SIST EN 13286-1:2004
(Main)Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling
This European Standard specifies a number of methods for the determination of the relationship between the moisture content and the density under specified test conditions. The test results provide an estimate of the mixture density that can be achieved on construction sites and provides a reference parameter for assessing the density of the compacted layer of the mixture.
Ungebundene und hydraulisch gebundene Gemische - Teil 1: Laborprüfverfahren für die Trockendichte und den Wassergehalt - Einführung, allgemeine Anforderungen und Probenahme
Diese Europäische Norm legt eine Anzahl von Verfahren fest, mit denen die Beziehung zwischen dem Wassergehalt und der Dichte ungebundener und hydraulisch gebundener Gemische unter vorgegebenen Prüfbedingungen ermittelt werden kann. Die Prüfergebnisse liefern einen Anhaltswert für die auf der Baustelle erreichbare Dichte des Gemisches und einen Bezugsparameter zur Beurteilung der Dichte einer verdichteten Schicht des Gemisches.
Die Prüfergebnisse werden als Grundlage für die Festlegung von Anforderungen an hydraulisch gebundene und ungebundene Gemische vor ihrer Verwendung im Straßenbau angewendet werden. Die Prüfergebnisse lassen auch erkennen, bei welchem Wassergehalt ein Gemisch sich günstig verdichten lässt, um bestimmte Trockendichten zu erreichen.
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 1: Méthode d'essai de détermination en laboratoire de la masse volumique de référence et la teneur en eau - Introduction et exigences générales
La présente Norme européenne spécifie un certain nombre de méthodes de détermination du rapport existant entre la teneur en eau et la masse volumique de mélanges non traités et de mélanges traités aux liants hydrauliques, dans des conditions d'essai spécifiées. Les résultats d'essai fournissent une estimation de la masse volumique qu'il est possible d'obtenir sur les chantiers avec ce matériau et constituent un parametre de référence pour évaluer la masse volumique de la couche de matériau apres compactage.
Les résultats d'essai peuvent etre utilisés comme base pour spécifier les exigences des mélanges non traités et de mélanges traités aux liants hydrauliques avant leur mise en ?uvre dans les chaussées. Ces résultats d'essai permettent aussi de déduire la teneur en eau a laquelle le matériau est le plus facile a compacter pour obtenir une masse volumique donnée.
Nevezane in hidravlično vezane zmesi – 1. del: Preskusne metode za laboratorijsko referenčno gostoto/in vsebnost vode – Uvod, splošne zahteve in vzorčenje
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DY]RUþHQMHUngebundene und hydraulisch gebundene Gemische - Teil 1: Laborprüfverfahren für die Trockendichte und den Wassergehalt - Einführung, allgemeine Anforderungen und ProbenahmeMélanges traités et mélanges non traités aux liants hydrauliques - Partie 1: Méthode d'essai de détermination en laboratoire de la masse volumique de référence et la teneur en eau - Introduction et exigences généralesUnbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density and water content - Introduction, general requirements and sampling93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13286-1:2003SIST EN 13286-1:2004en01-junij-2004SIST EN 13286-1:2004SLOVENSKI
STANDARD
SIST EN 13286-1:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13286-1March 2003ICS 93.080.20English versionUnbound and hydraulically bound mixtures - Part 1: Testmethods for laboratory reference density and water content -Introduction, general requirements and samplingMélanges traités et mélanges non traités aux liantshydrauliques - Partie 1: Méthodes d'essai pour la massevolumique de référence et la teneur en eau en laboratoire -Introduction, exigences générales et échantillonnageUngebundene und hydraulisch gebundene Gemische - Teil1: Laborprüfverfahren für die Trockendichte und denWassergehalt - Einführung, allgemeine Anforderungen undProbenahmeThis European Standard was approved by CEN on 12 December 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland andUnited Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13286-1:2003 ESIST EN 13286-1:2004
EN 13286-1:2003 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Principle.65Apparatus.86Test specimen preparation for other test methods.8Annex A (normative)
Sampling and sample reduction.9Bibliography.12SIST EN 13286-1:2004
EN 13286-1:2003 (E)3ForewordThis document (EN 13286-1:2003) has been prepared by Technical Committee CEN/TC 227 "Road Materials", thesecretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at thelatest by December 2003.This European Standard is one of a series of standards as follows:EN 13286-1, Unbound and hydraulically bound mixtures – Part 1: Test methods for laboratory reference densityand water content – Introduction, general requirements and sampling.prEN 13286-2, Unbound and hydraulically bound mixtures – Part 2: Test methods for laboratory reference densityand water content – Proctor compaction.EN 13286-3, Unbound and hydraulically bound mixtures – Part 3: Test methods for laboratory reference densityand water content – Vibrocompression with controlled parameters.EN 13286-4, Unbound and hydraulically bound mixtures – Part 4: Test methods for laboratory reference densityand water content – Vibrating hammer.EN 13286-5, Unbound and hydraulically bound mixtures – Part 5: Test methods for laboratory reference densityand water content – Vibrating table.prEN 13286-7, Unbound and hydraulically bound mixtures — Part 7: Cyclic load triaxial test for unbound mixtures.EN 13286-40, Unbound and hydraulically bound mixtures — Part 40: Test method for the determination of thedirect tensile strength of hydraulically bound mixtures.EN 13286-41, Unbound and hydraulically bound mixtures — Part 41: Test methods for the determination of thecompressive of strength of hydraulically bound mixtures.EN 13286-42, Unbound and hydraulically bound mixtures — Part 42: Test method for the determination of theindirect tensile strength of hydraulically bound mixtures.EN 13286-43, Unbound and hydraulically bound mixtures — Part 43: Test method for the determination of themodulus of elasticity of hydraulically bound mixtures.prEN 13286-44, Unbound and hydraulically bound mixtures — Part 44: Test method for the determination of thealpha coefficient of vitrified blastfurnace slag.prEN 13286-45, Unbound and hydraulically bound mixtures — Part 45: Test method for the determination of theworkability period of hydraulically bound mixtures.EN 13286-46, Unbound and hydraulically bound mixtures — Part 46: Test method for the determination of themoisture condition value.prEN 13286-47, Unbound and hydraulically bound mixtures — Part 47: Test method for the determination ofCalifornia bearing ratio, immediate bearing index and linear swelling.prEN 13286-48, Unbound and hydraulically bound mixtures — Part 48: Test method for the determination of thedegree of pulverisation.SIST EN 13286-1:2004
EN 13286-1:2003 (E)4prEN 13286-49, Unbound and hydraulically bound mixtures — Part 49: Test method for the determination of theaccelerated swelling of soil treated by lime and/or hydraulic binder.prEN 13286-50, Unbound and hydraulically bound mixtures — Part 50: Method for the manufacture of testspecimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction.prEN 13286-51, Unbound and hydraulically bound mixtures — Part 51: Method for the manufacture of testspecimens of hydraulically bound mixtures using vibrating hammer compaction.prEN 13286-52, Unbound and hydraulically bound mixtures — Part 52: Method for the manufacture of testspecimens of hydraulically bound mixtures using vibrocompression.prEN 13286-53, Unbound and hydraulically bound mixtures — Part 53: Method for the manufacture of testspecimens of hydraulically bound mixtures using axial compression.Annex A is normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovak Republic, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 13286-1:2004
EN 13286-1:2003 (E)51 ScopeThis European Standard specifies a number of test methods for the determination of the relationship between thewater content and the density of unbound and hydraulically bound mixtures under specified test conditions. Thetest results provide an estimate of the mixture density that can be achieved on construction sites and provides areference parameter for assessing the density of the compacted layer of the mixture.The test results are used as a basis for specifying requirements for hydraulically bound and unbound mixturesbefore use in road construction. The test result also allows a conclusion to be drawn as to the water content atwhich a mixture can be satisfactorily compacted in order to achieve a given density.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 932-1:1996, Tests for general properties of aggregates – Part 1: Methods for sampling.EN 932-2:1999, Tests for general properties of aggregates – Part 2: Methods for reducing laboratory samples.EN 932-5, Tests for general properties of ag
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.