationTypeEnum" . 82
A.4.21 The ≤≤D2Enumeration≥≥ "RightTypeEnum" . 82
A.4.22 The ≤≤D2Enumeration≥≥ "ServiceFacilityTypeEnum" . 83
A.4.23 The ≤≤D2Enumeration≥≥ "SurchargeTypeEnum" . 84
A.4.24 The ≤≤D2Enumeration≥≥ "UserTypeEnum" . 84
Annex B (normative) Data Dictionary for «D2Namespace» Extension . 86
B.1 Overview . 86
B.2 Data Dictionary for "Extension" . 87
B.2.1 "CommonExtension" package . 87
B.2.2 "LocationExtension" package . 88
B.3 Data Dictionary of ≤≤D2Datatype≥≥ for "Extension" . 91
B.3.1 Introduction. 91
B.3.2 The ≤≤D2Datatype≥≥ "TimeZone" . 91
B.4 Data Dictionary of ≤≤D2Enumeration≥≥ for "Extension" . 91
B.4.1 Introduction. 91
B.4.2 The ≤≤D2Enumeration≥≥ "AddressLineTypeEnum" . 91
3
---------------------- Page: 5 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
Annex C (normative) Referenced XML Schema . 92
C.1 Overview . 92
C.2 Schema for «D2Namespace» Facilities . 92
C.3 Schema for «D2Namespace» CommonExtension . 149
C.4 Schema for «D2Namespace» LocationExtension . 149
Annex D (informative) Differences from prISO 5206-1 . 152
D.1 Differences from prISO 5206-1 . 152
Bibliography. 154
4
---------------------- Page: 6 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
European foreword
This document (CEN/TS 16157-12:2022) has been prepared by Technical Committee CEN/TC 278
“Intelligent transport systems”, the secretariat of which is held by NEN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
EN 16157 series consists of several parts under the general title “Intelligent transport systems —
DATEX II data exchange specifications for traffic management and information”. Other parts may be
developed in the future.
For users of this document, attention is drawn to the resources of www.datex2.eu. This web site
contains related software tools and software resources that aid the implementation of EN 16157
DATEX II.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association and supports essential requirements of EU Directive(s).
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
5
---------------------- Page: 7 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
Introduction
This document defines a common set of data exchange specifications to support the vision of a seamless
interoperable exchange of traffic and travel information across boundaries, including national, urban,
interurban, road administrations, infrastructure providers and service providers. Standardisation in
this context is a vital constituent to ensure interoperability, reduction of risk, reduction of the cost base,
promotion of open marketplaces and many social, economic and community benefits to be gained from
more informed travellers, network managers and transport operators.
Delivering European Transport Policy in line with the White Paper issued by the European Commission
requires co-ordination of traffic management and development of seamless pan European services.
With the aim to support sustainable mobility in Europe, the European Commission has been supporting
the development of information exchange mainly between the actors of the road traffic management
domain for a number of years. In the road sector, DATEX II has been long in fruition, with the European
Commission being fundamental to its development through an initial contract and subsequent co-
funding through the Euro-Regional projects. With this standardisation of DATEX II, there is a real basis
for common exchange between the actors of the traffic and travel information sector.
This document includes the framework and context for exchanges, the modelling approach, data
content, data structure and relationships.
This document supports a methodology that is extensible.
th
The 12 part of the CEN/TS 16157 - EN 16157 series (this document) deals with information on
facilities. It defines a new DATEX II namespace “Facilities” and sub-models on the following facility
related topics:
— Dimensions;
— Equipment or service facilities;
— Operating hours;
— Organisations;
— Rates.
These sub-models can be directly accessed and used by namespaces defined in other parts of the
DATEX standard series by specialising the Facility or the FacilityStatus class, as for example, by the
energy infrastructure publication or the parking publications. By providing a couple of Publications
within this new Part 12 (for example, "OperatingHoursPublication"), it is also possible to specify and
publish stand-alone information on the above-mentioned topics and just reference this data elsewhere.
In normative Annex A, the data dictionary for the «D2Namespace» Facilities is specified.
In normative Annex C, the referenced XML schema for the «D2Namespace» Facilities is specified.
The European Committee for Standardisation (CEN) draws attention to the fact that it is claimed that
compliance with this document may involve the use of a patent concerning procedures, methods and/or
formats given in this document.
CEN takes no position concerning the evidence, validity and scope of patent rights.
6
---------------------- Page: 8 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
1 Scope
This document specifies and defines component facets supporting the exchange and shared use of data
and information in the field of traffic and travel.
The component facets include the framework and context for exchanges, the modelling approach, data
content, data structure and relationships.
This document is applicable to:
— Traffic and travel information which is of relevance to road networks (non-urban and urban) ;
— Public transport information that is of direct relevance to the use of a road network (e.g. road link
via train or ferry service) ;
— Traffic and travel information in the case of Cooperative intelligent transport systems (C-ITS).
This document establishes specifications for data exchange between any two instances of the following
actors:
— Traffic Information Centres (TICs);
— Traffic Control Centres (TCCs);
— Service Providers (SPs);
— Use of this document may be applicable for other actors.
This document series covers, at least, the following types of informational content:
— Road traffic event information – planned and unplanned occurrences both on the road network and
in the surrounding environment;
— Operator initiated actions;
— Road traffic measurement data, status data, and travel time data;
— Travel information relevant to road users, including weather and environmental information;
— Road traffic management information and instructions relating to use of the road network.
This Part of CEN/TS 16157 specifies the informational structures, relationships, association ends,
attributes and associated data types required for publishing information about facilities within the
DATEX II framework. This is specified as a DATEX II "Facilities" namespace, which is part of the DATEX
II platform independent model, but this Part excludes those elements that are specified in EN 16157-2
(Location referencing) and EN 16157-7 (Common data elements).
7
---------------------- Page: 9 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 16157-1, Intelligent transport systems - DATEX II data exchange specifications for traffic management
and information - Part 1: Context and framework
EN 16157-2, Intelligent transport systems - DATEX II data exchange specifications for traffic management
and information - Part 2: Location referencing
EN 16157-7, Intelligent transport systems - DATEX II data exchange specifications for traffic management
and information - Part 7: Common data elements
ISO/IEC 19505-1:2012, Information technology — Object Management Group Unified Modeling Language
(OMG UML) — Part 1: Infrastructure
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 16157-1, EN 16157-2,
EN 16157-7 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at http://www.electropedia.org/
3.1
facility
any kind of site, building, structure, including also service- or supplemental facilities and equipment
4 Symbols and abbreviations
ETRS89 European Terrestrial Reference System 1989
EU European Union
GUID Globally Unique Identifier
HTML Hyper text mark-up language
IP Internet Protocol
PDF Portable document format created by Adobe
UML Unified Modeling Language
URL Uniform Resource Locator
5 Conformance
The DATEX II platform independent data model of which the Facilities Publications models are a part,
corresponds to the Level A model as defined in EN 16157-1.
Conformance with this Part shall require platform independent models from which platform specific
models are generated to comply with the UML modelling rules defined in EN 16157-1 and with the
following requirements of the models which are expressed in this part.
8
---------------------- Page: 10 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
6 UML notation
The UML notation used in these Technical Specifications shall be as described in ISO/IEC 19505-1:2012
and in compliance with the methodology specified in EN 16157-1.
7 «D2Namespace» Facilities
7.1 Overview
This namespace shall define a facility class structure with properties that are related to all kind of
facilities, for example, parking sites or energy stations.
For some of the elements it shall be possible to specify a separate publication. By this construct, it will
be possible to predefine sets and to reference them later.
The following elements are included in this namespace:
— «D2Package» Facility – An abstract facility class structure that utilises the elements of the hereafter
following packages;
— «D2Package» Dimension – Dimensions of facilities;
— «D2Package» OrganisationPublication – Organisation data with contact information;
— «D2Package» RatesPublication – A generic structure for tariffs and payment;
— «D2Package» SupplementalFacility – Equipment and service facilities supplemental to some origin
facility, offering all facility properties theirself;
— «D2Package» OperatingHoursPublication – Operating hours of facilities.
The namespace includes further data types, data values and enumerations that are integral part of the
above model parts.
The prefix of the namespace shall be "fac".
Some of the packages and individual classes used within the “Facilities” namespace reside in the
namespaces “Common” and "Location" defined in EN 16157-7 and EN 16157-2.
The classes, attributes, data types and enumerations that are specific to the namespace "Facilities" are
defined in the normative Annex A.
The classes, attributes, data types and enumerations that are specific to two additional extensions
specified in clause 8 are defined in the normative Annex B.
The XML schema corresponding to this namespace is provided in the normative Annex C.
7.2 «D2Package» Facilities
7.2.1 Overview
The "Facility" and "FacilityObject" class shall form an abstract class structure that utilises the elements
of the hereafter following clauses. Classes from other namespaces may specialise the Facility class to
inherit the features of a facility described in this document – see Figure 1.
9
---------------------- Page: 11 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
Figure 1 — The facility class structure
10
---------------------- Page: 12 ----------------------
SIST-TS CEN/TS 16157-12:2022
CEN/TS 16157-12:2022 (E)
Example: An EnergyInfrastructureSite from Namespace EnergyInfrastructure (specified in CEN/TS 16157-10) is a
specialisation of a Facility, and thus information on
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.